Consider supporting us on TH-cam by using the button "JOIN" or click on this link: th-cam.com/channels/8KQ6_RNAvc7a3B5hZ980iQ.htmljoin Check out REBAKI24.PL and their YT CHANNEL goo.gl/xmFTPn
Bardzo mi się spodobał pana film ponieważ pokazuje cały proces powstawania tej maszyny . Sam przymierzam się do budowy takiej ale silnik 15 km i mechanizm 110 ale na pewno jeszcze tu zajrzę pozdrawiam i dziękuję
Dobra robota, dobry projekt. Nie ma wystarczającej ilości sprzęgła odłączającego silnik od mechanizmu, łatwo jest uruchomić silnik i kontynuować pracę.
Any absolutely beautiful machine that I'd love to have. Great craftsmanship and build quality! Thank you also for a quality video that matches the quality of your work.
Great concept. Question? Some of the wielding connections looked like there is a penetration issue. I confess, I’m learning to wield. This may be a bad question. I want you to be safe. Love watching you channel
Congratulations on the sponsorship. Your channel is starting to look quite professional. When did you switch from stick welding to mig? Judging by your gloves I guess it's an ESAB, excellent brand.
I like the way it appears to everyone that you created that right out of your head without plans. Nice work but 15 minutes of video of weeks of work right ?
excellent work. I'm honestly curious how you guys burn your wood in short chunks like that. do you just throw them in the stove or is there a method to burning the small unsplit chunks? thanks pal
Good morning, I recently purchased a R-80 device at REMET CNC, which also includes the flywheel pulley. I also have a Honda GS-200 engine (7 hp). I saw from your realization a double reduction of the engine revolutions, why? You have not connected the engine (always with belts) with the flywheel pulley, why? How many laps (rpm) does the R-80 mechanism do? Thank you.
Wow kolejny świetny film niewątpliwie jesteś jednym z najbardziej wartościowych twórców na polskim TH-cam i nie tylko. Nie wiem skąd bierzesz pomysły na te konstrukcje ale jestem w szoku jak człowiek potrafi być kreatywny. Jesteś w tym serio niesamowity i oby tak dalej
Brilliant machine! No doubt. However the wired mesh covering all spinning parts - You can easily have your clothes pulled in through one of those square holes in it or even finger (if you're clumsy enough). Especially when it is so close to those belts and pulleys. Am I right or just being picky? But yet again - great machine.
a czy przykładowo mogłaby być przekładnai bezpośrednio z silnika do takiego mechanizmu z tym, że szajba na silniku fi 60mm a na rębaku fi 400 mm ? zakładając ze obroty tego silnika to ok. 3200 ?
If you closed off that feed chute and used 4ft of 6 inch square tubing to feed in material it’d be orders of magnitude safer. Aside from that I’m calling this machine a stroke of maniacal mechanical genius. If you can ship to America we might need to talk in the not to distant future
Masz wielki zmysł do proporcji (albo dokładnie opracowujesz projekty ;-) ). Kombajn zgrabny jak mało który z widzianych w ogólnodostępnych źródłach. Jeśli to Ty nadałeś temu wymiary - podziwiam!
Film świetny jak zwykle. Tylko osłony na paski zrobiłbym z blachy bez orworów i uchwyt na worek z grubszej blachy lub jakieś usztywnienie bo traci trochę kształt i nieładnie to wygląda.
Witaj kolego, powiem ci szczerze że, twoje projekty są coraz bardziej skomplikowane, co mnie osobiście cieszy :D Mam jedno pytanie, jakiej spawarki mig używasz oraz czy warto ją kupić do majsterkowania? Pozdrawiam Mateusz
I Love All your Creations! You are One of my Most Favorite channels to Watch! I Love watching your great Building skills in action! Before you made this channel did you build things like professionally? Or did you just learn as you go? INCREDIBLE work as Always! Take care Bro! And Thanks for all Your Hard Work Editing these Videos and making awesome Machines/Tools. Youre The Best!!!
And so am I, man!!! So am I !!! And all this people are my teachers!! I spend hours 'n' hours and this is my adiction! But its a good healthy one! And I enjoy this a lot!!! Now I am searching on how to do a very different task: how to collect that powder from printer toner cassetes... I am selft taught and a multy task fellow too!!!
pedro tomé what do you do with the powder? Sounds very interesting! I think me and you are very similar! Lol i live in my Garage! Well not literally but as much time as i can spend creating or even watching videos on yt to learn lol
![Making Wood chipper mechanism [PLANS]](/img/n.gif)
Consider supporting us on TH-cam by using the button "JOIN" or click on this link:
th-cam.com/channels/8KQ6_RNAvc7a3B5hZ980iQ.htmljoin
Check out REBAKI24.PL and their YT CHANNEL goo.gl/xmFTPn
Made in Poland jaka cena bez ślinka
.
I wish these were available in the US. I have watched several of your videos, and am enthralled by your work.
I am a metal fabricator and welder as well by trade of 50 years. Great work.
