TOP 22 AWESOME DIY CAR IDEAS • TOP 22 AWESOME DIY CAR... BEST DIY • TOP 12 AWESOME BRILLIA... Know More Subscribe here: / gitihacker More to watch here / @diy-87for
used these motors before . the bracket will bend out of enlinement. the sprocket is to big, to high geared, motor not big enough,battery to small. how do i know i have tried similiar. it will give a limited assist while pedalling for approx 10 min, check motor amp against battery
I wonder what a good car starter and powerful car battery would do? Aren't they made to have high torque or something? Or spin at high rpm with a good amount of torque?
You should have used the cheap charger that comes with those Ryobi's. You could have gutted out the charge circuitry, just leaving the contact points.....mount that to the bike, and you have a battery mount and an easy system to quick swap the batteries :)
was it because of the size of sprocket and torque you linked it directly to the back small sprocket? another thing, most if not all bike conversions ive seen never use the derailleur back gear is there a reason for that? cheers looks cool, i want to have a go at a scooter
Windshield wiper motors have been used for many applications. Usually when a reverse motor rotation is also needed. 12VDC motors can be reversed by switching polarity. I am sure I would not want to drive the pedals on any electric bike .
I got a Chinese e-moped a few years ago, it has a 1500w, 48v hub motor, and is powered by five 24ah 12v batteries providing 60v. It will do 35mph on the flat, & will maintain 28-30mph going up hills. I don't like it, because 1. in the UK it has to be tested for roadworthiness annually & insured, 2. I hate wearing a helmet. 3. it has tiny wheels, so handles badly & is all over the place when it hits potholes, and 4. I suffer range anxiety using it, & it doesn't have pedals, so when the power runs out you`re pushing an unwieldy moped all the way home! Because of these issues, I`ve barely used the thing.. So, I`ve been looking for alternatives, including converting pushbikes, as I have a couple sitting around doing nothing, and having pedals means that it could help my fitness levels, & could easily get home if the batteries ran out.. I also have lots of car parts in my garages, loads of motors of different types, so the idea of maybe using some in a project like this, does appeal to me! You have to experiment to find the best solution, and by this guy experimenting, trying different variations, it means we don't have to, so thanks for that! The wiper motor wasn't bad, maybe one (or even two) wiper motors on each wheel? 2x 18v 5ah batteries on each? or if you used 24v ones from a truck, powered by 2x 24v 6ah batteries, and if it worked, build some higher amp & volt battery packs? Just thinking out loud..
If you were to chop off a bit of the frame around the rear tires, perhaps you could replace the tiny wheels with something with a larger diameter. I believe this, in turn, would give you a bit more speed also making it run a bit longer.
При таком раскладе надо ставить цепь на переднюю звезду(педаль) и через обгонную муфту. Иначе когда едешь педали всё крутяться. Вот вот и копыта всё время в раскоряку.
This is not genius. This is stupid shit and I am not jealous at some piece of crap I can make in 4 hours a lot better by canceling the pedals, while the electric motor is engaged.
anthony thomas , you’re a damn idiot if you think some of us are jealous of such shit ideas. None of the bikes had the power to climb a damn handicap curb. I wouldn’t even begin to use such trash to make an e-bike. What he was doing was as lame as getting in the junk drawer and grabbing a few AA batteries , tearing down the ceiling fan, stripping it’s weak motor and duct taping that shit to a bicycle frame and expecting it to be road worthy. What the hell? Most people can just LOOK at items and do the common sense physics. I guess you and this dude should pal around and hang out on the short bus. ....jealous.......😂😂😂😂smdh
The end result looks like you welded the motor mount in and lengthened the wires cause initially it looked like they would pull loose if you made a right turn.. All you had to do was flip the battery around.. If you did this on the front unused sprocket, might have been more better in speed, etc.. And I personally would have went with a smaller sprocket on the motor cause workload kills the overall speed of the output, you get more top end yes, under no load conditions but this is where you have to pay some price.. and why I would have went to the front sprocket by pedals.. or added another to the pedals but that would have taken a little more crafting and modifications
On some of these bike projects, it might be better to add the motor to the front wheel. That way the pedals and sprockets in the back can be left alone and will be useable if needed.
I use industrial push buttons positioned behind secondary positioned brake levers. Not on the grip shift rendering it useless. Still wondering the motor rating on this one.
Нихуа- хуа аккамуляторная ленточная пила по металлу ,сабельная пила аккумуляторная ,аккумуляторная болгарка ))))) Круто!!!!! С таким инструментом много чего можно замутить
Chris Davis 😂😂😂😂 I was thinking the same shit. Felt like I was watching old cartoon episodes. I was waiting for the pedals to whack the hell out of his shins and feet. But shit, ....they were all to weak to even make a full cycle around. Wait til those hunk of shits come to a handicap ramp, he better take a back back full of those 20 volt drill batteries. This dude wouldn’t even get a participation ribbon in an Elementary School Science and Inventor’s Fair. Not even with the group that comes in on the short bus.
