02 - 05 ford explorer blower motor /resister
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- If a MECH A NIC video helped you consider donating to my patreon account to help support the channel. / the_mech_a_nic
or my paypal
paypal.me/jona...
THE MECH A NIC’s amazon store ,here’s the tools I use
www.amazon.com...
THE MECH A NIC’s Instagram page
/ the_mech_a_nic
THE MECH A NIC’s facebook page
/ the-mech-a-nic-1356996...
Thank you for watching my video, I appreciate the support !
![เกิดใหม่ทั้งทีก็เป็นสไลม์ไปซะแล้ว ซีซั่น 3 - ตอนที่ 70 [ซับไทย]](http://i.ytimg.com/vi/IbBEqbse4Oo/mqdefault.jpg)
Woo! Just tried this now and it worked !
Part was around $30 but much cheaper than a mechanic.
Thanks so much for posting this video, appreciate you putting out useful content for us older Ford Explorers!
I have a 2003 XLT V6
Thank you for the step by step instructions, I was able to follow them and replace this part myself in under 20 minutes!
You're welcome.thanks for watching
Exactly the problem and fix I was looking for. Couldn’t be happier.
Glad the video helped you
Your video is great! Very linear thinking and narration. You didn't wander or entertain us amusing anecdotes. Just the facts man. Will try this fix, thanks!
Thank you 👍
Great job explaining and giving detail as to what to do and what tools are needed.
You're welcome
My 06 started doing this- thank you
Thanks alot, I was having the same exact issue and didnt know what it was. I just went and brought the resister and it works perfectly, thank you again!
Great informative video. It was pleasantly weird that the 8 mm wrench assembly sensed an impending task and was vibrating with anticipation before launching for the task at hand!
Nice touch Jedi. ..very nice
Thanks for the video. The fix was 100% accurate. Please note on 4x4s that you will need to remove the 4x4 Module to get access to the blower. You will also need the force to figure out how to remove the 4x4 Module.
Oh no
Excellent video and information, greetings from México.
Thank you! 👍
I have had my 05 Explorer since the 15th of Jan so this is great stuff to know thank you.
Thans for watching
Thank you for taking the time to make this video! Next stop Rockauto
Thank you! Overall this was easy to do. I spent some time pulling the part out of the socket though. I think next step for me is to replace the blower motor because it is still too loud specially when is on 3 and 4 speeds.
You're welcome, bad blower motors can definitely make a lot of noise
Just fixed on 2000 explorer. TY
Glad it helped you
Yep, had the same thing happen to a Jeep I once owed. Great shots of the resistor. Nice fix.
+wyattoneable thank you, I appreciate the comment.
Very straight forward and clear instructions. I dont even have this problem and i still watched it. Lol i had the blend door issue with my 2005 explorer. Thanks for the awesoke video!
Thank you ! I appreciate the comment
I have a 2008 Ford Explorer 4.0 4x4 I had to change that 3 times. I love the truck after a 150000 I had to change all 3 timing chains. The computer pcm went out. All 402 censors full tune up PGR valve EGR valve airplane mass sensor Just nickeled and dined me. I still have it I have no problems now
Nice and easy job. Do you think vehicle equipped with cabin air filters that never get changed cause this condition. Most i've seen are overheated and some melted.
STEVE ROB a clogged filter can cause this issue since the airflow is what cools off the resister. this explorer doesn't come with a filter..just plain old part failing I'm assuming.
Thank you for the video so helpfully
You're welcome
Bro just saved my pockets a lot of money
My 2005 Explorer blower works on setting 3 and 4. Could this be a bad resistor, or perhaps the climate control unit?
Probably a bad resistor
LOL... Thomas virus! Thank you for making it easy to spot this time! =)
+Thomas EXOVCDS decided to give you a break lol
Thank you
You're welcome
nice and super easy awesome
+DriveShaft Drew annoying problem, easy fix. Those are the best. Thanks for watching.
Good video gonna see if this is my problem tku
I’ll be doing this to my 03 Ranger. It has the exact same problem.
