Im glad you posted this video - I just installed all the same Chasebays stuff in my e36, but my package did not come with any of the instruction cards... I did not know you needed to have free play on the pedal assembly... Wish they would have instructed that!! Thanks Alberto
If you keep the stock brakes, change the rubberbushings on the caliper to brass ones. and do brass bushings for clutch and brakepedal if you haven’t done that yet. will change the pedalfelling extremly and the brakepads will wear out more even 😉
You will need to shorten the push rod by about a 1/4 inch or else your brakes will drag the pedal will not fully disengage I have had to do it on 2 e36 builds one 92 one 98
@@ALBERTOBIGBOOST We used to delete brake boosters due to the brakes being engaged when we were already back on throttle when I first found it to still have the pads engaged i was powering out of a hard right bend and I ended up spinning 3 times but to my luck i stopped facing the right way to downshift to 3rd and still finish 6 seconds they told me the spin cost me in time that night the booster was gone.
Just looking for peoples opinions? Is brake booster delete + abs delete too much for a street car? It's for a Jzx100 chaser that will get the odd track use but will be my weekend street car. Will this compliment bigger brakes nicely or too extreme for the street? Thanks! Mark
You may never see this, but your vids for installing and building stuff is my ASMR
your videos really help inspire me to continue making my own videos. good stuff big boost!
Been thinking of going with no abs finally an install I could see clearly.🔥🔥🔥🔥 great content 👍
Im glad you posted this video - I just installed all the same Chasebays stuff in my e36, but my package did not come with any of the instruction cards... I did not know you needed to have free play on the pedal assembly... Wish they would have instructed that!! Thanks Alberto
If you keep the stock brakes, change the rubberbushings on the caliper to brass ones. and do brass bushings for clutch and brakepedal if you haven’t done that yet. will change the pedalfelling extremly and the brakepads will wear out more even 😉
You will need to shorten the push rod by about a 1/4 inch or else your brakes will drag the pedal will not fully disengage I have had to do it on 2 e36 builds one 92 one 98
Good to see the beautiful Sharon in your videos
💜
El duro papi!!!💪💪💪mecanica boricua siempre alante!!
I was already going to buy this setup and now that 2j papi made a video on it it’s a must
Que emocionante será el día que lo termines! 😍
Are you telling me the big BOOST car isn't gonna have BOOSTED brakes? haha
I guess so 🤷🏻♂️🤣
@@ALBERTOBIGBOOST We used to delete brake boosters due to the brakes being engaged when we were already back on throttle when I first found it to still have the pads engaged i was powering out of a hard right bend and I ended up spinning 3 times but to my luck i stopped facing the right way to downshift to 3rd and still finish 6 seconds they told me the spin cost me in time that night the booster was gone.
@@ALBERTOBIGBOOST But how well does the car stop ? with the Booster delete. Is this mater cylinder all you need. Hows it compare
Love your videos keep up the good work
Love the video again. Love seeing Guess and Sharon too 😍😍
Love the channel bro and the not so dirty 36 Got a 328ic myself and learned a lot from you thanks
He is the bob Ross of car building
2JZ the World
I love your videos Alberto.. Please post more often...
Bud, this is an excellent video. Greasy job
Just looking for peoples opinions?
Is brake booster delete + abs delete too much for a street car?
It's for a Jzx100 chaser that will get the odd track use but will be my weekend street car.
Will this compliment bigger brakes nicely or too extreme for the street?
Thanks! Mark
where did you get the hangable led light mat 4:47 ?!
I know this video is a little dated. But how do you like the braking feel and effort without the booster?
Great video 👌🏼
Hey Alberto!! So what happened to the rx7??
19:16 the metal spring is wrong. The tips are inside of the bracket.
Any issues with brake booster?
Awesomeness
What bodykit you've got on your E36 Mr BigBoost?
More videos 🥰
Good man!!!...
8:58 deez nutz
🤣
8.09 she wasn't ready...
“DEEZ NUTS”
Early gang!
No those bearings are bad! The more it spins the less grease the bearing has
i like peesha too
Did something bad happen to the rx7 build??
Put on the back burner till his main drift car is back up.
Lack of time only!
Working on getting the e36 back on the track. Then I can focus on doing the rx7 right. It’s going to be a very extensive build
Change the colour of the car Alberto. Is time for something sick aero!
Pretty sure he’s been working on getting the wrap off but it’s so old that it’s sticky and not coming up very well
@@nickgriffin4284 yeahh i know. I can't wait to see this built complete!
Those brake lubes that aren’t clear suck
👍🏼👍🏼👍🏼👍🏼👍🏼
Not enough teek’s
13:49 some whaaaat???
hahahaha picha it´s dick in portuguese, nice to see someone who laugh about it.
@@AlexAzul73 Funnily enough, in Slovak it's pussy. Complementary isn't it?
I thought you took of the wrap?
Is been hard to take it out still in the process
Peesha 🍕
Sharon! Portate bien!
first