I've been watching your playlist, and I really have to congratulate you on the thoroughness of it. There's only one part I'd like if you could expand, especially on this tutorial, is when you are selecting the details, in this case of the contact (Formulation, detection method and so on), to explain why you chose those setting. I think that would really improve the educational factor of your videos. Keep up the good work!
Sir .It's my request to you to upload a videos of all the possible problems faced in Analysis of mechanical components in Oil Gas ,Automotive, plastic industry . If video not possible atleast describe a problem faced . Your videos are outstanding.
Rifel, sketch your problem description in a piece of paper or make a one page slide and send me to engineeringtutorsdesk@gmail.com I will try my best to help you in this.
Rifel, For more Tutorial Videos Click on the link below ANSYS Workbench th-cam.com/play/PLOahOE6DpL4qq_QxPHieAeVejzDP1yIYW.html ANSYS Multiphysics th-cam.com/play/PLOahOE6DpL4qojPO7_GkgkVC-cB8KFMeC.html Hypermesh th-cam.com/play/PLOahOE6DpL4puVylWdpHWRoGhIfswDc6T.html Creo Simulate | Pro Mechanica | th-cam.com/play/PLOahOE6DpL4qvb2Z0Ir8SwvUyv0qnRGH4.html Creo Parametric Tutorial th-cam.com/play/PLC1voSxuLSym29Dt_xNnIJxBCtE-k9iul.html Pro E Wildfire Tutorial th-cam.com/play/PLLBsoJO8DYcVGLa_se2y5Ao0Vzwy6TUbz.html For online training on ANSYS Workbench | Creo Parametric & Simulate | Pro E Wildfire & Mechanica | HyperMesh | Contact: engineeringtutorsdesk@gmail.com
Greetings! ! Sketch your problem description on a piece of paper, mention your objective and what are you looking for? And send the snapshot to my mail ID engineeringtutorsdesk@gmail.com. I will study and revert back to you.
Hi @CAEWorldwide, I am trying to run a 2D analysis. My body is on xy plane..still I get an error Plugin error: attach failed, No valid bodies found. Please can you help on this? PS: I also tried to sort it with CAD configure option in ansys, however that doesn't work
I've been watching your playlist, and I really have to congratulate you on the thoroughness of it.
There's only one part I'd like if you could expand, especially on this tutorial, is when you are selecting the details, in this case of the contact (Formulation, detection method and so on), to explain why you chose those setting.
I think that would really improve the educational factor of your videos.
Keep up the good work!
very nice video... and you made the engineering analysis, so even being a very simple simulation, it is very important.
Sir .It's my request to you to upload a videos of all the possible problems faced in Analysis of mechanical components in Oil Gas ,Automotive, plastic industry .
If video not possible atleast describe a problem faced .
Your videos are outstanding.
very good,....very intersting...
I'm learning Ansys,... so challenge
Rifelino, I appreciate your enthusiasm of learning ANSYS, connect with me for any support engineeringtutorsdesk@gmail.com
I'm so excited you reply my comments...thanks.
Is it possible to simulate grinding process in Ansys?
how should to begin? whereas I'm very beginner..
Rifel, sketch your problem description in a piece of paper or make a one page slide and send me to engineeringtutorsdesk@gmail.com I will try my best to help you in this.
Rifel, For more Tutorial Videos Click on the link below
ANSYS Workbench
th-cam.com/play/PLOahOE6DpL4qq_QxPHieAeVejzDP1yIYW.html
ANSYS Multiphysics
th-cam.com/play/PLOahOE6DpL4qojPO7_GkgkVC-cB8KFMeC.html
Hypermesh
th-cam.com/play/PLOahOE6DpL4puVylWdpHWRoGhIfswDc6T.html
Creo Simulate | Pro Mechanica |
th-cam.com/play/PLOahOE6DpL4qvb2Z0Ir8SwvUyv0qnRGH4.html
Creo Parametric Tutorial
th-cam.com/play/PLC1voSxuLSym29Dt_xNnIJxBCtE-k9iul.html
Pro E Wildfire Tutorial
th-cam.com/play/PLLBsoJO8DYcVGLa_se2y5Ao0Vzwy6TUbz.html
For online training on ANSYS Workbench | Creo Parametric & Simulate | Pro E Wildfire & Mechanica | HyperMesh |
Contact: engineeringtutorsdesk@gmail.com
do you have any video on pull out test of a fiber from a concrete can you help?
Why does it need to activate the large deflection option?
And according to solver type(you choose direct) , what is going to be different?
watch 1.25 speed
hello sir,
I have been watching your tutorials and its amazing and very useful.
will you please give me the part model files of this example.?
Write your request to engineeringtutorsdesk@gmail.com
how do you obtain the numbers for the friction?
Could you tell me how to make a "Linear strain triangular" on ansys? i need your help... thks
Greetings! !
Sketch your problem description on a piece of paper, mention your objective and what are you looking for? And send the snapshot to my mail ID engineeringtutorsdesk@gmail.com. I will study and revert back to you.
Hello sir,
This video is helpful. Can you send to me a geometry file? Thanks.
When i try to import the 2d geometry in the mechanical window i get the following error: No valid bodies found for 2D Analysis in part Part
+Rick Dickhof ensure that 2D geometry lies in XY plane only. If not, move the body to the XY plane.
Hi @CAEWorldwide, I am trying to run a 2D analysis. My body is on xy plane..still I get an error
Plugin error: attach failed,
No valid bodies found. Please can you help on this?
PS: I also tried to sort it with CAD configure option in ansys, however that doesn't work
Sir PL design part files also
simulation is good but mechanical model is wrong , good luck
Please help us understand what is wrong