Bonjour, vous êtes vraiment un bon bricoleur, svp le moteur que vous avez utilisé dans la troisième partie (moteur d'essuie glace) est ce qu'il est vraiment puissant au point qu'il peut te déplacer ton poids et le poids du vélo.
Buenas noches no domino el idioma ingles pero lo felicito por lo practico y sencillo del videotalvez usted puede decirme como se llaman las partes que utilizo esta bien practico. Saludos buenas noches.
My thoughts are why use the peddles at all ? I mean why add a motor that's just in the way , why not mount it where the peddles are and use the rear derailer as intended, put some foot pegs somewhere else . Just seems to make more sense to me .
Take The Rear Wheel from A Donor Bike & Put it up Front.. Connect The Motor to The Front Wheel.. You Will get More Speed and Power with The Motors and Batteries You're Using... Pulling uses Less Force Than Pushing... And Your Pedals Won't Spin by Using The Original Sprocket Assembly... Or You could Steal A Large Sprocket and Mount it to The Left Side of The Rear Wheel and reverse The Polarity of The Battery Input.. And The Pedals Wont Spin. Pretty Cool Video Though... Very Creative.. On A Budget..lol.
Lo mataron al vato por sacar tan brillante idea el motor de e de ser desde los doce voltios o hasta 36 voltios si se fija le hace falta fuerza con carga con el marrano arriba sufre mucho el motor y sin el marrano arremanga en motor
Put the charging unit from the drill back in the circuit and as you pedal the motor without power to it it will produce electricity to charge the battery and it's not a full power electric bike it's a power assist for climbing hills .
The three wheel guy sure wasted sheet metal making the floor ... Also buggered up the front wheel geometry ... Would have done plugs instead of splices ... He has the kit ...
![บุษบา - เมนทอล [Official MV]](http://i.ytimg.com/vi/IGnWPokSEis/mqdefault.jpg)
I did not realize I had parts at home based on the second version for a 24 volt dual motor drive. Thanks for the inspiration!
You could use a dimmer switch like what is used to dim the lights in your house or adjust the speed of a ceiling fan. As a throttle.
TRAGICAL performance and even more TRAGIC operation
used these motors before . the bracket will bend out of enlinement. the sprocket is to big, to high geared, motor not big enough,battery to small. how do i know i have tried similiar. it will give a limited assist while pedalling for approx 10 min, check motor amp against battery
I like the ideas you have. I like to experiment too. Some things don't always work great but it's fun to learn what will.
Good ideas that need improvement, thank you for video.
My favorite part is how they all seem to love leaving short cable ties where they will tear up your hand or leg. Have you ridden bikes much?
I wonder what a good car starter and powerful car battery would do? Aren't they made to have high torque or something? Or spin at high rpm with a good amount of torque?
You should have used the cheap charger that comes with those Ryobi's. You could have gutted out the charge circuitry, just leaving the contact points.....mount that to the bike, and you have a battery mount and an easy system to quick swap the batteries :)
Great video, like!
Mr. Genius,
Could you advise any of them to cycling?
If the back tire is airpumped a bit more, you be better speed with less force!.
The outcome of the instalation,good fast job.
was it because of the size of sprocket and torque you linked it directly to the back small sprocket?
another thing, most if not all bike conversions ive seen never use the derailleur back gear is there a reason for that?
cheers looks cool, i want to have a go at a scooter
connect the motor chain to the wheel not the freewheel
and you can use the motor without taking your feet off the pedals
Windshield wiper motors have been used for many applications.
Usually when a reverse motor rotation is also needed.
12VDC motors can be reversed by switching polarity.
I am sure I would not want to drive the pedals on any electric bike .
5:56 he welded the motor in place, also the motor will constantly spin the pedals way to fast, making it pretty dangerous.
I did a bmx freewheel on mine so the cranks can overrun the motor
nice 👍🏼👍🏼👍🏼
¡¡¡QUE BUENO ERES INSTALANDOLE EL MOTOR , ¿ME PUEDES DECIR QUE POTENCIA TIENE ??, SIGUE ASI AMIGO Y ENHORABUENA ,, UN SALUDO DE CARLOS EL HISPANO ....
I got a Chinese e-moped a few years ago, it has a 1500w, 48v hub motor, and is powered by five 24ah 12v batteries providing 60v. It will do 35mph on the flat, & will maintain 28-30mph going up hills. I don't like it, because 1. in the UK it has to be tested for roadworthiness annually & insured, 2. I hate wearing a helmet. 3. it has tiny wheels, so handles badly & is all over the place when it hits potholes, and 4. I suffer range anxiety using it, & it doesn't have pedals, so when the power runs out you`re pushing an unwieldy moped all the way home! Because of these issues, I`ve barely used the thing..
