This is the first video on our new channel! Thanks for watching, let me know what you think of this printer and its crazy speed. If you're interested in this printer and would like to support the channel use this affiliate link and we get a small kick back at no cost to you! Flsun S1: shrsl.com/4kta3
The reason some of the pei is coming off the bed is that you have to let it cool first, the reason they use pei for beds is that it becomes more sticky as temperature rises and become pretty much non stick when its cold.
Nice, I have an old Creality. considering a newer one. looking at FSsun s1 and Bambu x1c, multi-color looks interesting. Would likely only do top later color change. Would you/can you do that on an Flsun? or only for single pieces? I would imagine filament swap for multiple pieces and the layers would cool too much? I've never tried it, so don't know the limitations.
You kind of can but it’s a huge pain. The X1C is a great printer and if you are interested in multi color I’d definitely go that route. I have a few videos on my main channel two moose design. I just posted on on the smaller one the A1. The P1S is amazing with the AMS too and cheaper than the x1c
It’s pretty crazy, I’ve only run high speed pla in it, the other print speeds with different filaments look pretty normal speed wise. Im going to mess around with some tpu today
O único problema que vejo, para além do preço, é o facto de provavelmente não ser fácil a substituição e mudanças das peças e componentes, pois parecem estar todos metidos e escondidos sem acesso.😢
gnoring the video itself, I just wanted to point out to the people in the comment section, that FLSUN has copious amounts of GPL violations , printers without thermal runaway protections, misleading and outright false claims (see robert cowan's videos) , banning people who are talking negatively about their products (even just pointing out flaws) from their discord servers, even going as far as botting comments (see clough's review). This printer i can only use , GARBAGE, to describe the sheer poor quality of it. As a "tech channel", needing to get that bag and stay in the company's good graces is understandable, but due to how bad this company is in as far as going to asking reviewing scripts of videos containing said printer, I absolutely cannot ignore how dangerous it is if someone happened to buy this printer through influencing. I'm pretty sure this script is FLsun approved, anyway, given how it was nothing but praises about the most minute things about it. TLDR: It's just an ad, DO NOT BUY.
AI is broken. Z offset is limited by plus or minus .02mm. Flsun slicer is trash. The printer was rushed even after delays. If you’re looking for a click and print. Don’t buy it right now. Needs alot of work or opened ssh and let the community fix it
I did notice the z offset yesterday which is weird, the Ai did detect a few things that were not problems, and i personally use orca, I’m sure they will have a profile soon. I tried to get their config file to work and I wouldn’t for me. The flsun slicer is the same as most slicers and looks like prusa slicer, same with the qidi printers. Luckily these issues can be fixing with an update and doesn’t seem to be a printer problem but a rushed problem like you mentioned.
@@TwoMooseToo nah man. Enjoy it. Hope it works great for you. I was just hurting seeing how you handled the unboxing. I little bit rough for my eyes, LOL. That being said I enjoyed the video.
![F.HERO Ft. JSPKK x ลำไย ไหทองคำ x M-PEE - ไม่สนิทบิดหมด (Thai Riders Anthem) [Official MV]](http://i.ytimg.com/vi/kPJZ0UihBfk/mqdefault.jpg)
This is the first video on our new channel! Thanks for watching, let me know what you think of this printer and its crazy speed. If you're interested in this printer and would like to support the channel use this affiliate link and we get a small kick back at no cost to you! Flsun S1: shrsl.com/4kta3
The reason some of the pei is coming off the bed is that you have to let it cool first, the reason they use pei for beds is that it becomes more sticky as temperature rises and become pretty much non stick when its cold.
your partner did all the lifting :)
this thing is a whole washing machine of a 3D printer
😆😆 yeah it is
Put your own kapton tape on the other side to make it double sided. Kapton is awesome to print on. Especially with ABS and ASA
Nice, I have an old Creality. considering a newer one. looking at FSsun s1 and Bambu x1c, multi-color looks interesting. Would likely only do top later color change. Would you/can you do that on an Flsun? or only for single pieces? I would imagine filament swap for multiple pieces and the layers would cool too much? I've never tried it, so don't know the limitations.
