Hi there, hope you like the video! Next one is the GT Slipstream “Klunker” build 🤙 more info and links about the support in the description! Custom reflector from Neko Cycles, worldwide shipping! : instagram.com/nekocycles_ My Instagram: instagram.com/toastyrides/
There’s a possibility to do a slight heat treat on the bottom bend to stiffen it up and keep from springing too far or even bending the rod. Doesn’t have to be to knife heat treating specs, but heating the bend to red and dipping it in warm oil could help stiffen the rod for more support
I used to bend a lot of stainless tubing… and I must say you did an amazing job. Especially considering you bent solid rod without a bender. Excellent work!
This is perfect. I don't always need a big basket and sometimes the bag I'm carrying is just good enough, but still causes my back to sweat. This is a good thing for keeping my bag off me while I ride.
Good shedsperiment. Slow mo bag wobble was my favourite bit. Looks classy with the look of the bike. Will be genuinely interested to know if the attachments hold up as might give it a go. Keep the vids coming
Jumping on this one late, but a great vid, thanks. You could use some support struts to increase the weight limit/make carrying more weight less of an issue. I use a Carradice support for my Carradice long flap and found the 'bagman support struts' make carrying heavier loads much less of a concern.
Very similar to the Carradice supports, which cost almost as much as one of their bags. Great job. I was particularly interested in the common hardware you used to attach it to the seat rails. Perhaps 2 of them on each rail might be a more solid connection?
FIIIRRSTTTT!! Jks great vid ! Turned out great! Love the idea of bending it around a pipe to get the smooth bends. Also love the stainless look, will avoid rust too. Cheers!
haha, where did you get that green bag? In case you don't know it's and old Czechoslovak People's Army military bag usually called the "malá polní" (pretty common in central Europe and costs about 10 USD or even less :) It was unanimously hated throughout several generations of conscript soldiers for its bad straps and sloppy design.
This is a really interesting experiment. I understand that the Cr-mo mounts that Nitto/Carradice use are annealed after forming so that they don't deform again during use. This seems to be strong enough without that process and I wonder why that is. I look forward to a more long term review, but this looks really good!
Good tip, thank you! Don’t know if it would work through tight corners close to each other as it would have to feed through the tube? Might not be thinking about it right, though.
Hi there, Is there a reason you dont attach your bag onto the brooks saddle bag loops? I havent been able to find any documents talking about there weight limit but ive strapped a bunch of random stuff to mine. Just wondering if you know something i dont?
The bag SHOULD attach to the saddle's bag loops...these Carradice-style bag supports are meant to stop the bag bottom rubbing on the tire if you don't run a rear rack or stout fender. But his bag isn't a "bike bag" & so doesn't have the straps and buckles up top. They could be easily added: a wooden dowel runs the length of the bag under the hinge side of the top flap; straps of some adjustable kind go thru slots in the bag material, around the dowel, back out the same slot and thru the saddle loops. Buckles inside the bag, please - so cinching up the buckles pulls the dowel (and bag) snug against the saddle. This has been cycling practice for 100 years; I'd guess he'll tumble to it someday, and make another video. Cheers!
Really cool project! I’d be tempted to try making one too but because I’m so short the seatpost wouldn’t be long enough and it’d just rest on the rear wheel - will have to stick to normal racks lol What equipment or software do you use to produce your videos?
I glad the last 15 seconds were included as some of your other videos never showed the end result with the hole bike in frame even though the thumbnail did (clickbait) But your next video and sub button covered half the screen at the end lol
Hi there, hope you like the video! Next one is the GT Slipstream “Klunker” build 🤙 more info and links about the support in the description!
Custom reflector from Neko Cycles, worldwide shipping! : instagram.com/nekocycles_
My Instagram: instagram.com/toastyrides/
There’s a possibility to do a slight heat treat on the bottom bend to stiffen it up and keep from springing too far or even bending the rod. Doesn’t have to be to knife heat treating specs, but heating the bend to red and dipping it in warm oil could help stiffen the rod for more support
I used to bend a lot of stainless tubing… and I must say you did an amazing job. Especially considering you bent solid rod without a bender. Excellent work!
This is perfect. I don't always need a big basket and sometimes the bag I'm carrying is just good enough, but still causes my back to sweat. This is a good thing for keeping my bag off me while I ride.
