I would love to buy one of these someday! Truly works of art and precision. Thanks for your excellent shooting and showing us what they can really do in the right shooters hands!
I’m also going to start professionally toning these guns especially Barrel work. I have never seen anybody that has the knowledge I have to take these barrels to the accuracy that I can achieve. I’m giving away all the secrets but for the people who don’t want to do it themselves I’m going to do it for them
Thank you John….since 2016 Huben always my top two gun. K1 is Compact, powerful and very accurate. Now I’m not sure what more accurate for long range shooting Huben or FX Impact. Both shooting outstanding.
Them slugs are version 2 mp. What is the twist rate on them tj barrels, I use version 3 mp slugs, the a super accurate, But my tj barrel only has 6 lands, and a 1 in 16 twist, You should try the v 3 slugs. A faster twist rate is better for slugs like a 1 in 10.
Thank you for a most instructional video. I have always enjoyed your work. Question: Would the use of WD40 affect the O-rings adversely? I have always used Ballistol when cleaning my barrels in any airgun I have. The TJ barrel might be impervious to the petroleum distillates, but will the O-rings suffer any ill effects over time. Thank you for your detail in your work.
Awesome shooting my friend you make look easy with the huben I've never shot one before maybe some I'll get to own one thanks for sharing bsafe buddy 👍
@@AirSniper-SongV alice tx lol but I'm having problems with my fx impact mk2 25 cal 700mm shooting slugs it was Dial in shooting 34 gr vk at 995 to to 1000fps very accurate then I tried tuning it down to shoot pellets but I ran out of pellets and now I'm shooting slugs again I can't get it to settle in I'm just like scratching my head like wtf bro but ill get it takes time and alot of slugs
@@chrisfigueroa3361 🤔??? My friend and I shooting 34grs about the same speed with very good accuracy 150+ yards. I know my M3 with superior heavy liner, I clean my barrel after two magazine. Clean your barrel very good and make sure you don’t over tight your barrel jam-nut. Did you make any adjustment on your pin probe to shoot with pellets? If so you need to back the pin probe back sine 34 grs slugs have flat base.
@@AirSniper-SongV yeah my m3 22 is shooting perfectly the 34 gr varmint knockers at 1000fps av but my fx impact mk2 25 cal 700mm is the one that is a little off man I can't figure it out it did have a carbon fiber sleeve but I took it off I had to cut it off because it was bonded with JB weld lol and I went back to orings the accuracy is there but my fps is all over the place the first 3 shoots are low then it starts shooting good probably reg creep I don't know 😕
Excellent video! I was looking forward to you posting the video with the new Barrel. I am more interested in more shot count with a longer Barrel. So I am able to shoot more with the same amount of power well keeping the Factory look. Do you know if Kelly is making any type of upgrade for 30 caliber magazine and Barrel?
Thanks Mgtow, I tested this barrel between 930 and up to 1080 fps. 930 to 1000 fps guns shoots with excellent results. If you fills your gun up to 4500 psi you can get two magazines with this barrel and tune. Gun can shoot as low as 14 mpa reg setting. But I like little higher reg setting, because if I wanted to shoot faster speeds I just turn up the power wheel and don’t have to mess around with regulator. Shots the gun at 200 yards with the speeds around 990-1000 fps and it shoot awesome just only two clicks up on the power wheel. I’m not sure if Kelly going to make .30cal.
Out of all the barrels you’ve tried, factory, lw and these what was the most accurate with slugs. I have a 25 on the way and trying to determine if it’s worth swapping barrels from the factory one ?
What is better for the k1 in .22, the tj custom barrel or the lw hammer forged, to be honest i didnt realise kelly did different barrels for the k1, i watchwd your other vid on the lw hf barrel and that looked awesome. What say you ?
LW is a .25cal and TJ is for .22cal. TJ shoots cast ammo from MP Mold very good, but not so good with the pellets. LW shoot both pellets and slugs very good. For the slugs I’m shooting NSA 38 grs (.254) around 960 fps.
