How can anyone with any mechanical ability not like what this man built. Yes I know he did not invent this type cutter but, he did manage to make his own. He should get at least a thumbs up on his machining . Yet alone it works!
Such a cool machine. To bad we didn't get to see it in action. If the belt slips will the cutting blades hit each other? I experienced something like that on a factory build machine. You should consider a pivot point between the green and yellow part to make it work better in uneven terrain.
The blades do not touch each other, I shorten them. Between them the distance of 2 mm. Mower follows the uneven terrain, it moves freely hinged on tractor. Video mower in action will soon
only problem I see is the blades hitting each other when they get out of time(belts WILL slip). A little stagger like a lawn mower deck would prevent that.
Cool concept BUT the belt won't keep blades in time and the cutters will be banging in to each other. Thats why commercial machines use gear drives to the arbors. You'll have to widen them out until the cutter barely miss and set the bar to trail at an angle so it will cut between the cutter heads , or make a timing gear set-up.
Excellent work,well done .But let's see it doing the job you built it for !!.I think there may be a small problem , if the belts slip allowing the knives to touch each other
Dang Dude, KUDOS! That's a lot of engineering and machining! Nice Paint! Already trying to figure out how to improve upon, wider swath, additional cuters, two-ended skid plate, etc. How does water drain from the open standpipe? Cheers!
Bit of a major mistake not leaving enough blade clearance between the discs, not to mention the danger of no cowl, what happens if a blade brakes or a bolt comes off....law suit.
New test of rotary mower th-cam.com/video/8cGhyZvrq-k/w-d-xo.html Build of a mower th-cam.com/video/eEzMlek5sPE/w-d-xo.html First test th-cam.com/video/U6wrGQgnnEA/w-d-xo.html
That is some crazy looking machinery there man, i am thinking it doesn't work well or the video would be a tad longer with a demo of some sort. LOL The tiny blades are really odd. anyway. ya got me to see this I guess.
I'm talking about the two blade belt. If it rubs at the crossing point it won't last. I'm not trying to be an ass like so many TH-cam posts, I'm actually trying to help. If the belt rubs, it Will fail!
Be careful with those homemade products cause they dont have the safty features as store bought ones do so spend a bit more money on a store bought one and be safe
awww there there.... it's ok... you're allowed to talk :o) It would probably make the video better if you learned how to say something while doing the videos like even basics of why you're building it
Добрый день! На своём канале о минисельхозтехнике мы ведём рубрику: «Пятничный дайджест интересных видео». В очередном выпуске хотим презентовать зрителям часть Вашего видеоролика. В описании видео будет обязательно размещена ссылка на исходные видеоматериалы. Мы уверены, что благодаря нашему видео и размещенной ссылке, Ваше видео получит дополнительные просмотры, а канал подписчиков. Надеемся на дальнейшее долговременное сотрудничество!
How can anyone with any mechanical ability not like what this man built. Yes I know he did not invent this type cutter but, he did manage to make his own. He should get at least a thumbs up on his machining . Yet alone it works!
One of the most dangerous things I have ever seen, I love it.
Such a cool machine. To bad we didn't get to see it in action.
If the belt slips will the cutting blades hit each other? I experienced something like that on a factory build machine.
You should consider a pivot point between the green and yellow part to make it work better in uneven terrain.
The blades do not touch each other, I shorten them. Between them the distance of 2 mm. Mower follows the uneven terrain, it moves freely hinged on tractor. Video mower in action will soon
Rolingmetal
bvv sa face
Скаут т25
only problem I see is the blades hitting each other when they get out of time(belts WILL slip). A little stagger like a lawn mower deck would prevent that.
after modification the blades do not get to each other 2mm, now everything is fine. It used to be a problem, blade blows could be heard.