So, I`ve been looking for alternatives, including converting pushbikes, as I have a couple sitting around doing nothing, and having pedals means that it could help my fitness levels, & could easily get home if the batteries ran out..
I also have lots of car parts in my garages, loads of motors of different types, so the idea of maybe using some in a project like this, does appeal to me!
You have to experiment to find the best solution, and by this guy experimenting, trying different variations, it means we don't have to, so thanks for that!
The wiper motor wasn't bad, maybe one (or even two) wiper motors on each wheel? 2x 18v 5ah batteries on each? or if you used 24v ones from a truck, powered by 2x 24v 6ah batteries, and if it worked, build some higher amp & volt battery packs?
Just thinking out loud..
if you have no use for the e-moped id like to have it,reply here if that's possible, thanks.
Chapista muy bueno tú videos amigos saludo
thanks
If you were to chop off a bit of the frame around the rear tires, perhaps you could replace the tiny wheels with something with a larger diameter. I believe this, in turn, would give you a bit more speed also making it run a bit longer.
more speed? supersonic? bicycle cranks run at about 80 rpm that motor runs at about 1200 rpm I think. 15 times faster than normal peddling.
Any information how long it get from single charge battery?
При таком раскладе надо ставить цепь на переднюю звезду(педаль) и через обгонную муфту. Иначе когда едешь педали всё крутяться. Вот вот и копыта всё время в раскоряку.
amazing man....bravo.... 👍
SOME PEOPLE ARE SO JEALOUS THEY POST SPITEFUL REMARKS BECAUSE THEY CAN'T THINK LOVED IT ALL . THANKS TONY T . CHIPPY.
This is not genius. This is stupid shit and I am not jealous at some piece of crap I can make in 4 hours a lot better by canceling the pedals, while the electric motor is engaged.
anthony thomas , you’re a damn idiot if you think some of us are jealous of such shit ideas. None of the bikes had the power to climb a damn handicap curb. I wouldn’t even begin to use such trash to make an e-bike. What he was doing was as lame as getting in the junk drawer and grabbing a few AA batteries , tearing down the ceiling fan, stripping it’s weak motor and duct taping that shit to a bicycle frame and expecting it to be road worthy. What the hell? Most people can just LOOK at items and do the common sense physics. I guess you and this dude should pal around and hang out on the short bus. ....jealous.......😂😂😂😂smdh
The end result looks like you welded the motor mount in and lengthened the wires cause initially it looked like they would pull loose if you made a right turn.. All you had to do was flip the battery around.. If you did this on the front unused sprocket, might have been more better in speed, etc.. And I personally would have went with a smaller sprocket on the motor cause workload kills the overall speed of the output, you get more top end yes, under no load conditions but this is where you have to pay some price.. and why I would have went to the front sprocket by pedals.. or added another to the pedals but that would have taken a little more crafting and modifications
On some of these bike projects, it might be better to add the motor to the front wheel. That way the pedals and sprockets in the back can be left alone and will be useable if needed.
Mint
me gusto el video tendria que buscar la forma que los pedales no giren a la misma ves
Sigue adelante. Si la mente te.dice loco. No hagas caso auque así sea
Nice work
I use industrial push buttons positioned behind secondary positioned brake levers. Not on the grip shift rendering it useless. Still wondering the motor rating on this one.
Вместо переднего колёса ставишь ещё одно заднее и на него ставишь мотор со стеклоочистителя.так езжу ужэ два года
Cool video 👌
Только как он полчаса беспрерывнойработы выдержит?
Están interesantes las ideas.
I think you´re breaking record of .1 MPH LoL . . wow that handicap bike is slower than a dope turtle
Последний вообще класс, села батарея- снимай цепь, педали крутиться не будут из-за червячной передачи.
Sir plsss write down the name of all materials, sothat we can easily to follow the step.
a million thanks for simplifying it and making it cost effective
How far it that puny drill-driver battery going to propel the bike?
lento pero seguro .
el segundo invento esta mejor.
me gusta........,,,👍
Só gambiarra...
Ficou ótimo ! mas como é que vai apoiar os pés se o pedal vai girar quando o motor estiver ligado?
Anoar lopes siga siga no pare!
21:47-Tackle box for fishing for electric eels.
Нихуа- хуа аккамуляторная ленточная пила по металлу ,сабельная пила аккумуляторная ,аккумуляторная болгарка )))))
Круто!!!!! С таким инструментом много чего можно замутить
Very good
Ok so does riding this beat your feet....where is the disconnection to the pedal
Chris Davis 😂😂😂😂 I was thinking the same shit. Felt like I was watching old cartoon episodes. I was waiting for the pedals to whack the hell out of his shins and feet. But shit, ....they were all to weak to even make a full cycle around. Wait til those hunk of shits come to a handicap ramp, he better take a back back full of those 20 volt drill batteries. This dude wouldn’t even get a participation ribbon in an Elementary School Science and Inventor’s Fair. Not even with the group that comes in on the short bus.
