You are so talented that those iPhones almost repairs itself from the moment they enter inside your shop. Congrats for all your work and to take your time to share it with us.
to be honest i am from Syria and you made me want to learn how to fix phones and soon gonna start learning advanced phone repair matter the fact tomorrow i will fix a broken phone that got a short on WiFi IC + Filter THANK YOU for making me believe that i can do this
Really glad you are back in the groove of things and making videos. I work at a phone repair shop; I always have enjoyed and appreciated them. Keep up the great work. Also I wonder if you follow the mobile repair Reddit or Discord?
Very delicate... well done ....your videos are very educational.... Am a commercial contractor... finished my aircraft mechanics and did my MCSE.. now I Micro-solder repair at home like you... any advise what should I do next lol 😂
When I got my silicone mat I couldn't reball chips any more, the spongyness makes my stencil warp. Now I put a paper towel under the chip to prevent that
Oh my Goodness! That was me! That was an iPhone I repaired in a haste and connected the display the wrong way (I know I know, totally embarrasing) So I really didnt give a damn eventually, removed the board and sent it to you, since you can't ship devices with batteries internationally and I was told sending the board was just fine. Sorry for not packaging it properly. Thank you for your great work. I know I sent it to the right person, I honestly do not believe anyone else here would've done with THAT much care.
I always wonder if someone sees the video of their own phone here. I am glad this one worked out. I've ran into a few more of these since this one so there are a lot of people who accidentally connect that cable backwards. I think it's because of the long cable with odd folds. Thank you for commenting. :)
@@ststele Yeah it is because of that, screw the design on that one. Besides being very educational, your excellent videos had me convinced where to send the smartphone to, so I'm really happy that my device made it to one ;)
Is the original home button working well after putting inside? Because I had one iPhone 7, home button stoped work after cutting button's ribbon flex. I have tried many other buttons and LCDs and still the same. No button detected. I remember that Jessa from iPad Rehab was asking about that issue at live streaming but no one was able to help. I have checked connector on the board on diode mode and readings were similar with healthy board. I should check voltage on working board? Do you have any clues Jason? Mamba, mesa? Thanks for time and help!
Smashing , that new inductor looks original, no one would ever know :-D Sometimes being too picky can create a problem. You would think i would learn... Nope lol.
Is that an old video? Your EasyDraw license end date is: 2019-03-28 😁 Today is September 16th, 2019. Anyways, as always a nice video. Thank you for that. Best regards Tolga
Nice video and fast repair. Wondering is any genuine reason you are not using some board holder ? On your movies logic board is moving in all direction :) . I don't mind just wondering . Keep up good work.
Thanks. I use a board holder most of the time these days. In this video, from the moment the filter is removed, the PCB went into a holder. I should have left the part in where I clamped it down.
At some point, Apple added a feature to iOS so that when the home button isn't behaving, it automatically turns on assistive touch. It seems to need a home button connected to do it tho.
@@ststele Sometimes that Assistive Touch Button doesn't appear. If you got a Home Button issue and the Soft Button doesn't appear, just switch off the iPhone. Then turn it on and when the Apple Logo appears, press and hold the Volume Down Button, until it booted up to the setup screen. The iPhone will skip the "Hello" screen and go straight to country selection ;) Just a tip of me :) Best regards! Tolga
Zi have an iPhone 7 with no image probably the same thing It really needs your attention but when I click the link for mail in it gives me an error. Help!
the only micro solder tech that "GENTLY" remove sticker and put it back nice and firm...luv it sir J
Great job, I appreciate the time you take to stream.
Love ur work!! Keep the uploads coming!!
You are so talented that those iPhones almost repairs itself from the moment they enter inside your shop. Congrats for all your work and to take your time to share it with us.
Lol, thanks! I wish it were true but there are a good handful that I don't fix. I do my best tho.
Excellent Colleague
Jason very good video! I glade see you again !
to be honest i am from Syria and you made me want to learn how to fix phones and soon gonna start learning advanced phone
repair matter the fact tomorrow i will fix a broken phone that got a short on WiFi IC + Filter THANK YOU for making me believe that i can do this
Thank you for another awesome video.
Thank you for this information and a nice explanation
Great Job
proud cellphonetechnician here from philippines
All about the meter skills. Good work.
Love to see ur working
great repair well done
Great job again like always
Thanks for the video 😀👍
Really glad you are back in the groove of things and making videos. I work at a phone repair shop; I always have enjoyed and appreciated them. Keep up the great work. Also I wonder if you follow the mobile repair Reddit or Discord?
Not yet :) I actually just created a Discord account today tho.
I like this quick repair videos. (:
Greetings from México.
What a great man to learn a lot
i really like your videos because you are genius .
I m happy because you make video and upload.
Nice video keep them coming
Nice work
Thank you very much
Very delicate... well done ....your videos are very educational.... Am a commercial contractor... finished my aircraft mechanics and did my MCSE.. now I Micro-solder repair at home like you... any advise what should I do next lol 😂
Sir I am subrata from india(kolkata) actually I am mad fan you and u,r videos.Thank u sir good bless u nd u,r family.
Mantap master .penyakit yang sama
Good job
well done
Very good man
Superb bro
you are awesome guy!!!
That’s good job I wish I can find you and learn from you
You have killed me with Louis Rossman would be proud of me :-)
louis rossman would be proud lmao good one!
Qué tipo de herramienta usa??? Muy buen video. Suerte DIOS TE BENDIGA.
Sir awsame work
Good work and awesome video as always! :)
Thanks man! I've been seeing some of your work on IG. Very impressive.
Thank you, I really appreciate!
