Great video. Should run it some more with just water and flush again. Do that until there's no more thermocure in the block. Need the heat from the motor to really activate thermocure to remove all the rust from the block passages. The only thing you did was flush the radiator. Block still has black rusty content in it. I've used it on an old motor that over heated still after using other radiator flush products. Works better then anything else on the market. Downside is it takes a long time to get all of the thermcure out of the block...like 4 to 5 flushes before clear water comes out of the block.
That sound of you taking air in and out on the radiator almost caused me a heart attack and I feel like having bronchial acute after watching this video
Are you where flip flops??? Only I can do that while playing cars. 🤣 anyway love the t-shirt! Always remember to close the drain can’t say I have ever forgot to do that…..just about every time.
I'am your newest subscriber i got that same container of thermocure for free total at are household waste recycling swapshop everything is free it is stuff you can't throw in the trash new motor oil too
I spent time tuning jaguar V8s a few years ago and overheating was an issue there. I became a big fan of waterless coolant, would you consider it in this build?
Hoping with the fan shroud that I ordered and routing the heater hose to the back of the head I get those temps down to 190ish... otherwise yea heads and toast! Aughhhhh
Back in the 70s my father used red devil lie..man would it clean a 350 chey engine, plus radiator.just run for one hour..drain and it was good to go..one risk down fall..if the radiator has one weak pink spot..the radiator is done...iv actually used the works, toilet bowl cleaner...works good..be careful with aluminum..
lol no way lol but the talk is what I do when I get those telemarketings phone calls and a few people said I should try the voice out. so far its doubled my youtube.... I dunno
Great video. Should run it some more with just water and flush again. Do that until there's no more thermocure in the block. Need the heat from the motor to really activate thermocure to remove all the rust from the block passages. The only thing you did was flush the radiator. Block still has black rusty content in it. I've used it on an old motor that over heated still after using other radiator flush products. Works better then anything else on the market. Downside is it takes a long time to get all of the thermcure out of the block...like 4 to 5 flushes before clear water comes out of the block.
I did evenly run several cycles of hose water until she ran clean, good eye! Thanks for adding that tip!
I’m gonna be honest, I didn’t like you in the first 20 seconds, but now I do.
Sub’d
Oh boy! I just gotta know what changed your mind there Max? lol
That sound of you taking air in and out on the radiator almost caused me a heart attack and I feel like having bronchial acute after watching this video
hahahahhaaha thanks for watching
Appreciate your straight talk .
This is definitely a woke-free zone, and it's a great relief !😊
Good product review.
I'll have to keep this in mind.
Take care, Ed.
Thanks for watching!
Love the new t-shirts. Good thing you had the bucket under when you left the drain plug open.
What a dumb move on my part, got to busy worrying about the camera lol
@@ArrowheadGarage I have to get you a platypod you can put on the roof.
Thanks, and you're a character. 😅
Now I've seen everything. The title should be "How to give your bird a blow"
Are you where flip flops??? Only I can do that while playing cars. 🤣 anyway love the t-shirt! Always remember to close the drain can’t say I have ever forgot to do that…..just about every time.
When it's 115 outside... flip flops are REQUIRED LOL.
Glad I found you over at Buck's place, pretty dog gone cool stuff man!
Oil pressure almost gave me a heart attack lol, didn’t realize it wasn’t hooked up
lol I bet that was scary to watch... like come on come on... start building lol
I'am your newest subscriber i got that same container of thermocure for free total at are household waste recycling swapshop everything is free it is stuff you can't throw in the trash new motor oil too
Might work better with distilled water that won’t add to your rust issue.
For the flush it didnt' need it, but I can see your point!
I did have dinner!!
I spent time tuning jaguar V8s a few years ago and overheating was an issue there. I became a big fan of waterless coolant, would you consider it in this build?
Tell me more about it!!!
what is that thing at 9:09 that he presses to start the engine?
That is a remote starter switch, check it out here: amzn.to/3W3kOZl
Check space between water pump impeller n plate. If it's ok heads are toast
Hoping with the fan shroud that I ordered and routing the heater hose to the back of the head I get those temps down to 190ish... otherwise yea heads and toast! Aughhhhh
Back in the 70s my father used red devil lie..man would it clean a 350 chey engine, plus radiator.just run for one hour..drain and it was good to go..one risk down fall..if the radiator has one weak pink spot..the radiator is done...iv actually used the works, toilet bowl cleaner...works good..be careful with aluminum..
Hummm I might have to try those!!! Thanks for sharing!
what if you have the radiator out of the car? shoild i just fill it with vinegar and let it sit over night and flush it?
Yep plug it up and pour in some vinegar, shake it around a few times and let it sit for a day.
Did this guy just blow his radiator?
Nope... running way better than before :)
Better a Radiator than what you blow ...LOL
Why u talk like dat. Annoying. The fame getting to u?
lol no way lol but the talk is what I do when I get those telemarketings phone calls and a few people said I should try the voice out. so far its doubled my youtube.... I dunno
@Ape Things 7 I was wondering this as well!
It's the Irish accent.