GA01P GSM Alarm box for power failure alarm
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- GA01P is good designed gsm alarm box, one alarm input port and inside onboard battery for power failure alarm. Alarm beeper output.
GA01P es una caja de alarma gsm de buen diseño, un puerto de entrada de alarma y una batería interna integrada para alarma de falla de energía. Salida de alarma sonora
GA01P est un boîtier d'alarme gsm bien conçu, un port d'entrée d'alarme et une batterie interne intégrée pour l'alarme de panne de courant. Sortie d'alarme sonore
will this work with any GSM card ie an EtherSIM card (uses push notification and does not expire)
Verizon operates on CDMA. Will the GA01P work with Verizon network?
hello, can you tell me if it is possible to operate in closed contact, the alarm will be activated when it opens?
yes
Do you have a link for the battery pls?
Search 3.7v Rechargeable 802540 600mAh
I need the function in the opposite direction! If the cable is cut, it triggers the alarm! The device is in the boot and the cable goes round the bikes on the bike rack.
hi, i have this all functionality works as described except the most important one: it does not send the SMS when the power fails. it only sends sms when power returns. i changed to a different bigger Li-ion battery so the battery is not the problem. couldn't be that the firmware is corrupted? did sent an email to the email address on website but there was no reply
I have exactly the same problem, please let me know if you found a solution, thank you very much
I had it too. It was a low battery. It must have 600mAh
@@marlborowims hi i would like to ask, I already use gsm alphabet but when i put message that have number it didnt receive the message but for word it receive the message
@@muhammadnaqib7145 Hello. Try using an old push-button phone.
when you cut the power it doesn't send me sms signal even when it comes back please help me
What is the battery capacity?
if I understand correctly, my phone will send an sms on the number of the sim card installed in my GA09? but it does not work, I have an error 0
Text programming messages MUST be written in the GSM alphabet. Not UNICODE. Alternatively, use an old phone. For example, a push-button Nokia
@@marlborowimsI already check my phone, and it use gsm code but it just receive message that is alphabet such as RESET but for @#123456890 it cant receive. Hopefully u can help me
@@marlborowimshi i would like to ask, I already use the gsm alphabet but the message it can receive just RESET and when i message @#1234567890 it didnt receive the message. Hope u can help me
@@marlborowimshi i would like to ask, I already use gsm alphabet but when i put message that have number it didnt receive the message but for word it receive the message
@@niklutfil2361 Hello. Try using an old push-button phone.