Tnks
I like YOU SO MUCH THANK
When I got my silicone mat I couldn't reball chips any more, the spongyness makes my stencil warp. Now I put a paper towel under the chip to prevent that
Hey Jason. Where could we download some of the complete iPhone Schematics of the web like you are using besides ZXW ?
Jason is deep in the game wen you know the phone came from Germany and the customer had to make a choice to send it to him than to Ben.
Oh my Goodness! That was me! That was an iPhone I repaired in a haste and connected the display the wrong way (I know I know, totally embarrasing) So I really didnt give a damn eventually, removed the board and sent it to you, since you can't ship devices with batteries internationally and I was told sending the board was just fine. Sorry for not packaging it properly. Thank you for your great work. I know I sent it to the right person, I honestly do not believe anyone else here would've done with THAT much care.
I always wonder if someone sees the video of their own phone here. I am glad this one worked out. I've ran into a few more of these since this one so there are a lot of people who accidentally connect that cable backwards. I think it's because of the long cable with odd folds. Thank you for commenting. :)
@@ststele Yeah it is because of that, screw the design on that one. Besides being very educational, your excellent videos had me convinced where to send the smartphone to, so I'm really happy that my device made it to one ;)
Bon chance
BIG LIKE
hi jason..
do you use ethanol for clean up flux residu?
if u use, which one ? where i can buy
Is the original home button working well after putting inside?
Because I had one iPhone 7, home button stoped work after cutting button's ribbon flex.
I have tried many other buttons and LCDs and still the same. No button detected.
I remember that Jessa from iPad Rehab was asking about that issue at live streaming but no one was able to help.
I have checked connector on the board on diode mode and readings were similar with healthy board.
I should check voltage on working board?
Do you have any clues Jason? Mamba, mesa?
Thanks for time and help!
Smashing , that new inductor looks original, no one would ever know :-D
Sometimes being too picky can create a problem.
You would think i would learn... Nope lol.
Oh man, that's true. Nothing like nitpicking a tiny imperfection and jabbing the iron into a plastic connector while doing so!
It would be great if you would do a training course for beginners
Is that an old video? Your EasyDraw license end date is: 2019-03-28 😁 Today is September 16th, 2019.
Anyways, as always a nice video. Thank you for that.
Best regards
Tolga
How did you manage to make that camera to work with your camera I always have blurry edges and blue tint
idol
What temperature was your hot air station and the air speed to remove this filter?
Can you do video of s7 or s8 active repair
Would that be the same for water damaged no image ?
How do you know the voltage of each components? It’s not written on the schematic.
Nice video and fast repair. Wondering is any genuine reason you are not using some board holder ? On your movies logic board is moving in all direction :) . I don't mind just wondering . Keep up good work.
Thanks. I use a board holder most of the time these days. In this video, from the moment the filter is removed, the PCB went into a holder. I should have left the part in where I clamped it down.
Please please please run your iron tips at a lower temp
Which application do you see Sir
What’s is the reason to send that far for repair?
where can I buy that FL3906 ?
I need a micro scoop link where I can find it in America
Easy one eh Jason ! Got any gator stories yet?🐊
Lol, not yet. Myakka State Park is only 15 or 20 mins from me tho so not too far from thousands of Gators.
The people who develop those schematic packs must really like Japanese software.
(Easy Draw is a 2D CAD/EDA solution from ANDOR Corporation in Japan)
I changed filter still no graphics can u tell me which pics all for graphics
Still? Where can i find u to fix my I7 😢
😍😍😍
Gd job bro
How the AssistiveTouch button come on the screen ?
Thank u
At some point, Apple added a feature to iOS so that when the home button isn't behaving, it automatically turns on assistive touch. It seems to need a home button connected to do it tho.
@@ststele Sometimes that Assistive Touch Button doesn't appear. If you got a Home Button issue and the Soft Button doesn't appear, just switch off the iPhone. Then turn it on and when the Apple Logo appears, press and hold the Volume Down Button, until it booted up to the setup screen. The iPhone will skip the "Hello" screen and go straight to country selection ;) Just a tip of me :) Best regards! Tolga
Front camera 7plus does not work and everything was changed and did not work what solution
hi brother where I buy all ic, diod and capacitor so can you send me the address please ?.
Sir how much rupees in blower iron
was it the same shop that sent you the rehot cpu bro phone?
Different German :-)
🤙🏼
That's just s7 active disco mode.
Lol!!
@@ststele put some plastic under the amoled flex cable
How does someone plug a display in backwards?
I'm not sure how they are plugging the cable in backwards but it seems to be common.
Hello what tool using for schematic diagram ?
I use FlexBV from pldaniels.com, Easy Draw from unionrepair.com and ZXW from wherever I can buy or renew it when the time comes.
@@ststele which is best one for beginner ?
Maybe ZXW, but you will find similar info in all of those..
BTW: it’s Not Zero L its OPEN LOOP (0L)
Zi have an iPhone 7 with no image probably the same thing It really needs your attention but when I click the link for mail in it gives me an error. Help!
Hey, sorry for the trouble. Our database server had issues last night. It is fixed this morning though.
www.ststele.com/mail-in
I have a bent iPhone 7plus and have hit rock bottom, can I send my phone to you for data recovery?
It's best to contact us through our website. www.ststele.com/mail-in
You bend the lcd cable 2 much thats why home button dont work
Your phone hahaha omg I had no idea you'd feature that POS! #imdead
she loves my s7
Hey guys, better behave yourselves. Mrs STS is in da house :)
Translate to arabic you will help many people
And good luck 🖤
I just replace the sticker with capton tape
Power bottone. Lol
Good job