Good luck
This video was so informative and helpful.. also how do I change the air filter of the AC
Any chance you got the part number for the resistor ? thanks great tutorial btw 😎
Sorry I don't. It's a pretty easy part to find in your local auto parts store or online
Wow dude! Didn’t know I had the force
Lol you got it! 👍😂
Had the same thing happen to my 2010, it was an easy job to do.
Nice.thanks for watching
I have 98 ford explorer sport. Could this be the reason no fan settings 1-4 work? Also no ac and control what vent air will flow through
Awesome video man! Will it be the same for the 2010 model? Didn't find a vid on it unfortunately.
Thank u:)
You're welcome
Good video !
+N Smith thank you, thanks for watching.
Hey man, mine was doing the same thing, it was only blowing on 4, but now it’s not working at all.. do you think it’s the same problem?
How did you press the tab?
Wish to make a video for Ford explorer 2004 about ac evaporator change
I changed with new one but after couple of month usage new one gone bad.
Dealer said need to replace motor too.
Hey can you show me how to replace a new water pump on a 03 explorer
Great video, thanks. I'm having the same issue on my 2008 Explorer, hopefully I can fix the problem so I don't have to bring it to the dealerripoff. I also have this issue that you might or not experienced. When I turn the car on, the interior lights come on and stay on, or I might drive over a street bump, or pot hole, and again, the interior lights turn on. This is very annoying, especially driving at night, and I have to turn the vehicle on and off (not driving of course), just to turn it off. Anyway, hope you can help. thanks.
Check the door switches. When they start to go bad it can cause interior lights to go on n off while hitting bumps during driving
On my switch only #2 speed quit working. Must be in the switch itself
on sport track is the same ubication?
This is not a 2005 Ford Escape. The bolts on the 2005 are near impossible to get to. Good Luck. You'll need it.
You're right , that's why the video says explorer not escape...
Should i disconnect the battery for this?
You don't need to
@@themechanic6117 awesome thanks 👌
What is the replacement part called? I want to look it up online. Good job!
Brittany Gumm blower motor resister. Thanks for watching
In your opinion if 1/2/4 work fine but 3 is the same as 2 ( so that means there is no change when I hit the 3 setting). Would it still be this part? I hate using 4 because it is so loud. I wish the 3 setting worked because 2 is too slow.
+Brittany Gumm sounds like it could be the resistor. Replacing it is cheaper than paying a shop to diagnose it. It's either the resistor or the switch to change the speeds.
Thank you for all your help. That did it. This is the second issue your videos have helped me solve.
Brittany Gumm glad to hear, you saved a bunch of money doing it yourself. Thanks for watching
I have a 1996 really love it. I don’t get any air, but if I hit a bump while driving I get air magically.
What can be causing this in and out air flow?
Check the electrical connector that goes to the blower motor and blower motor resistor. If the plastic looks burned or melted replace the parts. It could also be a bad blower motor
Thank you, for the quick response. I already replaced the motor resistor didn’t replace the connector.
I did tested the air blower with car battery and it did work, I will try to replace the connector.
Bad blower motor can still work and intermittently stop working until you hit it or hit a bump while driving.
@@themechanic6117
Excellent advice, much respect for the information given. one can go crazy changing parts and not getting no were.
My air works but theres a knocking in the dash board could u show me how to replace the blower motor?
If theres knocking its not the blower motor its the blend door actuator
Hi Farrah!!! Did you fix your problem? Is your AC working?? I'm having some issues with the heater no hot air. Have a nice day and a happy New Year . Greetings from Tucson Arizona 🌵🌞🌵
Did you remove the cabling from the battery beforehand?
No. Why would you?
@@themechanic6117 Some people say to remove the negative at least before you do any work. I didnt think you had to so i was curious if you did.
Its not necessary for this type of work
Do you have 4 blower I have none checked relay and fuses no blower replaced blower motor still nothing
What about the blower resistor?
@@themechanic6117 the resistor checked out fine.
Time to get a wiring diagram and start testing things. Its cheaper than throwing parts at the car.or pay a shop to fix it since you tried changing parts
Thor!... you can fix cars
No pues en ingles no entiendo alguien que lo tradusca?