A beast of a machine! I would be scared af to use it :') Well done
поляки - красавцы, я поражаюсь качеству вашей работы
Now doing our fall firewood and this machine would be welcomed addition!
Great to see Polish ingenuity at this level, well done sir!
I wish I had half of the enthusiasm, skill, ingenuity and creativity that you have!
Bardzo mi się spodobał pana film ponieważ pokazuje cały proces powstawania tej maszyny . Sam przymierzam się do budowy takiej ale silnik 15 km i mechanizm 110 ale na pewno jeszcze tu zajrzę pozdrawiam i dziękuję
Grade A work man pleasure to watch! Cheers from CANADA!
This video was totally worth the wait, good job mate!
Absolutely brilliant! Great fabrication, and a fantastic machine as a result 👍🏼
Pieknie to zrobiłeś. Szacun za osłony. Małe, mocne i sprytne.
молодцы ,парни.Красивая работа!5+
You're a man of many talents!! Keep up the great work and for giving us a lot good ideas.
Never seen such a splitting mechanism, this is very clever !
Another Made in Poland masterpiece. Low tech & built to last, as usual. Beautiful work brother. 👍👍
I like your home made torque multiplier attachment for tapping.
That is quite the machine! Thank you for showing us!
Can possible to adjust to very small pieces? So it will be supported for multi purpose. Thanks in Advance.
Dobra robota, dobry projekt. Nie ma wystarczającej ilości sprzęgła odłączającego silnik od mechanizmu, łatwo jest uruchomić silnik i kontynuować pracę.
Komposztalo gep hazilag
Unbelievable work man ...comgratulations !!!
Well.. this is cool. Makes me to want to buy my own forest, to get some wood splitted and chopped. Great work!
Any absolutely beautiful machine that I'd love to have. Great craftsmanship and build quality!
Thank you also for a quality video that matches the quality of your work.
Nice addition with the wire protection over The pulleys
Really nice job. Verry nice and professional made.
Super! Gdzie można takie 50 L worki nabyć?
This is better and safer than other dangerous contraptions.
Very talented guy - great job excellent engineering and build - i wish i had one - best wishes from the West coast of Ireland....!
You got another sub. Great machine and a great builder. No doubt I will see more of your builds. Have a great day
4:32 - at this moment a mysterious supervisor appeared! He thought it was all right, because he left fast!
How much does it cost to make this machine?
Where can I find the plans for the conversion of the circular saw to chop saw?
Great concept. Question? Some of the wielding connections looked like there is a penetration issue. I confess, I’m learning to wield. This may be a bad question. I want you to be safe. Love watching you channel
Man that things looks crazy dangerous (like all wood chippers). Good thing you've put the stop button at the front ^^
What do you do with these little pieces of wood, what are they burned in?
Great little Machine and an awsome build Video Buddy
So please tell me what you are burning this little stuff in?
Wish my welder was that smooth, it splutters like crazy
Jakiej spawarki używasz?
Is it a TIG welding or MIG weld?
Miło się ogląda zwłasza że firma REMETCNC znajduje się niedaleko mojej miejscowości
Ten kanał to jak promocja kraju 🇵🇱 Tak trzymaj! 💪🏻
Congratulations on the sponsorship. Your channel is starting to look quite professional. When did you switch from stick welding to mig? Judging by your gloves I guess it's an ESAB, excellent brand.
Dzień dobry jakiej tarczy używa pan do przecinarki. Super film
I like the way it appears to everyone that you created that right out of your head without plans. Nice work but 15 minutes of video of weeks of work right ?
excellent work. I'm honestly curious how you guys burn your wood in short chunks like that. do you just throw them in the stove or is there a method to burning the small unsplit chunks? thanks pal
Good morning, I recently purchased a R-80 device at REMET CNC, which also includes the flywheel pulley. I also have a Honda GS-200 engine (7 hp). I saw from your realization a double reduction of the engine revolutions, why? You have not connected the engine (always with belts) with the flywheel pulley, why? How many laps (rpm) does the R-80 mechanism do? Thank you.
Wow kolejny świetny film niewątpliwie jesteś jednym z najbardziej wartościowych twórców na polskim TH-cam i nie tylko. Nie wiem skąd bierzesz pomysły na te konstrukcje ale jestem w szoku jak człowiek potrafi być kreatywny. Jesteś w tym serio niesamowity i oby tak dalej
Trzeba mieć wyobraźnię i narzędzia to wystarczy :) wszystkiego idzie się nauczyć
if you were to make this machine for sale without the engine - as I have a 15 hp diesel engine what would your price be??
thanks.
Brilliant machine! No doubt. However the wired mesh covering all spinning parts - You can easily have your clothes pulled in through one of those square holes in it or even finger (if you're clumsy enough). Especially when it is so close to those belts and pulleys. Am I right or just being picky? But yet again - great machine.
a czy przykładowo mogłaby być przekładnai bezpośrednio z silnika do takiego mechanizmu z tym, że szajba na silniku fi 60mm a na rębaku fi 400 mm ? zakładając ze obroty tego silnika to ok. 3200 ?
Koło pasowe/zamachowe jakie dałeś? 20 czy 30 kg?