Druze,ovo je rotaciona kosacica nije tarup 😊 uostalom svaka cast 👌💪
how to plant it on an ATV if you can eat then I will be very glad to share your thoughts
Cit au discurile in diametru???
where did u get the universal joint at 5:30
the crossed belt will be fine. i have used machines designed like that and have reversed conveyors that way they run many hours. nice work!
How often is it necesary to change the twisted belts?
Молодець! Як служать ремні після сезону експлуатації ?
За весь час експлуатації замінив лише один ремінь, той великий що йде від ВОМ. Ремені купую тільки якісні.
What do you have for skids under the drums?
Jeśli pasek nie będzie dobrze naciągnięty Dobrze mi się wydaje, że ostrza mogą zajść jedno na drugie jak się koła nie zgrają?
Ostrza znajdują się w odstępie 1-2 mm.
Thank you for the link back to this video. Great job building this.
as the swinging blades are so close - what stops them from hitting each other?
Blades shortened and do not touch each other
Great thing!!! But we need to see it in action, right?
awesome but I wanted to see it in action
John Biggs me too which is why I thumb down the video
Nuk
Video mower in action will soon
you don't need to give it a thumbs down just because he did not show it yet. It's a great project.
pezo 206 68 zuocasti remen
Trabalha muito bem! Esse torno também foi você que fez?
You should also have the proper safty equiptment for whatever product you are using
Доброго времени суток! Спасибо за такую простую и эффективную конструкцию. Скажите, пожалуйста, какой ширины получается прокос?
Здравствуйте. 100 см
Cool concept BUT the belt won't keep blades in time and the cutters will be banging in to each other. Thats why commercial machines use gear drives to the arbors. You'll have to widen them out until the cutter barely miss and set the bar to trail at an angle so it will cut between the cutter heads , or make a timing gear set-up.
The blade does not touch each other, which I shortened so that the gap between them was 2 mm
Good. It looked like they intersected on the video.
супер получилась косарка
А фрезер у вас саморобний?
Дякую. На цьому каналі усі станки саморобні
Nice job with the fabrication, I'm impressed
Thats pretty neat but I wish we could see it working as well
th-cam.com/video/U6wrGQgnnEA/w-d-xo.html
Nice job...would like to see it run
So does it mow?
Excellent work,well done .But let's see it doing the job you built it for !!.I think there may be a small problem ,
if the belts slip allowing the knives to touch each other
Knives do not touch each other, they shortened.
Dang Dude, KUDOS!
That's a lot of engineering and machining! Nice Paint!
Already trying to figure out how to improve upon, wider swath, additional cuters, two-ended skid plate, etc.
How does water drain from the open standpipe?
Cheers!
just look at old mowers and you will see how to make it
Kann man das auch Kaufen?
can you tell us what size the shaft is? you can give us some drawings?
The drawings have not survived
Mistrz,kosiarka super ale tokarko frezarka nie gorsza traktorek też fajny daje suba
In Ireland you would get one them mowers for nothing under a hedge somewhere. Them rotary mowers were being buried and scraped
wow all them toys to play with to make things leaves me out
Thank you for the demonstration and the video.
Bit of a major mistake not leaving enough blade clearance between the discs, not to mention the danger of no cowl, what happens if a blade brakes or a bolt comes off....law suit.
Super meserias bravo lor 👍
impressive work of craftsmanship
*лайк отличная коса получилась я тоже люблю технику и начинающий Bloger TH-cam*
awesome build I subscribed to see the rest when you get it going thumbs up
New test of rotary mower th-cam.com/video/8cGhyZvrq-k/w-d-xo.html
Build of a mower th-cam.com/video/eEzMlek5sPE/w-d-xo.html
First test th-cam.com/video/U6wrGQgnnEA/w-d-xo.html
Cum pot sa văd când faci proba
до первого муравейника!
Похоже и до муравейника не доехал
Hello, please drop in the drawings with the dimensions. I really need it at home.
Will you show me how you work?
Yes, in the near future.
