I laughed so hard when Brent said "careful" and then you let the pedal go and the car didn't move at all. ahahahah what a good video! Whoever wins is gonna have a awesome car!
That quick “careful” then wide open eyes and smile that came on Brents face when Kyle dumped the clutch and the axle broke had me dying😂, that IRS life sucks sometimes especially when you throw double the HP at it
Love seeing Jamie, he was the person who inspired me to get all new teeth. 🙌 it’s been a journey but looks like we both have the ability to smile at the world now 🫡
@@MyWolffy I feel you brother I had to wait years myself and I had a genetic condition I was gonna lose em all one day. So every time I had a extra $5-10 etc I’d throw it in a jar. Any sec I felt I was up I just threw a little in the jar( trust me I am poor). When I saw Jamie’s done it really pushed me how people were positive towards him. Finally I was able To have insurance offset a little bit of the cost and I managed to have about $5000 of my own saved 😀. I don’t have the implants but trust me anything is better than living in pain. Hope you get there brother 🙌
i got metal wire braces as an adult (at 21 years old) like kyle and it completely changed the structure of my face. my jawline is so much better looking now. it gave me a ton of confidence as well as eating better and lifting weights 3x a week i am a completely different person now. if i can do it, so can you... don't give up. we're all gonna make it.
I was chasing my tail on a random issue (timing not boost) and when I found that my O2 extender was rubbing and causing ghost knock it was like winning the lottery lmao.. chased my tail for a year + on that one 😅
S2000 axles are expensive, if the shaft is intact you can rebuild it by replacing the cups, they're the same on passenger or driver side axles. You can buy a passenger side axle and harvest the inboard and outboard joints to return it to stock. The factory axles are thick, it's not the shaft that breaks it's the cv joints that split. Be careful with remanned or Ebay axles. You're better off rebuilding them yourself with used OEM components that buying a remanned one.
DEFINITELY PUT THE BIG PULLEY BACK IN. You'd need to upgrade a lot more stuff for that kind of power. Also, it's going to be making more boost at lower altitude. That way, you can put more timing back in. It takes HP to spin the supercharger, the more boost the more HP going to spinning it. The big pulley would be less stress on the supercharger, less stress on the engine, less stress on the belts, less belt slip, you won't have to nuter the timing, and you can put the high redline that it's known for back in.
Either swap the pulley or upgrade the gearbox, diff and axles. Seems kinda stupid to give away such a fragile car, very inconvenient to have anything break and in this economy most people dont have spare money for replacing parts. As it sits the best option for the winner would be to sell it.
Medium Pulley should be where it is. 420bhp should keep things reliable. Although the new owner should save up for some Uprated Rods and engine refresh!
This car is such a beautiful classic in my opinion. You guy's did an amazing job. Best of luck to everyone that's entered. Safe travels back to Florida.
LHT Performance in Florida has pulleys coated by GripTec that keeps them from slipping look into having the pulleys done by griptec LHT only dose s2k work and has been since they were released john the owner is a very knowledgeable guy and very helpful and nice im sure if you reached out he would have no problem leading you in the right direction
Wooo baby! 490 wheel is waaaaay more than i was expecting! I thought it was gonna put down 450 at the most but, damn that is a very healthy f20. Whoever wins this s2000 is going to be very happy, i know i would be!
@@donatellovrt4557 Yes the diffs on these are particularly weak because the cars had very low torque from factory. You can get them upgraded though. There's a dude named puddymod that makes built diffs for these with custom gearing too.
@@mjay6245 you are absolutely correct! I hate people like that and it's always the people that have tons of money and nothing to worry about! It's like an entitled whine that they do. Same thing like if someone for example backs into your car at the gas station by accident. There's no point in flipping out about it. Especially if the person is apologetic, stops, has insurance, etc. These types of things happen. It's no big deal
Pop the air filter off it should gain RPM'S a lot faster. Looks like that filter's restricting the air intake. I mean I could be wrong but It's literally sucking so hard it's crushing it. You need to get A T fitting Run 2 air filters so It can draw in more air Unrestricted. Or something it looks like the air filters restricting A LOT! Pull the air filter off for a try.