Bending shapes like that can be a nightmare, great job 👍
Good shedsperiment. Slow mo bag wobble was my favourite bit. Looks classy with the look of the bike. Will be genuinely interested to know if the attachments hold up as might give it a go. Keep the vids coming
Nice job , I'm just doing something similar ; I"m thinking of fixing steadying bars from the bag rack to the seat drop outs .
Jumping on this one late, but a great vid, thanks. You could use some support struts to increase the weight limit/make carrying more weight less of an issue. I use a Carradice support for my Carradice long flap and found the 'bagman support struts' make carrying heavier loads much less of a concern.
Very similar to the Carradice supports, which cost almost as much as one of their bags. Great job. I was particularly interested in the common hardware you used to attach it to the seat rails. Perhaps 2 of them on each rail might be a more solid connection?
2 on each is a great idea
Great creation. Subscribed to the project, as I dig tinkering.
FIIIRRSTTTT!! Jks great vid ! Turned out great! Love the idea of bending it around a pipe to get the smooth bends. Also love the stainless look, will avoid rust too. Cheers!
Very cool. Love the bike colors also.
Could you use an old seat post clamp to attach it? Maybe file the rail grooves oval etc.
It would let you quick release it with a 6mm
Hot tip use a rubber mallet close to the vice for a clean round bend
haha, where did you get that green bag? In case you don't know it's and old Czechoslovak People's Army military bag usually called the "malá polní" (pretty common in central Europe and costs about 10 USD or even less :) It was unanimously hated throughout several generations of conscript soldiers for its bad straps and sloppy design.
Yes, but you can get 15mm g-hooks which make the bag actually usable. Those g-hooks cost more than the bag tho.
Amazing job 👏🏻👏🏻👏🏻👏🏻
Impressive load capacity !
This is a really interesting experiment. I understand that the Cr-mo mounts that Nitto/Carradice use are annealed after forming so that they don't deform again during use. This seems to be strong enough without that process and I wonder why that is. I look forward to a more long term review, but this looks really good!
The annealing makes them softer actually, less brittle to prevent fatigue cracking over time
I wondered about these supports. Don't they slowly bend towards your seatpost , even when loading not so much? Specially on rougher roads.
I want you to do it in the front handlebar, this video was very informative, thank you
This is amazing. Thank you!
You’re welcome, thanks for checking it out and glad you found it useful 🙌
Looks good and simple to make
Wow i love it. Thats nice
Drill a hole through the tube, hold tube vertically in vice, place bar through hole, wrap bar around tube, it works well that way
Good tip, thank you! Don’t know if it would work through tight corners close to each other as it would have to feed through the tube? Might not be thinking about it right, though.
That trek frame in the back is so cool, Do you going to make something with it? :)
what kind of bag is this? Like some military bag?
I'm looking for those mud guard...where can I find them?
Ha, you ordered it in from Blue Lug in all the way in Japan? Thats my Tokyo LBS!
Hi there, Is there a reason you dont attach your bag onto the brooks saddle bag loops? I havent been able to find any documents talking about there weight limit but ive strapped a bunch of random stuff to mine. Just wondering if you know something i dont?
The bag SHOULD attach to the saddle's bag loops...these Carradice-style bag supports are meant to stop the bag bottom rubbing on the tire if you don't run a rear rack or stout fender. But his bag isn't a "bike bag" & so doesn't have the straps and buckles up top. They could be easily added: a wooden dowel runs the length of the bag under the hinge side of the top flap; straps of some adjustable kind go thru slots in the bag material, around the dowel, back out the same slot and thru the saddle loops. Buckles inside the bag, please - so cinching up the buckles pulls the dowel (and bag) snug against the saddle. This has been cycling practice for 100 years; I'd guess he'll tumble to it someday, and make another video. Cheers!
Nice job!
Nice build but to add support use the two bolt things on the back and make two more post to it.
Thank you sooo mush!!! I’m made this one for myself and save over 50€ for another popular bag support from UK)))))
nice shot !!!
How tall are you? Just curious for a point of reference.
This is awesome
Really cool project! I’d be tempted to try making one too but because I’m so short the seatpost wouldn’t be long enough and it’d just rest on the rear wheel - will have to stick to normal racks lol
What equipment or software do you use to produce your videos?
I glad the last 15 seconds were included as some of your other videos never showed the end result with the hole bike in frame even though the thumbnail did (clickbait)
But your next video and sub button covered half the screen at the end lol
Really enjoy your vids and the style of bikes you build! I would love to become a customer/have you build a bike for me as I'm a KIWI as well
cool 😎
Tidy job. If i tried that it would look dogshit 😂