I don't understand the dislikes? OK many of us have better tools in our hobbyist workshops but they did a great job with what they had. The title might be a bit misleading as they replaced the muffler rather than fixing it. However, I’d wager the title was written in a second, third or even fourth language for the person who uploaded it. I say well done.
Dude!!! That’s what was bugging me since the beginning with all the brutal misplaced hammering :) thank god i m not the only one :) i laughed real hard when I saw your comment , thx.
а это чточно пакисатн? они ставят что то новое вместо того что бы разрезать и перемыть внутрянку тряпкой, складывается лёгкое ощущение что это постановочное видео, а в кадре актёры. а работа двигателя какая ровная, мммммм.....
There was a lot of unnecessary wasted labour and time this time! One cut and the old pipe would have slide inside the new tube and saved a load of labour and been stronger. great effort shown on finding a way around any problem though! Enjoyed the video as always!
Not stupid, they have been taught 1 way I'm sure... and a cutting head would had worked better, but great use of thinking to blast the slag with turning up the oxygen when the cherry gets hot! Way to go
I'm normally blown away with thes guys inguinity... not today.. gas torch to get nuts off at a push... and the truck still idols rougher than the soles of their feet
LOL. Guy uses welding tip instead of cutting torch. Beats new part into submission. Forces old pipe into new pipe that has the same Dimensions. Crap welds the two and bolts that mother up….Where was this, Missouri???
I enjoy the videos, but the constant marquee scrolling telling us to subscribe over and over is most annoying. It is a shame, I kind of would have like to see a bit more, but I will keep watching the other channels that show the same.
Stopped watching after about the 15th time the banner begged me to subscribe. When will people learn that you NEVER have to tell someone to subscribe? If people like the content they’ll subscribe!
কাজে অসাধারণ দক্ষ
Great video 👍
Some jobs just fight you all the way.
You sorted it, well done.
Excellent travail les gars...👍🏻
I don't understand the dislikes? OK many of us have better tools in our hobbyist workshops but they did a great job with what they had. The title might be a bit misleading as they replaced the muffler rather than fixing it. However, I’d wager the title was written in a second, third or even fourth language for the person who uploaded it. I say well done.
I didn't see a problem with the old one?looked like a waste of tax dollars to me... oh wait.... this wasnt in the states, my bad
...
Amazing skills of hammering :)
Dude!!! That’s what was bugging me since the beginning with all the brutal misplaced hammering :) thank god i m not the only one :) i laughed real hard when I saw your comment , thx.
It works so it must be good. Nicely done sir very nicely done indeed.
а это чточно пакисатн? они ставят что то новое вместо того что бы разрезать и перемыть внутрянку тряпкой, складывается лёгкое ощущение что это постановочное видео, а в кадре актёры.
а работа двигателя какая ровная, мммммм.....
Посмотрю видео,наберусь охоты и вперед в гараж,своё разбирать...
ماشاء الله تبارك الله... اللهم صل وسلم وبارك على نبينا محمد وعلى اله وصحبه.
Терпения хватило до того как начал по шпилькам молотком лупить 3:00, это не ремонт, это писец товарищи
Ручная работа всегда ценилась!
There was a lot of unnecessary wasted labour and time this time! One cut and the old pipe would have slide inside the new tube and saved a load of labour and been stronger. great effort shown on finding a way around any problem though! Enjoyed the video as always!
잘
보고
갑니다...^^
I need a guy like this to fix my muffler
Mashallah good work
Молодцы.
Пилил пилил, стучал стучал , потом взял и газом отрезал. 🤣
Хм ,надо поменять резанатор ,едем в Индию или Пакистан!
Как всегда эпично.
Waw keren banget
For the first time i was unimpresed by the workmanship showen here
говорят, ослиная моча на шпильки вместо WD не плохо идёт...
Вообще универсальная штука ! Я слышал в топливо добавляют ( рецепты Василия Алибабаевича ) !
Do they do anything in that country that’s not on the floor
Nope...
Только бы не начали самолёты ремонтировать.
Why not using the torch to cut the muffler pipe?
Because they are stupid.
Not stupid, they have been taught 1 way I'm sure... and a cutting head would had worked better, but great use of thinking to blast the slag with turning up the oxygen when the cherry gets hot! Way to go
I'm normally blown away with thes guys inguinity... not today.. gas torch to get nuts off at a push... and the truck still idols rougher than the soles of their feet
nice work
А болгаркой можно быстрее,и полуавтоматом заварить,но так не интересно.
