Hey a very humble request, I have manufactured my one CNC machine, More specifically a lathe machine, and was wondering if there's a way that you would share the procedure to install the Mach 3 plug ins, Perhaps I can install it in one of the oldest laptop at college so I don't have to spend literally hours weeding out the program in order to make it compatible with my humble Mach 3 CNC Lathe??
I have a fanuc series Oi-TC and I can’t get the CSS to work I’m using G97, G50 and G96 and is not taking it is there a parameter setting? Any help will be greatly appreciated
Hello. Enybody known how to make a program with mastercam for thread half straight and half taper. For example first 2 inches straight than next 3 inches taper minus 1 degree . Using G32. Thank you
i machined a perfect thread by seeing your vedeo. thank you sir
Still relevant really learnt how to speed up this process, thanks
This is good.. I like how you always refer to the G-code.
Thanks for the through explanation on every code
Best teacher for me
awesome sir you cleared how to selet the thread dimension very well keet it up sir
Thanks for that feedback Ritesh. I appreciate it a lot. Tom
Very good balance between explaining the necessary information and too much of it. Great work, keep up plz!
Thank you for that feedback and thanks for watching my channel. Tom.
Thanks Tom, Your videos really helpful and understand very clearly. Can you videos about the Internal Metric videos would be appreciated.
the best detail we need to know
Thank You sir,
Can you upload how to make threading model in master cam X5
U r the best...
Great video sir!!!!! thanks!!!!
derek chan Thanks.
hi Tom
can u make any video for acme thread cutting
Hey a very humble request, I have manufactured my one CNC machine, More specifically a lathe machine, and was wondering if there's a way that you would share the procedure to install the Mach 3 plug ins, Perhaps I can install it in one of the oldest laptop at college so I don't have to spend literally hours weeding out the program in order to make it compatible with my humble Mach 3 CNC Lathe??
Sir please make one video how to create face thread in master cam x5
greetings!! great video, How do you draw the 1/4 -20 bolt ? that would be great if you can make a video...
Thanx
Tom...I'm getting my X8 mill. Certification...I would like to know do you have an X8 lathe program...Russ S
Miku Butterfly Games1313 What are you looking for specifically in the lathe program?
How do you make a left hand thread in mastercam? Tia!
I have a fanuc series Oi-TC and I can’t get the CSS to work I’m using G97, G50 and G96 and is not taking it is there a parameter setting? Any help will be greatly appreciated
Nice information
what will happen if we give negative value of thread angle
Sir can you please help me how to program api taper thread in mastercam X5
Your Mastercam posts G76 P and Q without no decimal point. Do you modify the post to do that?
Ro Cuevas Yes you would. Thanks
Can u give me link to download mastercam latest version???
would you please make video ID threading and ID groove of Mastercam sir.
derek chan I will do it soon. Thanks for watching Derek.
how can i get this software. thanks
+GERARDO c Go to Mastercam.com and it will guide you to a reseller depending on what state you are in.Thanks. TS
Tom Stikkelman also thanks for the great videos
Angle face draw please
Great...thnx
3/8 19 Bspt how much OD Dia?
and how to can calculation this parameter.Plz my help any person
I have watched a lot of your videos. You are brilliant at explaining programming/mastercam clearly. If you don't teach fulltime, you should..
Hello. Enybody known how to make a program with mastercam for thread half straight and half taper. For example first 2 inches straight than next 3 inches taper minus 1 degree . Using G32. Thank you
Programare cnc filetare