Soldering XT60 connectors - tips and tricks

In this video I show how to properly replace the battery connectors to XT60. If you want to know what kind of tin to use or what soldering temperature to set, this video is for you.
---
Soldering station WEP 936:
botland.com.pl/stacje-lutowni...
Tin:
botland.com.pl/cyny-i-pasty-l...
Soldering tip:
botland.com.pl/groty-i-kolby-...
XT60 plugs:
botland.com.pl/przewody-i-zla...

[@JustifyJustin]

I know very little about soldering but could follow this. You should become a teacher.

[@carpballet]

This might be the best soldering video I’ve ever seen. Your speech pacing and pronunciation is very good. That you for the effort it took.

[@pandubek387]

Thanks a lot!

[@lp8650]

Thanks pandubek

[@nobodix]

Very excellent instructions and video. Thank you!

[@REDARROW-ez7dg]

Thank you for the reminder of correct polarity!

[@Magicmat]

Very helpful ! Thanks

[@martincoutts6747]

Great explanation. Thanks

[@choke666]

BIG THANKYOU!!

[@bikeradam]

Good info! Thanks!

[@reho4083]

Finally someone says solder and not sodder. thank you

[@tbremard]

Is there different xt60 females? There is no hole on the cable side : it is flat unlike the xt60 males from amass

[@bubel687]

dzięki
miałem zarabiać właśnie XT60 ale nie wiedziałem jak sie je zarabia

[@rorymax8233]

👏

[@andygermany1796]

I've found that sometimes TX60 female is also named as JY60

[@antoniodelvecchio5793]

Which mask do you use?

[@dannysimpson4419]

Can anyone help I have the XT60 SY60 connectors and I've blown them on my ebike my ebike powers on but that's it makes alittle noise but no power do I need to buy new sw900 controller thanks anyone

[@webspeed2704]

Is it possible to use xt60 for:
300w solar panel cable wire to (xt60) ---> solar charge controller?

[@pandubek387]

AFAIK the max current output of the 300W solar panel is less than 25 Amps so the XT60 should be enough. If you want something more durable I suggest to use XT90, but please remember that neither of them are waterproof.

[@rclewis01]

@@pandubek387 true, but you can pack with grease first, before plugging them in.

[@MalinowyWampir]

Dlaczego różne website określają różnie polarity tego konektora? Przeważnie zaokrąglony jest positive. Gdzie tu jakieś normy? Komu wierzyć. Mam kilka urządzeń, które również maja plus na zaokrąglonym pinie.

[@PaffcioStudio]

Czyli jak rozumiem, to grot z opisu pod filmikiem będzie pasował do Wep 936? W opisie tego grotu nie wspominali o niej i wolę się upewnić. Akurat mam tę lutownice więc, uff.

[@pandubek387]

Tak, powinien pasować.

[@PaffcioStudio]

@@pandubek387 dzięki wielkie :)

[@thischannelisretired123]

what mm size solder wire do you recommend?

[@pandubek387]

I usually use 1mm^2 tin.

[@professionalmoron5345]

420 subs btw

[@enderkittygaming2348]

I will need to ignore that plus and minus as my project was wired in reverse.

[@grendelkeep]

At 1:45 you mixed up female and male part. The female is the one on the left, not on the right.

[@erwinkuijs1190]

The mask isn't that necessary if you use solder without lead in it, which is illegal in most countries by now anyway and not available in most places

[@AutodidactEngineer]

You can still get it, in EU Cynel is a great brand which is based in Poland!