Easy Barn Doors For A Bedroom Closet
ฝัง
- เผยแพร่เมื่อ 6 ธ.ค. 2019
- Looking for step-by-step instructions? Head over here: bit.ly/3467gQ8
Affiliate links to things you see in this video:
6 ft. barn door hardware: amzn.to/2LNHRV5
12-inch barn door handle: amzn.to/2DVoogD
Sliding barn doors add great character to any room, and when you have the space, they do wonders to accentuate a bedroom closet. I recently replaced the closet doors in my daughter's bedroom with these closet doors made form cheap pine lumber, plywood and hardware purchased on Amazon. If you'd like to add a dramatic look to a room with a rather simple woodworking project, take a look at the build video below - step-by-step instructions are on Gadgets and Grain: bit.ly/3467gQ8
#woodworking #DIY #BarnDoors - แนวปฏิบัติและการใช้ชีวิต
damn, not only am i impressed about your woodworking skills but your video shooting skills also deserves an applause! amazing
My father was a handy man, I miss him so much. I know he would be down to do this project with me.
Same here. I miss mine so much!
Wow the editing and filming is so impressive. I love the little instructions written on tape or on the wood. Super cute and pleasant to watch!
Your family is blessed to have a handy papa!
Love the vibe of this straight-to-the-point video with the music and all! Thank you so much for the inspo!
Amazing job you did for your daughter! You are a master carpenter!
I liked this video for involving your children in this project,that made me more personal to this video,great thing Mr.go ahead we want more videos like this
Wow you just gave a great Idea on how to put up a barn door for my daughters apartment. Thank you and great job.
Im going to start building a barn door for my daughters play room and this helped a lot! thank you!
Uhg and I love that it's two doors that open to a full view of the closet!! So good yall!
Great video and the doors are beautiful! Your kids are blessed to have you:)!
I love how you showed all the details. You have answered all our questions. Great music and helpers too.Thanks
Great video, love the kids. I’ve been using the roller wheel floor guides, just because I don’t like cutting the groove in the bottom
kids are so cute, you are a great dad.
Love them. Great job!
You’re amazing! This is awesome! Thank you for your workmanship all around, superb!
Ty for sharing, learned a lot . What a precious young lady.
Great info and great pace in the video. I will add... I put the grove in after and I forget to remove the screw... I was building a door for a TV cabinet with barn doors... needless to say my blade was not happy....
Looks Amazing...Well Done!
So well produced! Great vid!
Great job and great tutorial. I will be using this for sure. Thanks.
Father of the year 👍🏾👍🏾👍🏾
Very nicely filmed. Great job. Use a router for the groove. But doesn’t matter if you can get the job done. Groove is in the heart!
Woodwork + Details 👏🏻
Great job! looks so good.
This is one of the best edited videos I have ever seen! You convey so much info with camera frame and written word that it’s a pleasure to watch. Please get into major motion pictures, haha
I love your tutorials, so informative with the details!!! Thank you! I'm a new fan!
I would do that groove at the bottom of the door on the tabe saw as you did for the plywood panel. I would cut the groove out on the precut frame (lower piece) prior to assembling the door.
Thank for sharing loved especially working with the kids God Bless
Great idea, great video! I’m getting ready to do just this
Nice work!!
Looks good.
Brilliant build keeping both sides the same. Many doors only have the decorative bracing on one side.
So amazing to do this with kids.
Great work! I love this TH-cam Channel!
Awesome job...
You did a really good job there buddy. 👍
Awesome video, thx! just what I was looking for! (and beautiful family!)
Great job 👍
I really like the style of shooting/instruction.
Great job. Kids are so cute!
Cut that groove with the table saw before assembly, or cut the groove with a small trim router and a guide if already assembled.
Clément Charlebois I agree. A small trim router and slot cutting bit. Easy.
Dude, Great job. you make it look so easy. Even i can do it.
great video brother .. .very informative .. , love the ending !!!
Great work. Groove in bottom... Measure out pre assembly cut into pre install. Attache to door frame with groove already made. Circel saw or router. Also wet paper towels under all drilling collects dust.
Thank you! Seeing him on top of a ladder using a circular saw mostly above his chest made me so nervous! I wonder if just a plunge router would also work for the groove?
For sure danger! Always better to work on a smaller more manageable piece at grade level than risk adjustments with heavy ones while elevated. All considered... Well executed! As for the end blooper... Danger!!! Lucky no fall on little one. Always secure while staging. Literally anything can happen. Wind. Kid. Dog. Ground hog avoiding bird of prey lol... Anything
it,s hard to do everything alone. more power to you. OMG, you're daughter is so cute
Such a good video. Perfect
Great job
awsome video!!
You do nice work.
Great video
This is great - thank you
Wow, they look great! Cute kiddos!
Thanks so much! 😊
Very nice
Well done
Looks good!! I plan on building me some here pretty soon!
Your door turned out great! My wife wants me to build a Barn door between my bedroom and Master Bath. This will be my first time building one. I been watching so many videos trying to decide the best but easy way to make one. I do like the fact that your door has the two frames on both side. How thick did your door turned out to be?