Nice Gun nice shooting. You should’ve sent me your factory barrel instead of wasting your money on the TJ barrel. I’ll shoot a 200 yard group for you with a factory barrel with a chill cut off and lapped and polished .It’s going to really embarrassed at TJ Barrel I don’t know why you would choose a hammer forged $300 Barrel and then spend the money to have it fit it to the Gun.
Got my TJ barrel on my huben with the custom mag, I found it don't like pellets very much, would you say it more for slugs, as slugs seem to be very good.
It’s a slugs barrel. It very like MP slugs. You have to buy the mold and cast the slugs yourself. You’ll be very pleased how well the slugs shoot with this TJ barrel.
I would love to buy one of these someday! Truly works of art and precision. Thanks for your excellent shooting and showing us what they can really do in the right shooters hands!
Nice and accurate, I'm thinking of getting one myself, I've watched many videos and I mostly see very positive feed back
I’m also going to start professionally toning these guns especially Barrel work. I have never seen anybody that has the knowledge I have to take these barrels to the accuracy that I can achieve. I’m giving away all the secrets but for the people who don’t want to do it themselves I’m going to do it for them
Huben is my all time favorite glad to see you taking as far as you have!!!
Thank you John….since 2016 Huben always my top two gun. K1 is Compact, powerful and very accurate. Now I’m not sure what more accurate for long range shooting Huben or FX Impact. Both shooting outstanding.
I can’t wait for that .177!! Great video brother
Thanks Blake!! One day I’m going to head up there and do some Varmint shooting with you.
nice job
did you think about fitting an fx 700 mm liner in huben
heavy liner with 1-16 TR ?
Them slugs are version 2 mp.
What is the twist rate on them tj barrels,
I use version 3 mp slugs, the a super accurate,
But my tj barrel only has 6 lands, and a 1 in 16 twist,
You should try the v 3 slugs.
A faster twist rate is better for slugs like a 1 in 10.
Thank you for a most instructional video. I have always enjoyed your work. Question: Would the use of WD40 affect the O-rings adversely? I have always used Ballistol when cleaning my barrels in any airgun I have. The TJ barrel might be impervious to the petroleum distillates, but will the O-rings suffer any ill effects over time. Thank you for your detail in your work.
There are no o rings in the barrel, so it should be fine,
Awesome shooting my friend you make look easy with the huben I've never shot one before maybe some I'll get to own one thanks for sharing bsafe buddy 👍
Thanks Chris,
Man, I wish you can shooting my K1. Not sure where you live, I’m in SoCal ( California ).
@@AirSniper-SongV alice tx lol but I'm having problems with my fx impact mk2 25 cal 700mm shooting slugs it was Dial in shooting 34 gr vk at 995 to to 1000fps very accurate then I tried tuning it down to shoot pellets but I ran out of pellets and now I'm shooting slugs again I can't get it to settle in I'm just like scratching my head like wtf bro but ill get it takes time and alot of slugs
@@chrisfigueroa3361
🤔??? My friend and I shooting 34grs about the same speed with very good accuracy 150+ yards. I know my M3 with superior heavy liner, I clean my barrel after two magazine. Clean your barrel very good and make sure you don’t over tight your barrel jam-nut.
Did you make any adjustment on your pin probe to shoot with pellets? If so you need to back the pin probe back sine 34 grs slugs have flat base.
@@AirSniper-SongV yeah my m3 22 is shooting perfectly the 34 gr varmint knockers at 1000fps av but my fx impact mk2 25 cal 700mm is the one that is a little off man I can't figure it out it did have a carbon fiber sleeve but I took it off I had to cut it off because it was bonded with JB weld lol and I went back to orings the accuracy is there but my fps is all over the place the first 3 shoots are low then it starts shooting good probably reg creep I don't know 😕
Both guns have heavy superior liner the 22 cal and 25 cal I think I just need to fine tune it take my time and let it settle in
That's some good shooting , you make that look easy .