If you listen carefully, you can hear in the beginning when he gases the car, that it starts to blend a little strange before he discovers that Blow off Valve has stuck. After fixing the problem, you hear that it goes super nice ... Good job guys
damn that's crazy power at the wheels for something of that era from just a supercharger. are there any powertrain upgrade options to solve the fragile oem tranny/diff/axles? (assuming they're all weak)
LOVE the Classic Outro! Car sounded Awesome.Uhhh...who'da thunk Kyle would snap an axle??Shane rockin the new doo ! You won't have to twist any arms to get someone to drive a 430-ish HP S2000.
There is a factory tow hook in the trunk and you can pop the circle in the front bumper out and screw it in. One in the rear too. Pretty awesome! But they might have straps too big to take advantage of that.
Stock Ap1 engines with just head studs / head gasket and a heavy duty TCT can easily hold 600-700 wheel the only thing that's a downside from there is the diff - whoever wins this car hit up Ben Herne and get a "PuddyMod" diff built by him. Highly recommend to ONLY buy and run OEM axles or Insane Shaft 700hp shafts.
Man Kyle, the car is beautiful. The upgrades make it a perfect street machine!!! I want this car so bad I can't stand it. Definitely on the site buying merch!!! Still have my million subscriber special shirt. You have the best channel on youtube, love you and the crew!
I had the same issue with my rotrex system on my mx5. I was running turbosmart compact bov and it kept getting stuck open even after getting sent back, ended up switching to gfb and havent had issue since. Make sure you check your not overdoing the input rpm of the charger, people do put to small pulley and they can have issue of breaking
😂 Okay Do Not Clutch Kick The S2000 😂 ( Upgrade Those Silly Stock OEM Axles smfh 🤦♂️)Soooo comical & just love seeing Brent & Kyle vibing out together 🔥
@ 22:00 lets give her a little clutch kicker!😏😎😏 factory axles: please don't!!😢🥺😩 S2000 : braaaammm praaammmm @ 10,00RPM Brent : 😏😬👀 Kyle : 👀😬🙄🫣🤭 That was a bad idea 😂😂😂😂
Awesome !! i just wanted to look out guys there was ZERO Negativity i was only trying to look out for the boys iv been a long time follower since the charlie turbo wagon days in the old house garage i only said it to be informative and looking out much love guys ❤❤❤ that thing is gonna be a serious ripper wen its all ironed out
Don't want to take away from your video Kyle but Goofey with a clean cut LOOKING SHARP. Wish I could enter but with being in the UK not possible. It won't stop me watching all you guys. BB, PFI Speed, WYAT and all the other great creators. 👍
This gave me old school BBoiz vibes, man. I love seeing you an Brent in a freshly tuned car! "That was a bad idea" 😂
Love when Brent and Kyle get in a car together, somethings bound to break.
FaReal😂😢😮
Brent - "careful" Kyle less than a second later facepalming.
Priceless right there.
It’s good seeing you and Brent hanging out like old days
Love Brent's energy. Always so happy and humble.
I laughed so hard when Brent said "careful" and then you let the pedal go and the car didn't move at all. ahahahah what a good video! Whoever wins is gonna have a awesome car!
Kyle, lesson 1 in S2000 ownership: do not clutch kick.
If you're gonna do it make sure you use 1st gear that's all im saying lol
I'd say he learned his lesson 🤣
Yea the diff caps are terrible
Lesson in car ownership in general: do not clutch kick. Unless your car has been modified to take the abuse 😊
What does clutch kick mean
We want the intro back !!!!
I miss the old intros.
@@robertrowland8661 same
Who is we? Things and times change.
False
Much better intro what are you talking about.
Omg you and Brent saying the exact same thing at the same time in the ride was gold. Too cute lmao
I love it when Kyle says “I have to get the page cainted”. 😂
I knew I wasn't hearing things 🤣🤣🤣🤣
That quick “careful” then wide open eyes and smile that came on Brents face when Kyle dumped the clutch and the axle broke had me dying😂, that IRS life sucks sometimes especially when you throw double the HP at it
Kyle with Brent and team CO just ...... feels right. Great video boys!!!
Love seeing Jamie, he was the person who inspired me to get all new teeth. 🙌 it’s been a journey but looks like we both have the ability to smile at the world now 🫡
I’ll be there one day in the next years to come very unhappy with my teeth… but I have other things im after atm ..