Awesome! Two death machines in one! Do you know where I can get a chipper mechanism like that in the USA?
Where did you buy pulleys from
Wow, this is amazing, really great machine. I respect You for commitment and invention!
Hi! what welding machine weld? good welds
If you closed off that feed chute and used 4ft of 6 inch square tubing to feed in material it’d be orders of magnitude safer. Aside from that I’m calling this machine a stroke of maniacal mechanical genius. If you can ship to America we might need to talk in the not to distant future
Masz wielki zmysł do proporcji (albo dokładnie opracowujesz projekty ;-) ). Kombajn zgrabny jak mało który z widzianych w ogólnodostępnych źródłach. Jeśli to Ty nadałeś temu wymiary - podziwiam!
Witam. Od czego są te koła zębate?
Where does one find the gears?
Jakiej firmy używa Pan wiertła ? : )
Tio, eres un artista!!!
Where can i buy it, i want exactly like this with the splitter and the chipper. I am living in Poland. Long live Poland :-)
Wow this is some high quality stuff m8. Keep it going.
Czy mógłbyś podać wymiary lejka?
AS ALWAYS VERY NICE WORK!!!!! KEEP UP THE GOOD WORK, YOU ARE AN INSPIRATION!!! GREETINGS FROM GREECE.
Sorry za zawracanie głowy. Nie mam doświadczenia w cięciu stali piłami z węglikami. Mógłbyś doradzić jakąś firmę/model? Z góry dziękuję. Subskrybuję.
if you ever feel like getting an upgrade get a magswich clamp
Awesome work, man! 😊
Legendary! Awesome idea, skill and video. You have got it all!
Jaki mocny silnik zastosowałes do tej maszyny?
Could I use the gear directly from the engine to the mechanism fi 60 - fi 400 ?
Świetny sprzęt. Gratulacje.
Great work dude, you are awesome in projecting that thing :)
Świetna robota, na światowym poziomie :)
To czym wiercisz w 3:56 to reduktor obrotów?
th-cam.com/video/CwQk1Pskj90/w-d-xo.html
12:30 - sorry for my personal question: but the firewood is it for your own consumption, or Is it for you to sell?
Przymierzam się do zakupu gotowego układu tnacego. Remet chodził mi właśnie po głowie. Dobra robota.
Increíble!!¡ very very good
Film świetny jak zwykle. Tylko osłony na paski zrobiłbym z blachy bez orworów i uchwyt na worek z grubszej blachy lub jakieś usztywnienie bo traci trochę kształt i nieładnie to wygląda.
Jaki moduł zęba mają koła zębate w rębaku?
DAMN, I'd LOVE to have these plans! 🙀
Палец в верх поляку! Молодец, хорошо сделал.
Мужык молодец радуй новыми изобретениями очень хороший пример
Witaj kolego, powiem ci szczerze że, twoje projekty są coraz bardziej skomplikowane, co mnie osobiście cieszy :D Mam jedno pytanie, jakiej spawarki mig używasz oraz czy warto ją kupić do majsterkowania? Pozdrawiam Mateusz
What blade were you using at 00.20
Jakiej tarczy używasz do cięcia stali?
A tak poza tym świetny kanał! Tak trzymaj 👍👍
Hey Darku . Jak zwykle świetna robota. A powiedz czy masz w planach wyrzeźbić mechaniczna łuparki do drewna? Pozdrawiam
I Love All your Creations! You are One of my Most Favorite channels to Watch! I Love watching your great Building skills in action! Before you made this channel did you build things like professionally? Or did you just learn as you go? INCREDIBLE work as Always! Take care Bro! And Thanks for all Your Hard Work Editing these Videos and making awesome Machines/Tools. Youre The Best!!!
Yes!! That is wgy I call this and other guys my universe teachers!! Believe me: You Tube is my university!
pedro tomé me too buddy! I learn so Much From Him and others like him. I am Also self taught lol
And so am I, man!!! So am I !!! And all this people are my teachers!! I spend hours 'n' hours and this is my adiction! But its a good healthy one! And I enjoy this a lot!!! Now I am searching on how to do a very different task: how to collect that powder from printer toner cassetes... I am selft taught and a multy task fellow too!!!
it's a shame youtube is blocking many artists from teaching :(
pedro tomé what do you do with the powder? Sounds very interesting! I think me and you are very similar! Lol i live in my Garage! Well not literally but as much time as i can spend creating or even watching videos on yt to learn lol
Gościu uzależniłem się od twoich filmów! Po za tym dobry pomysł na kolka do mojej Krajzegi ! Pozdro !
mersi pareni za tvoiu izobretenie.
love your work ! you make really cool stuff!
Very nice hand splitter machine
Jakiej mocy jest ten silnik?
Nice job, Darek!
I love your Chaneel 😍!
Super projekt 👌.
Miałbym pytanie jakiego migomatu używasz?
Kriss Woś
tell as the disk which you cut metal is called?
Nice work and what the size
I liked!😊
What was the device on your drill for tapping/threading holes, please?
Superb! soon 100k subs!!!!