Der Motor kocht dir weg wenn du zu langsam bist ,falsche übersetzung !
what type of motor do you used 0:45
Compa pero no explicas nada estan chidos tus inventos pero no supe de donde son esos motorcitos que usas
that 10-speed fork assembly isn't strong the way it was welded. guarantee that doesn't last.
Я-бы батареку "крона" поставил)
Hi mate I do a lot of stuff like you do I wish you were my neighbour I live in Australia keep it up mate.Cheers from Aussie man
Alwa did like Aussis.Wish U were my neighbor
Ahhh guys I wish I was your neighbor! Love to do all that stuff but with a buddy, otherwise it gets sad quickly!
Roue libre sur pignon d'entraînement ...
Хорошая работа! Палец вверх 👍!
What is the music that is playing when the angle grinder is on
Whhaaat?
thought of everything except power!?
Bonjour, vous êtes vraiment un bon bricoleur, svp le moteur que vous avez utilisé dans la troisième partie (moteur d'essuie glace) est ce qu'il est vraiment puissant au point qu'il peut te déplacer ton poids et le poids du vélo.
Should weld it straight to the wheel
Nice vid, pls what motor model is this?
Drilling frame ?!
How many watts of motor
Вот только и способно просто колесо крутить в воздухе
Obidel invalida , i isportil velik , sozdal ???
a tailgate power window motor would be better, stronger and smaller.
Buenas noches no domino el idioma ingles pero lo felicito por lo practico y sencillo del videotalvez usted puede decirme como se llaman las partes que utilizo esta bien practico.
Saludos buenas noches.
Where is this buymotor
4 DIY ideas where zero fucks was given
I don't know if you're making ground or losing ground
FuSIoN Density Well he’s definitely not losing any weight😂
My thoughts are why use the peddles at all ? I mean why add a motor that's just in the way , why not mount it where the peddles are and use the rear derailer as intended, put some foot pegs somewhere else . Just seems to make more sense to me .
Well that’s 37:50 of my life I wish I could get back.Why make JUNK and think some one would want to watch it!!
The ideas are good. But the motors aren’t strong and obiously the performance is very very poor
te falto pone algo que evitara mover los pedales
1200 rpm electic motor should get you close to 200 mph. Good luck.
Cómo se puede conseguir el motor
Çok güzel
Putting the motor on the front wheel would make more sense. Harder to do but would work much better.
Take The Rear Wheel from A Donor Bike & Put it up Front.. Connect The Motor to The Front Wheel.. You Will get More Speed and Power with The Motors and Batteries You're Using... Pulling uses Less Force Than Pushing... And Your Pedals Won't Spin by Using The Original Sprocket Assembly... Or You could Steal A Large Sprocket and Mount it to The Left Side of The Rear Wheel and reverse The Polarity of The Battery Input.. And The Pedals Wont Spin. Pretty Cool Video Though... Very Creative.. On A Budget..lol.
Kanongrymt haha.
Amigo te faltó el tache que va en la corona
The gear ratio needs to be higher, so that you get more torque on the wheel
You are ghaint misteri
👍
You could put Tesla out of business lol :)))
Buenísima idea. Cuáles son las especificaciones del motor para la bici eléctrica?
Lo mataron al vato por sacar tan brillante idea el motor de e de ser desde los doce voltios o hasta 36 voltios si se fija le hace falta fuerza con carga con el marrano arriba sufre mucho el motor y sin el marrano arremanga en motor
This is show ideas only to look for happiness not for doing
Put the charging unit from the drill back in the circuit and as you pedal the motor without power to it it will produce electricity to charge the battery and it's not a full power electric bike it's a power assist for climbing hills .
Собрание рукожопости, и это при том, что есть все нормальные инструменты! ППЦ!
Looks like he's better painting!
Coitado do cadeirante, ficou sem cadeira kkkkk.
I feel sad for the bikes...
Hahaha
What is it with these guys and flip flops?
Careful their big fella. You get hurt going that fast.
Haha this is awesome. I hope you enjoyed making these!
The three wheel guy sure wasted sheet metal making the floor ... Also buggered up the front wheel geometry ... Would have done plugs instead of splices ... He has the kit ...
Heavily underpowered
a la de silla de rueda la llanta delantera seria mejor una ring 20
Disabled the pedal
You're idea works but I could walk faster than that...
Prezzo del kit .conpleto al netto grazie"
Черный вел это зарядка для аккумов
Unable to see connection with close-up