Suggest you assembly the door frame and then slide the plywood panels into the frame before installing the last rail.
Great job dad!
Nice!!!
GREAT video by the way! I’d love to do this but don’t have the tools. Circular saw is about all I have. The end of your video would be my WHOLE video 😂😂
Well done. I’m fairly handy, but your level of clean work is quite helpful. I’m hanging my doors today! Wish me luck
Good luck!
Great video...
Great work dad
Excellent workmanship. Great video demonstration. With respect to making the grooves for the door to slide on the bottom, I would suggest to groove them when you have cut your two vertical and one horizontal rails before you glue the panels, just saying. Hope that makes sense
nice job
Thank you . Your videos are awesome
Definitely cut the groove before assembling. But the absolute best part of this video is your daughter at the end😊❤
nice door
Nice video the ending was perfect because some jobs are not without an accident or two 👍🤣
Come to Miami! I wish I could do this
Great job. Love the wall color. If you don't mind what is that wall color?
I really love the idea!We are in the process of renovating and I wanted to incorporate that in our design but a pantry though. You think 4 ft deep × 7ft long enough for double barn door? Please advice, thank you!
Nice Tutorial, suggestion :
Cut the grooves before assembly, much easier to manage and handle, the ladder collapse could be avoided that way..
Hi nice video. Can you advise if the new Trim can be flush mounted to the jamb?
Or is it better to have a few mm offset reveal.
Why isn’t it normally ever done flush?
Is it so there’s a recess for the gap filler?
Great job 👏 👍
Very nicely done. What was the size of your top casing board?
ooooo nice video, following
i dont have a table saw. is there any way to cut the grooves with just a circular saw? would you recommend i buy a certain kreg jig product for that?
I have that same toolbox
As far as the groove on the bottom of the doors, why didn't you make them with the table saw when you were making the cuts for the panels?
I I'm going to do a barn door in that goes into my bathroom and we are going to use a regular door with no holes in it and hang it like a barn door
For the slot in the bottom of the door- lay door flat on bench and use a slot cutting bit in a router.
Hello. I thoroughly enjoyed your tutorial. My question to you is in your opinion do you think I could use the current sliding closet doors for a sliding barn door? The are those orange brownish hollow doors. Or, do you think I should use the doors as French doors, instead? I’m trying to keep costs down and use what I have. Thank you.
All you need is a wood shop and ten thousand dollars worth of woodworking tools at your fingertips and you should be able to salvage your free doors……1,2,3!
If you leave the door trim on it helps close the side gaps - works well. Good job tho ❤️👌🏽
Aye bro that lil ring door clip was too hard lol
GREAT VIDEO, DEMO AND SIMPLE BUT VITAL EXPLANATION. THANK YOU VERY MUCH !!!!!! QUESTION......DEPENDING ON WHAT SPACING IS REQUIRED ON THE TOP WHEN INSTALLING THE RAIL. LETS SAY IT CAN BE BETWEEN 1 3/8 -1 3/4 BUT THE THICKNESS OF THE DOOR IS ONLY 1 1/4 ....CAN YOU JUST RUN A BOARD ON THE TOP (BACKSIDE) WITH A THICKNESS THAT WOULD FALL IN THE REQUIRED RANGE. ??? THANK YOU AGAIN
That should work. Good luck!
Router works well
I was so surprised that the door didn't knock over the ladders ... then i saw the outtakes 🤣
Nice job, but you scared me on that tall ladder!
What kind of kreg jig is that?
Router with slot cutting bit
Couldn't you make a jig and use a router with a thin deep bit to do the bottom groove?
👏🏻👏🏻👏🏻👏🏻
ARE YOU PLANNING TO VISIT PUERTO RICO ANYTIME SOON?
Why didn’t you grove the bottom panel before assembling the door?
What type and size wood did you use for the edges?
Eric Baeza I was thinking the something. Looks like 1x6
2x lumber.
Use the table saw on your bottom board before you put it on the door frame. for the slot
I have not been able to source 2x6's that I can rip to 2 x 5's that don't have knots in them. I want a smooth surface when finished to match cabinets. I did find treated desk planks that didn't have knots in them. Do you think this would work? Anyone see any reason with using treated lumber? I plan on sanding, priming, and paining. I did notice that the lumber used in the video had knots, but after sanding they didn't seem to show.
Randy Wallace if you fill the knots and sand it smooth the knots will disappear. If you don’t fill the knots there is potential for bleed through if you plan on painting.
@@captaincane64 I am having that issue now. I'm getting some bleeding through. What are you using to fill in the knots?
Harold Behar Bondo it sets fast, dries hard, and sands well. After a few coats of paint you won’t even know it was Bondo there. Hope that helps.
CC64 great info. Like auto bondo? I’m definitely going to try that. Thanks again.
Harold Behar I use Bondo Wood Filler.
Uses a router to cut the groove and when you hang a American flag the stars are on the left ,not right. But great video.