You kind of can but it’s a huge pain. The X1C is a great printer and if you are interested in multi color I’d definitely go that route. I have a few videos on my main channel two moose design. I just posted on on the smaller one the A1. The P1S is amazing with the AMS too and cheaper than the x1c
@@TwoMooseToo I think I watched that one, the waste on the color change, so I know the caveat. Thanks, great videos!
Yeah that! It can be reduced I just don’t know enough about it at this point to share. Thanks for watching!
I need this in my life
You could print the biggggggest helmets/masks. Ohhhh think of how big of Lego guy you could make
After the recent firmware update, my S1 works fine , and they told me that there will be updates soon, I hope my S1 will get better and better .
I just updated mine! I'm going to spend some more time with it and do an update video soon.
Things a beast 💪
Tesla truck of printers 😆
what slicing software are you using ?
FLsun slicer
Nice printer... pity about the nude scene at just after 8mins
I didn’t even charge for that
How is it melting plastic this fast?
It’s pretty crazy, I’ve only run high speed pla in it, the other print speeds with different filaments look pretty normal speed wise. Im going to mess around with some tpu today
👏👏👏👏
🙏🏼🙏🏼🙏🏼
How did you get it shipped to you. I get "can't be shipped to your address"
Flsun sent me the printer to review
@@TwoMooseToo I guess you did mention that. sorry (duh)
No worries! Thanks for watching
You do know that the point of 3d printed vases is that you print those in vase mode, right?
It was the pre loaded file on the printer I did not slice it as I mentioned in the video. So not sure why you’re being so sassy sir
@@TwoMooseToo Well because deltas are well known for vase mode, which is a good way to test extrusion and speed.
Hence why they probably put a pre sliced file on the printer
@@TwoMooseToo Not in vase mode, it's bad, slice it properly.
O único problema que vejo, para além do preço, é o facto de provavelmente não ser fácil a substituição e mudanças das peças e componentes, pois parecem estar todos metidos e escondidos sem acesso.😢
gnoring the video itself, I just wanted to point out to the people in the comment section, that FLSUN has copious amounts of GPL violations , printers without thermal runaway protections, misleading and outright false claims (see robert cowan's videos) , banning people who are talking negatively about their products (even just pointing out flaws) from their discord servers, even going as far as botting comments (see clough's review). This printer i can only use , GARBAGE, to describe the sheer poor quality of it. As a "tech channel", needing to get that bag and stay in the company's good graces is understandable, but due to how bad this company is in as far as going to asking reviewing scripts of videos containing said printer, I absolutely cannot ignore how dangerous it is if someone happened to buy this printer through influencing. I'm pretty sure this script is FLsun approved, anyway, given how it was nothing but praises about the most minute things about it.
TLDR: It's just an ad, DO NOT BUY.
AI is broken. Z offset is limited by plus or minus .02mm. Flsun slicer is trash. The printer was rushed even after delays. If you’re looking for a click and print. Don’t buy it right now. Needs alot of work or opened ssh and let the community fix it
Woah man let me have some fun figuring stuff out 😆 at least hit me with a spoiler alert
I did notice the z offset yesterday which is weird, the Ai did detect a few things that were not problems, and i personally use orca, I’m sure they will have a profile soon. I tried to get their config file to work and I wouldn’t for me. The flsun slicer is the same as most slicers and looks like prusa slicer, same with the qidi printers. Luckily these issues can be fixing with an update and doesn’t seem to be a printer problem but a rushed problem like you mentioned.
@@TwoMooseToothinks changed (z-offset adjustment is not so limited any more) is it true?
My ones will land next week.
It’s not called head shape design, the motion style is a delta style just like your bambu is a core xy style.
Thanks for the correction
Lol
First impression was. WTF?? That's not a CNC router or lathe. Take it easy with the machine. It hurts seeing you mishandling it so badly.
Poor printer sad to see it used
@@TwoMooseToo nah man. Enjoy it. Hope it works great for you. I was just hurting seeing how you handled the unboxing. I little bit rough for my eyes, LOL. That being said I enjoyed the video.
Poor printer
Poor thing