I’m using the Sony A1, time lapse trigger and slider, everything is up-to-date with the firmware, press the shutter release and the camera starts taking photos but the slider, pan and tilt is not moving. So frustrated. Wish I knew what I'm doing wrong.
I am a bit confused. They don't list older cameras as being compatible. I have a Canon 6D and A7S that I use explicitly for milky way timelapse. Do I NEED the timelapse trigger to do "move shoot move" or can I buy a shutter release cable that plugs into one of the modules of the PONS PT head and it will move shoot move? I just want to make sure I can do that before I buy the whole setup. Thanks!
It is super disappointing to buy this system and have zero support. The PONS PT system is shit, it has no precision, it is out of phase, it rotates too much or does not react to the adjustment and pauses when more than 2 stops are selected... the PONS PT only serves as decoration. It works to go from A -B without doing complex pan or tilt like tracking a product. and there is no intention to correct it or show face.
It works also with Weapon Axis Pro? On your website it says "The timelapse trigger can only be adapted for using with Micro 2 series motorized rail slider"
Nikon d750 should be work, could you contact hans@zeapon.com and provide more information? I would like to know which step you followed in the video has issue or the whole process done and TP trigger doesn't work? please let me know in email.
@@ZEAPONTech also the firmware update . It doesnt tell which version that i currently have. And i updated it 4-5 time. I didnt even know it even update. I own both zeapon micro 2 +. And Timelapse trigger.
Hi there. Thanks for the video. Could you please supply more information regarding the camera setup? Im using a Fuji XT2 and have it setup in Manual as you describe. However, like the other poster, the camera settings remain fixed regardless of a change in lighting conditions.
Hi, your review is great and helps a lot. I start to make the camera mode with the timelapse trigger, everything was worked. But I test it inside my room so when I close the lights the trigger didn't change the exposure. I have my camera in a rear sync as you said and in manual mode, I add all the settings for my timelapse, so when the light will change the trigger will change the settings of my camera for smoother results? With kind regards, Ben.
Thank you so much for the in-depth information. Sadly my slider isn't moving at all and the app doesn't count down. So the camera stays static and just does a regular interval-shooting. I updated all the firmware and I'm using an A7III... Any suggestion?
@@MOTIONTOGRAPHY Actually yes. I had to turn off the "silent shooting mode" within the interval shooting menu in the camera (Sony A7III). After that, I was able to use the "camera mode" of the Zeapon App. But to be honest, I still have not done a proper Timelapse yet, because the weather sucks right now in Germany ;-)
@@bogieDK sorry for the delay, it's another round of lockdown in the city 😞, would you mind purchasing from online stores ? Or you can also contact cher@zeapon.com directly
@@ZEAPONTech no I don’t mind buying it online, but can’t find it anywhere..😔… just bought the Zeapon slider and Would love to review it with some epic timelapse..😜😋
Thank you Zeapon for coming up with these affordable and great technologies
thank you very much for the support!
This looks amazing, great addition for the slider
thank you!
I’m using the Sony A1, time lapse trigger and slider, everything is up-to-date with the firmware, press the shutter release and the camera starts taking photos but the slider, pan and tilt is not moving. So frustrated. Wish I knew what I'm doing wrong.
I am a bit confused. They don't list older cameras as being compatible. I have a Canon 6D and A7S that I use explicitly for milky way timelapse. Do I NEED the timelapse trigger to do "move shoot move" or can I buy a shutter release cable that plugs into one of the modules of the PONS PT head and it will move shoot move? I just want to make sure I can do that before I buy the whole setup. Thanks!
A standard shutter cable will work. I’ve used the PONS Head with my 6D.
@@shaunmaddox have been testing my PONS PT and Micro 3, using my cables from my Syrp setup and works fine! Thanks.
@@calebwhite681 Oh, my pleasure! Good to hear it’s going well
C'est magnifique 👏👏👏
It is super disappointing to buy this system and have zero support. The PONS PT system is shit, it has no precision, it is out of phase, it rotates too much or does not react to the adjustment and pauses when more than 2 stops are selected... the PONS PT only serves as decoration. It works to go from A -B without doing complex pan or tilt like tracking a product. and there is no intention to correct it or show face.
Good tutorial. Can I use it without the slider with a wired connection as a stand alone timelapse trigger device as well ? Thx!