نشدك ان من المغرب
3:30 у них же есть болгарки , зачем пилить ?
По старинке.
Эликтричества дорого стойт
Con la pulidora uviere cortado más rápido no crees
I wish I knew the address of these guys so I could send them some good mechanics gloves. Great fix by some great mechanics
Gloves?!! They don’t even have shoes!
LOL. Guy uses welding tip instead of cutting torch. Beats new part into submission. Forces old pipe into new pipe that has the same Dimensions. Crap welds the two and bolts that mother up….Where was this, Missouri???
It's a good thing that these guys aren't brain surgeons.
За кадром кто то работает балгаркой, а он руками пилит🤣🤣🤣🤣🤣
ручная работа оплачивается вдвойне
@@MrVovanli тоже заметил наверное он ещё не купил балгарки.😃
Слесарь с болгаркой это уже на уровень выше,cказали научись сразу пилить ножовкой.
I think ill stick with kwik fit
Историческая реконструкция ?! Ремонт паровоза в XIX веке ?
пусть чем-то занимаются, а то нестабильно к Индийском морю
представляете, у нас просто к токарю,сварщику не подойдёшь, везде охрана, надо пропуск
видимо,наши пленные с Афганской научили,прошу прощения
так то умело получается,на ремонте ,по дню ждёшь спеца,тут на улице,как сама в ларьке
самса имел в виду
This is pretty rough. Kind of the hammer then bigger hammer method of precision. I'm guessing there's no warranty.
He should have used a sleeve/ coupling
I kind of had to laugh because this is one of those jobs that every step is just hard and sucks. I hate this kind of stuff. He did a good job!
Pakai Gerinda kan enak to lek
Интересно а они лежа работать не пробовали(вечно на пятой точке)
а если бы был полуавтомат делов на 2 сек
I enjoy the videos, but the constant marquee scrolling telling us to subscribe over and over is most annoying.
It is a shame, I kind of would have like to see a bit more, but I will keep watching the other channels that show the same.
Oh Dear....
Next time heat the bolt up will a torch
Gerinda mana gerinda....?
Bengkel modal dengkul.
Yep! It's going to snap at the weld.
4 минута, нервы на пределе, тисков нет, турбинки нет, ума нет
странное решение , крепление глушителя жёстко к раме
Зачем надо было менять весь глушак, если на выходе отвод выхлопной заменить и все ?
видно же по видео что вся банка варенная и не раз
You need a 1\2 drive ratchet
Try to use penetrating oil to open stuk bolt more easily
В Пакистане половая жизнь
Customer work together. hahahaha
Greater Pakistan
Advance delivered the wrong muffler again, tired of getting the wrong parts all the time, doubles the repair time to make it fit.
Планета после атомной войны
Holy hell wtf are you doing 😳. Should have just cut it out in place under the truck. They took 3 time longer for a simple muffler replacement
Кандидатскую можно защищать по техпроцессу.
Run it without a muffler. Sounds meaner
Masakra dzisiaj nie do pomyślenia w Europie są sprzęty które można wykorzystać do takich prac
Резак был лишним, да отпили ты трубу в размер с фланцем .....
جمال
Their poor because they spend all their money on other things instead of buying proper tools and equipment. Very talented but wasted effort
O thang the thing co.nao tuoilo cho do ok k
Stopped watching after about the 15th time the banner begged me to subscribe. When will people learn that you NEVER have to tell someone to subscribe? If people like the content they’ll subscribe!
it is not fixing the silencer. it was changing
I wouldn't be able to get the nuts of without breaking them
👁️👁️👁️👁️
These guys don't even have a proper power saw or angle grinder.
Bhai
Har kaam haath sey jyada mat karna , machine ka istemal karo
Хрен знает. видео на 10 минут... Этот фланец можно отрезать болгаркой и приварить на новый глушак минут за 5..
That’s not fixing that’s called replacing. Clickbate much.
What they usually do if the end plates are ok is roll a piece of plate
around the outside and fully weld or
braze it in position.
No exactly Quick Fit are they more like artistic bodgers
Мазохисты
Bricolage 👎😂Et travaile assis 👎👎🙈
Такой инструмент как болгарка,видно до них не дошёл... А автогенная сварка,сжигает металл. Хрень какая то!
ррсмю ждет хуже этого
Bad workers with no skill