Looks to be hitting dead center on that spinner target .
Thanks Dale!! A lot have to do with your advised on how to cast perfect slugs.
Excellent video! I was looking forward to you posting the video with the new Barrel. I am more interested in more shot count with a longer Barrel. So I am able to shoot more with the same amount of power well keeping the Factory look. Do you know if Kelly is making any type of upgrade for 30 caliber magazine and Barrel?
Thanks Mgtow,
I tested this barrel between 930 and up to 1080 fps. 930 to 1000 fps guns shoots with excellent results. If you fills your gun up to 4500 psi you can get two magazines with this barrel and tune. Gun can shoot as low as 14 mpa reg setting. But I like little higher reg setting, because if I wanted to shoot faster speeds I just turn up the power wheel and don’t have to mess around with regulator. Shots the gun at 200 yards with the speeds around 990-1000 fps and it shoot awesome just only two clicks up on the power wheel.
I’m not sure if Kelly going to make .30cal.
Those Hubens are awsome guns. What kind of scope came do you have?
I use Arken Scope here is the link: www.arkenopticsusa.com/sh4g2-6-24x50mm-ffp-vpr
Out of all the barrels you’ve tried, factory, lw and these what was the most accurate with slugs. I have a 25 on the way and trying to determine if it’s worth swapping barrels from the factory one ?
Definitely LW barrel in .25cal most accurate.
Excellent!!!
Thank you sir!!
I have the same casted mp slugs but .224 what sizer are you using ( what brand or model) thanks
@@aventura365.
I use MP Mold Sizer .223.
What is the name of that mold as I can only see boat tail molds on the mo mold website.
Thanks.
Here is the link to the mold.
www.mp-molds.com/product/22-air-rifle-mold-8cav-mold/
@@AirSniper-SongV my luck they are out of stock
Hey brother can I use a brush like that for my taipan it has a LW barrel
What is better for the k1 in .22, the tj custom barrel or the lw hammer forged, to be honest i didnt realise kelly did different barrels for the k1, i watchwd your other vid on the lw hf barrel and that looked awesome.
What say you ?
LW is a .25cal and TJ is for .22cal. TJ shoots cast ammo from MP Mold very good, but not so good with the pellets. LW shoot both pellets and slugs very good. For the slugs I’m shooting NSA 38 grs (.254) around 960 fps.
Hi the LW 2018 Huben .22 barrel will shoot the cast slug from Mp mold version 1
Hello what barrel You used?
@@gagain100
TJ Barrel 1:16 twist.
Can the huben k1 rifle reach 1000fps with 40 grain slugs in 22 caliber?
It can be, however 40 grs slug won’t fit inside the magazine
What speed on the rifles is there and the bullet how many grams
I believe you canhearhim say 950fps 36gr slug
كم يبلغ ثمن هذهِ البندقية بالدولار الأمريكي ؟
About $1800
Nice Gun nice shooting. You should’ve sent me your factory barrel instead of wasting your money on the TJ barrel. I’ll shoot a 200 yard group for you with a factory barrel with a chill cut off and lapped and polished .It’s going to really embarrassed at TJ Barrel I don’t know why you would choose a hammer forged $300 Barrel and then spend the money to have it fit it to the Gun.
Got my TJ barrel on my huben with the custom mag,
I found it don't like pellets very much, would you say it more for slugs, as slugs seem to be very good.
It’s a slugs barrel. It very like MP slugs. You have to buy the mold and cast the slugs yourself. You’ll be very pleased how well the slugs shoot with this TJ barrel.
Where can I get tj barrel?
krazcool.com/
I don’t think he listed TJ barrel on his website, just email him and ask for custom TJ barrel.
Класс 👍
Where did you get the barrel
Got my barrel from
krazcool.com/ or you can contact him at
Krazcool@att.net
+1 (816) 800-1926