불가능
It works also with Weapon Axis Pro? On your website it says "The timelapse trigger can only be adapted for using with Micro 2 series motorized rail slider"
Yes, it also works with Micro 3 and Axis
Hello. Can the trigger be connected to the new LUMIX S5II? Thanks
I’m curious as well
What kind of cable do I need to trigger the Micro3 Slider and for the Sony A7III?
It use the shutter cable.
Very good day. I would like to know if in the Pons PT. Would a Black magic 6k Pro film camera fit?
I tested this trigger with Sony A7C but it did not work in Manual Mode. Could you please advise me
it can work properly in M dode?
this Timelapse trigger is so confusing to use. I have bought one but can't use it. I am using Nikon d750
Nikon d750 should be work, could you contact hans@zeapon.com and provide more information? I would like to know which step you followed in the video has issue or the whole process done and TP trigger doesn't work? please let me know in email.
@@ZEAPONTech in custom timelapse mode i set it to take 240 photos. But it only takes 24 photos.
@@ZEAPONTech also the firmware update . It doesnt tell which version that i currently have. And i updated it 4-5 time. I didnt even know it even update. I own both zeapon micro 2 +. And Timelapse trigger.
we can use it to shoot long exposure? and use in panorama mode?
What is your Sony model?
Good tutorial, bad audio. You can hear people talk in the background and there is some buzzing sometimes. Really distrackting.
Stop moaning 😅
Does this trigger work with Nikon z6ii
kindly check here for compatible list: www.zeapon.com/products-detail/i-49.html
Ни одного патча за все это время. Он в выключенном состоянии разряжается.
Нет интеграции с производителями камер, например gopro
Hi there. Thanks for the video. Could you please supply more information regarding the camera setup? Im using a Fuji XT2 and have it setup in Manual as you describe. However, like the other poster, the camera settings remain fixed regardless of a change in lighting conditions.
Sorry for the late reply, I believed problem solved by reinstall the firmware, right? customer service replied you on email.
Hi, your review is great and helps a lot. I start to make the camera mode with the timelapse trigger, everything was worked. But I test it inside my room so when I close the lights the trigger didn't change the exposure. I have my camera in a rear sync as you said and in manual mode, I add all the settings for my timelapse, so when the light will change the trigger will change the settings of my camera for smoother results?
With kind regards, Ben.
kindly contact our after-sale at service@zeapon.com
트리거는 노출에 관여하지 않는다 A모드이기 때문에 카메라가 조절할 뿐
You have to be in aperture priority for it to work.
Sony A7M3 does not have an application installation. Can I still use it?
If you get interval shooting setting in system, then for sure you can use it
can this control Canon R5?
kindly check the compatible list at the end of the video
I feel like they are leaving models out...EOS R isn't old, but the RP is supported which is around that same time.
It's adjusting the settings?
How to work with Nikon?
Thank you so much for the in-depth information. Sadly my slider isn't moving at all and the app doesn't count down. So the camera stays static and just does a regular interval-shooting. I updated all the firmware and I'm using an A7III... Any suggestion?
I'm having the same problem, did you fixed the problem?
@@MOTIONTOGRAPHY Actually yes. I had to turn off the "silent shooting mode" within the interval shooting menu in the camera (Sony A7III). After that, I was able to use the "camera mode" of the Zeapon App. But to be honest, I still have not done a proper Timelapse yet, because the weather sucks right now in Germany ;-)
@@stephanyandreas Ciao Andrea, anche io ho una a7iii ma non riesco a farlo funzionare, potresti dirmi come settare il tutto? ti ringrazio molto.
How to connect Sony a7c or zv-e10 to slider motor with wire without time lapse trigger? What wire should I buy? Didn't find information
Did. you get it to work with a wired shutter ? because from what I know, it won't work on a7c
@@aionz82 Couldn't find the wire. Already bought a time-lapse trigger
what camera are you using??
I was using old sony A7 for this demostrate, just showing even an old type camera could cooperate with TP trigger.
where can i buy this? :)
may i know where you from ?
@@ZEAPONTech I am from denmark
@@ZEAPONTech Hmm… so not possible?..😔
@@bogieDK sorry for the delay, it's another round of lockdown in the city 😞, would you mind purchasing from online stores ? Or you can also contact cher@zeapon.com directly
@@ZEAPONTech no I don’t mind buying it online, but can’t find it anywhere..😔… just bought the Zeapon slider and Would love to review it with some epic timelapse..😜😋
Get a mic.. its $10.