Beautyfull💪💪💪👍👍👍🇷🇸🇷🇸🇷🇸
Do u have project of this mower?
I do not have
это что самодельный станок?
На этом канале абсолютно все самодельное
@@Homemadelathemachine станок просто супер,мне бы такого
дело мастера боится! лайк!!!
A ile. Ci za to wyszło gdzieś
That is some crazy looking machinery there man, i am thinking it doesn't work well or the video would be a tad longer with a demo of some sort. LOL The tiny blades are really odd. anyway. ya got me to see this I guess.
закиньте пожалуйста чертежи с размерами
А как увас натяжка ремней
На роторах шайбами. Шків з двох половинок, між тими половинками шайби ставляться.
Resenje sa ukrstenim kaisem nije najbolje jer ce u jednom trenutku doci do udaranja nozeva. Vec su to neki radili i lose se pokazalo
Please show us working on grass or hay
Tarım aletlerinin içinde cıbıldak karıların ne işi var
koymazsanız sevinirim
If that thing runs more than 5 minutes at speed before that crossed belt eats itself, I would be shocked.
On older combine harvesters belts intersect and work very long.
I'm talking about the two blade belt. If it rubs at the crossing point it won't last. I'm not trying to be an ass like so many TH-cam posts, I'm actually trying to help. If the belt rubs, it Will fail!
Tom Wise it won't be a problem the old hay equipment blowers combines they all did that
por favor si vc pode entre em contacto com migo que fazer um torno do mesmo do seu obrigado
Please let us see running this thing... :D
I wouldn't call this "homemade" shop built would be a better description.
Be careful with those homemade products cause they dont have the safty features as store bought ones do so spend a bit more money on a store bought one and be safe
Молодец просто.
Выглядит сурово
SMFH....nice but show it doing what it's supposed to do.
What are you doing From 0:29 1:35
Доброго времени суток. вы по русски разговариваете?
Да
Мне понравился ваш вариант косилки. Могли бы вы сказать какой диаметр дисков
48см
Спасибо
І як я таке прозівав? 👌👍👍👍
Das ist ein mähwerk
awww there there.... it's ok... you're allowed to talk :o) It would probably make the video better if you learned how to say something while doing the videos like even basics of why you're building it
You should have stated at the start that you wont show how it runs! Wasted my time waiting for the testing. Wont do that again.
на это есть двухсторонний клин
Просто супер молодец
extraordinary
Beautiful ... Just a shame that it does not work.
Ima li neko nacrt kosacice
What you making let me know I'll get you one ok
👍
Very good
Mouse at 1.54
It is not a mouse, this feather
👌👍👍👍👍👍👏 Класс
HI there. Why can you talk and explain what you doing? If I did really have an interest in this subject I would have been gone after 20 seconds!
Well Done!
Well done thanks
Super
Ефективно! Клас
Na nízkou trávu snad dobrý .
svaka cast
👋👍🤝
Конструкция рамы слабая!
I want to see it cut grass
th-cam.com/video/8cGhyZvrq-k/w-d-xo.html
Молодец
is a good work!
👍👍
Nice
Добрый день!
На своём канале о минисельхозтехнике мы ведём рубрику: «Пятничный дайджест
интересных видео».
В очередном выпуске хотим презентовать зрителям часть Вашего видеоролика.
В описании видео будет обязательно размещена ссылка на исходные
видеоматериалы.
Мы уверены, что благодаря нашему видео и размещенной ссылке, Ваше видео
получит дополнительные просмотры, а канал подписчиков.
Надеемся на дальнейшее долговременное сотрудничество!
Добрий вечір. Я не проти.
@@Homemadelathemachine а какие у вас размер шкивов ?
Уточните какие шкивы вас интересуют
For museeooo😂
smart man
:)
Продаётся
Ні
That is ONE DUMB WASTE OF TIME, MONEY, STEEL AND EFFORT...
To much time wasted on Lath work . wanted to see it cut Grass;