@@MyWolffy I feel you brother I had to wait years myself and I had a genetic condition I was gonna lose em all one day. So every time I had a extra $5-10 etc I’d throw it in a jar. Any sec I felt I was up I just threw a little in the jar( trust me I am poor). When I saw Jamie’s done it really pushed me how people were positive towards him. Finally I was able
To have insurance offset a little bit of the cost and I managed to have about $5000 of my own saved 😀. I don’t have the implants but trust me anything is better than living in pain. Hope you get there brother 🙌
Jamie also lost tons of weights and looks healthier
i got metal wire braces as an adult (at 21 years old) like kyle and it completely changed the structure of my face. my jawline is so much better looking now. it gave me a ton of confidence as well as eating better and lifting weights 3x a week i am a completely different person now. if i can do it, so can you... don't give up. we're all gonna make it.
I had a chance to talk to Jamie at Bristol, him and Wyatt, super easy to talk to both super laid back!
The looks that you and brent gave eachother when you broke the axle killed me 😂
Isn't it such a great feeling when you find out what is wrong with your boost and it's a simple fix? Lol love the videos!
It's literally like winning the lottery! Except then I always wonder, what am I in store for lol. Bc It's going to make up for it in some way
@@DMort22 agreed hahahaha
I was chasing my tail on a random issue (timing not boost) and when I found that my O2 extender was rubbing and causing ghost knock it was like winning the lottery lmao.. chased my tail for a year + on that one 😅
S2000 axles are expensive, if the shaft is intact you can rebuild it by replacing the cups, they're the same on passenger or driver side axles. You can buy a passenger side axle and harvest the inboard and outboard joints to return it to stock. The factory axles are thick, it's not the shaft that breaks it's the cv joints that split. Be careful with remanned or Ebay axles. You're better off rebuilding them yourself with used OEM components that buying a remanned one.
That's clever!
DEFINITELY PUT THE BIG PULLEY BACK IN. You'd need to upgrade a lot more stuff for that kind of power. Also, it's going to be making more boost at lower altitude. That way, you can put more timing back in. It takes HP to spin the supercharger, the more boost the more HP going to spinning it. The big pulley would be less stress on the supercharger, less stress on the engine, less stress on the belts, less belt slip, you won't have to nuter the timing, and you can put the high redline that it's known for back in.
Nah
Either swap the pulley or upgrade the gearbox, diff and axles.
Seems kinda stupid to give away such a fragile car, very inconvenient to have anything break and in this economy most people dont have spare money for replacing parts.
As it sits the best option for the winner would be to sell it.
Medium Pulley should be where it is. 420bhp should keep things reliable. Although the new owner should save up for some Uprated Rods and engine refresh!
@@markwalton8644 This is correct, 420 on stock block and trans on this is the sweet spot
@@markwalton8644 engine does not need to be opened at all until 600+ hp lol, the only weakpoints on the s2000 are the diff, trans, and axles.
22:00 With a smile like that after saying careful and Kyle face at the moment he broke it. Got me rollin’ 😂 kept replaying.
Nothing but LOVE miss this. Jamie and Kyle making it happen.
BRUH I swear all anyone needs in life is a homie like Brent, that vibe could cure clinical depression! 🤣
I love when Kyle and Brent are together!
Brent is such a rad dude his energy and vibe is awesome
This car is such a beautiful classic in my opinion. You guy's did an amazing job. Best of luck to everyone that's entered.
Safe travels back to Florida.
22:02 "Careful" and then the smirk as he looks at kyle. Lmaoooo
That was the most chill 500hp I've ever seen lmao I thought it was gonna be 390
Wouldn’t be a boosted boiz build without something broken! Love the build, that little s2000 is a beast!
The clutch kick was so dumb, I love it! Thanks for make the caint the page shirts as well :)
Man I absolutely love it when Brent and Kyle get together... So funny 🤣
LHT Performance in Florida has pulleys coated by GripTec that keeps them from slipping look into having the pulleys done by griptec LHT only dose s2k work and has been since they were released john the owner is a very knowledgeable guy and very helpful and nice im sure if you reached out he would have no problem leading you in the right direction
You and PFI’s vibe are what’s needed at times…
Holy sheesh. Shane with the fresh cut tho 24:20
Dude Brent has such beautiful eyes 💙🤙 amazing!! 3:07
Wooo baby! 490 wheel is waaaaay more than i was expecting! I thought it was gonna put down 450 at the most but, damn that is a very healthy f20. Whoever wins this s2000 is going to be very happy, i know i would be!
