You made it look pretty easy, but mine was around $50 ish.. and how they had the old trailer jack on..makes it where the new one doesn’t go in the same place. I also wish I had man muscles instead of Elderly girl power ..I’m an old lady without any real tools except for imagination determination and being a little pissed off.! Lol .. I appreciate your video. Thank you.!
Just installed one just like it from HF on the same kind of trailer as yours (carry on brand) It's an awesome trailer and now even more so with the addition of this jack.
Thank you, your video was so helpful I'm curious if you can add the double caster wheels to this jack? This swing arm fixes half my problems--lifting the trailer--but the single wheel still might sink.
So I'm moving and need to transport swing set and pull my pontoon boat. But I can't seem to pull the thing to lift up the wheel, is the truck too full?
I don't know about mulch but I had the trailer loaded up with 3 tool boxes completely full of tools. It was most certainly over the weight capacity of the trailer. And I had zero problems most cranking it up or down
The only thing I might suggest is trying to see if someone sells a smaller one there's really not much of a way to adjust it past the the lowest setting.
Sorry, I missed your question. It was part of a combo kit by Reese. www.tractorsupply.com/tsc/product/reese-towpower-tow-and-store-anti-theft-lock-kit?cm_vc=-10005
You made it look pretty easy, but mine was around $50 ish.. and how they had the old trailer jack on..makes it where the new one doesn’t go in the same place. I also wish I had man muscles instead of Elderly girl power ..I’m an old lady without any real tools except for imagination determination and being a little pissed off.! Lol .. I appreciate your video. Thank you.!
Why did you put the brackets on backwards not per instructions?
Just installed one just like it from HF on the same kind of trailer as yours (carry on brand) It's an awesome trailer and now even more so with the addition of this jack.
Every time I use the trailer I am stunned by how much more useful it is with that jack stand.
Thank you, your video was so helpful I'm curious if you can add the double caster wheels to this jack? This swing arm fixes half my problems--lifting the trailer--but the single wheel still might sink.
Good effort but keep the camera tied down or does it shake so much?
So I'm moving and need to transport swing set and pull my pontoon boat. But I can't seem to pull the thing to lift up the wheel, is the truck too full?
I'm going to try to install mine tomorrow on my hotdog cart! Wish me luck...signed A WOMAN😂
I replaced one in my boat trailer. I have the one with a grease fitting and I lube the bearing buddies and hitch every spring
What if the trailer tongue itself is too small for the wheel jack?
Like it's too short when the jack is swiveled up? Or that the bar is too small for the mounting bracket?
Red Beard and The Den of Tools the bar itself is too small for the mountain bracket
Hmm, can you send a pic?
What tools you use.. Size?
Not sure you should have to lift like that at the end.. doesnt seem right
6 years later... n here i am. Harbor Freight just had a sale on these 1k pound version.
Can you use the Jack stand with a full load of Mulch in the trailer? Will it hold?
I don't know about mulch but I had the trailer loaded up with 3 tool boxes completely full of tools. It was most certainly over the weight capacity of the trailer. And I had zero problems most cranking it up or down
@@denoftools Thanks.
mine won't fit the bottom bolt won't go through to the other side and if I go down to next hole the gap is almost an inch.Help!
The real issue is that the bottom bolts are up against the bottom of the trailer arm. The top bolts are there to clamp it down.
The pivot on my jack is frozen. Suggestion? I want to keep it and not replace mine.
First I'd try a penetrating oil. If that doesn't work a heat gun and then ice bath. Once you get it moving, strip it, clean it and try it again.
Love the cal guns! License plate cover🤟🏼🤟🏼🤟🏼🤟🏼🤟🏼🤟🏼🤟🏼🇺🇸
Wow, I forgot all about that. I live in a free state now and just can't imagine how bad it must be for one back there
Thanks for your comment. I figured out if I used a 3/8" bolt instead of the 10mm that the jack came with...it finally works. Yeppie!
I'd like to see your spare mount. my tires are 13"
I got this at Walmart, but this is too tall for my trailer. Any suggestions?
The only thing I might suggest is trying to see if someone sells a smaller one there's really not much of a way to adjust it past the the lowest setting.
where did you put spare and with what mount?
Right now I'm keeping the spare in the trailer itself I have not found a mount that I like then we'll work with the side walls on this trailer
@@denoftools thank you i may put ubolt up front on top rail just drill 2 holes i guess and stand it on tounge should work
where you get the drilled channels you ran u bolts thru
came with the jack
can you post a link to the padlock you have
Sorry, I missed your question. It was part of a combo kit by Reese. www.tractorsupply.com/tsc/product/reese-towpower-tow-and-store-anti-theft-lock-kit?cm_vc=-10005
Red Beard where you at ? Miss you and the bear.
Wheel jack is Best on market
85.00 here at Cambodian Tire in Kirklandlake Ont
Just got one from northern tool for $20! Super cool
Thank you I knew I was doing something wrong !
Thanks for the tip with power tools.....be careful :)
awesome vid brother ty
Looks like you put it on the wrong side also you put brackets on backwards.
hi
Had to give it a like.... CGer
30 seconds of content packed into a 5 min video ;-) :-(
Couldn't watch it....the fast forward made me nauseous
Useless information... You said or did nothing