You won't be when it breaks in the first few weeks.
Brent goes dad mode with the "careful." Absolutely perfect. lol
Given how those boxes are made of glass over 400hp an axle was really the best that could happen. 😂
are they really that bad? 400hp is nothing now a days lmao
the fuck are you talking about? the f20c are bomb proof , forged every thing , they eat 490 wheel for breakfest
@@donatellovrt4557 Yes the diffs on these are particularly weak because the cars had very low torque from factory. You can get them upgraded though. There's a dude named puddymod that makes built diffs for these with custom gearing too.
Just bought my Caint the Page shirt! I know slim chances but this would make for an awesome street car. Good times and fast rides boys!
I always love the little pop off the limiter on S2Ks
That synced "Dang" was gold!
Where Brent & Kyle go, trouble is sure to follow 😂
I’ve been in tears this whole video when you, brent ,and Jamie get together it’s the best 💪🏾💪🏾
You know Kyle is loaded when he breaks the car and just smiles
What should he do, cry? Cars are expensive toys either you have money or not
@@svenngunnarrustgard1228 fr.
We only live once make it a good time boiz
@Svenn Gunnar Rustgård Some people freak out or get upset/sad whether they have the cash to fix it or not. That's what else could have happened.
@@mjay6245 you are absolutely correct! I hate people like that and it's always the people that have tons of money and nothing to worry about! It's like an entitled whine that they do.
Same thing like if someone for example backs into your car at the gas station by accident. There's no point in flipping out about it. Especially if the person is apologetic, stops, has insurance, etc. These types of things happen. It's no big deal
That “I told you to be careful” and “You did warn me” needs to be clipped and turned into a meme immediately. Comedy gold
I agree BRING BACK THE INTRO 😢
@21:00 Brent’s eyes just get bigger and bigger when Kyle rips from 1st gear all through 4th. 🤩
You guys should do some OG shirts like Brent was wearing
The vw corrado at the end is sick now that's a beautiful car
Pop the air filter off it should gain RPM'S a lot faster. Looks like that filter's restricting the air intake. I mean I could be wrong but It's literally sucking so hard it's crushing it. You need to get A T fitting Run 2 air filters so It can draw in more air Unrestricted. Or something it looks like the air filters restricting A LOT! Pull the air filter off for a try.
1:37 that shirt is badass, I am sure it will sell if any og’s see it…🔥🔥🔥🔥🔥🔥
The amount of knowledge Kyle has learned over the years in incredible he went from not knowing much to now is incredible keep learning Kyle
Not enough to still not break EVERYTHING 😂
If you listen carefully, you can hear in the beginning when he gases the car, that it starts to blend a little strange before he discovers that Blow off Valve has stuck.
After fixing the problem, you hear that it goes super nice ... Good job guys
Kyle can you plz start working on the tube chassis civic 🤘🏻thanks
That was a cool video format, kept it fun , and great power for a daily street car.
damn that's crazy power at the wheels for something of that era from just a supercharger. are there any powertrain upgrade options to solve the fragile oem tranny/diff/axles? (assuming they're all weak)
Cd009 trans, Ford 8.8 and dss axles
As a kid with a S2000 to poor to afford boost... i appreciate these videos!
I’d love to see Kyle dip into other jdm cars
Goofy looking fresh with the hair cut. Need the 'pray for my axles' shirt back!
imagine breaking an axle on stock tires hahah
she's making some good steam !
great video ! hahah
Brents laugh makes me so joyful 🤣🤣
This car would be perfect OEM+ with some nice sticky tires, full exhaust, and a lightweight flywheel clutch.
2nd gear clutch kick that’s a bold move lmaoo. love seeing brent on the channel always
aint no way its not spinning in second with near 500whp
490hp at 9000 rpm, thats the thing about superchargers, the power is very linear. Comes on smooth.
@@Mr15hz Very true but it should still spin second alright at 350whp especially with the all seasons they have on it
Brent is just the best. Can't help but love the guy
The most amazing part of the video seeing goofy cut his hair 😮
Crispy Shifts!! Our Boy is all Grown Up!! Lets Go Kyle!!
Never realized it until I saw the can't the page shirt that the first letters in Boosted Boiz are reversed
20:57
Both said dang at the same time and then looked at each other, that was wholesome
Man I love Brent..❤🤙 guy makes me smile every time i see him.
We need to get PFI Speed to 1 million subs. If anyone in the youtube car scene deserves it its Brent and Jaime!
LOVE the Classic Outro! Car sounded Awesome.Uhhh...who'da thunk Kyle would snap an axle??Shane rockin the new doo ! You won't have to twist any arms to get someone to drive a 430-ish HP S2000.
There is a factory tow hook in the trunk and you can pop the circle in the front bumper out and screw it in. One in the rear too. Pretty awesome! But they might have straps too big to take advantage of that.
You know literally every car has that right?
@DMorton most JDM cars have that. Most US cars don't.
@14:20 anyone else catch the mouse pointer in his editing program swing through? 😂😂😂 Love the content keep it up Kyle. 👍
Ap2 retainers are a must for these ap1s even when stock.
Brent always puts a smile on I really do appreciate it😊
love the content. Man you guys got fresher air then here in Brampton, Ontario
Stock Ap1 engines with just head studs / head gasket and a heavy duty TCT can easily hold 600-700 wheel the only thing that's a downside from there is the diff - whoever wins this car hit up Ben Herne and get a "PuddyMod" diff built by him. Highly recommend to ONLY buy and run OEM axles or Insane Shaft 700hp shafts.
Man Kyle, the car is beautiful. The upgrades make it a perfect street machine!!! I want this car so bad I can't stand it. Definitely on the site buying merch!!! Still have my million subscriber special shirt. You have the best channel on youtube, love you and the crew!
I had the same issue with my rotrex system on my mx5. I was running turbosmart compact bov and it kept getting stuck open even after getting sent back, ended up switching to gfb and havent had issue since.
Make sure you check your not overdoing the input rpm of the charger, people do put to small pulley and they can have issue of breaking
Nice job on this video. The vibe and flow were really good.
That axle hasn't even tried 😂😂
Just "nope"
Wish i still had car friends like you lot! awesome job
Note to self: if Brent says "careful".... don't do it
Gotta love that Honda Rev limiter...man that thing is sweet!!!
Good old brent and kyle content ❤ i love the colorado videos !
😂 Okay Do Not Clutch Kick The S2000 😂 ( Upgrade Those Silly Stock OEM Axles smfh 🤦♂️)Soooo comical & just love seeing Brent & Kyle vibing out together 🔥
@ 22:00 lets give her a little clutch kicker!😏😎😏
factory axles: please don't!!😢🥺😩
S2000 : braaaammm praaammmm @ 10,00RPM
Brent : 😏😬👀
Kyle : 👀😬🙄🫣🤭 That was a bad idea 😂😂😂😂
The frame rate on those rear wheels while he was rowing those gears. You could tell she was making the steam.hell yea
Awesome !! i just wanted to look out guys there was ZERO Negativity i was only trying to look out for the boys iv been a long time follower since the charlie turbo wagon days in the old house garage i only said it to be informative and looking out much love guys ❤❤❤ that thing is gonna be a serious ripper wen its all ironed out
saw the IG post, been waiting for the upload lmaoooo. time to see what yall did 😂
edit : & yes as the guy planning to win the s2k, smaller pulley >>>
Love having Brent around man.
"careful" right before you snapped it was hilarious lol
An employer at an auto parts store once asked me if a s2000 was an mini van. That’s how I knew he was only there because he needed a job.
Shane looking clean with that mop cut off! lol
16:48 the fact you didn't put the 100mm pully back on... Absolutely baffles me
He says at 19:31 "you can't turn the boost down"
It's like bruhhh YES YOU CAN lol
@@shanembradshaw really??? I missed that part 🤣🤦♂️. That blowoff valve is worse than I thought LMFFFAAAOOO
Oh wow, Goofy got a haircut, it looks great. (LOL, Stephen's too)
Amazing insight, always some great educational Dyno videos love it!
Don't want to take away from your video Kyle but Goofey with a clean cut LOOKING SHARP. Wish I could enter but with being in the UK not possible. It won't stop me watching all you guys. BB, PFI Speed, WYAT and all the other great creators. 👍
"It's got a couple of helicoils in there, and you know...." 😀
Haha, dude the thumbnail title had me thinking you wrecked an engine or trans! Axle is by far a best case scenario in this instance.
Boy Shane looks different with a haircut lol
21:05 My mans banging them gears. Im impressed.