AIR BAG LIGHT IS GONE... UPDATE
ฝัง
- เผยแพร่เมื่อ 10 ก.ค. 2024
- how to remove air bag light from dash after installing racing seats in a 2017 wrx
18x9.5 +38 offset Gold Rota Grids
Hankook Ventus V12 Evo 2
Car: 2017 Subaru WRX Stage 2 MAPerformace with Invidia R400
Lowered On Fortune Auto 500 Coilovers
Battle Aero Duckbill spoiler
Subscribe to my 2nd TH-cam Channel: New Videos Coming Soon!
StreetBANGERS: / @streetbangers2461
Instagram:
Follow Me @ WRXnRYAN
Purchase Shirts :
shop.spreadshirt.com/RandomRi...
Amazon Links To Mods:
3.3 ohm resistor: amzn.to/2UO3wlA
Iron Remover Spray: amzn.to/2HwJBkN
Perrin Sump Restrictor: amzn.to/2O5M04K
IKON Front Lip: amzn.to/2yLc2bg
Fumoto Oil Drain Valve: amzn.to/2KnO5rU
Fumoto Oil Drain Clip: amzn.to/2KrMjFW
Rotella 5W40 Oil: amzn.to/2KkICC2
Invidia R400 Exhaust: amzn.to/2G2mNbm
Mishimoto Intake: amzn.to/2HHQJH5
EGR DELETE: amzn.to/2HImUq7
TVG Delete: amzn.to/2pj01mm
Boomba Short Shifter: amzn.to/2GC8yrD
Boomba Shifter Plate: amzn.to/2IuXQUq
Perrin Shifter Stop and Bushing: amzn.to/2IAbaXW
Carbon Fiber Front Lip: amzn.to/2IxhAH7
Perrin License Plate Delete: amzn.to/2FPqgqE
Rear Spats: amzn.to/2pkau0P
BC Coilovers: amzn.to/2tYG2hi
Boomba BPV/ BOV: amzn.to/2pkay0z
Roof Vortex Generator: amzn.to/2pku5Op
Side Skirts: amzn.to/2pmGhOo
Mud Guards: amzn.to/2pmGjWw
Yellow Fog Tint: amzn.to/2HMuuo5
Smoked Headlight Tint: amzn.to/2JRXIhL
please like and subscribe - ยานยนต์และพาหนะ
![[안방1열 직캠4K] 베이비몬스터 치키타 'FOREVER' (BABYMONSTER CHIQUITA FanCam) @SBS Inkigayo 2404707](http://i.ytimg.com/vi/Tn3bGHiBWkg/mqdefault.jpg)
Mate just wanted to say this video saved my ass. Picked up a XR6T with aftermarket seats and airbag lights on, was pretty close to buying new seats to get a road worthy to put it in my name. This vid saved me a couple hundred cheers for that you earned my sub.
Thanks for the video! It helped shut my air bag light off after my braum seat install.
Hey Ryan which are the two plugs under the driver seat do these go into. You show the passenger side with the two center ones plugged in. Also do we disconnect the battery before doing this
Hey man anything you tell me that will help with the sliders? I havent put em in yet but idk how thats gonna work im tryna find every video i can that will help
I have a 2009 SL600, looking to put in racing seats because my stock seats weight 120lbs each. How do you know what ohm resistors you need, there is absolutely no information on my car on the internet. Having a hard time finding the right resistor to do this mod.
I pulled up driver seat for amp installation under the seat. When i put it back. Airbag light on all time. Is there a way to reset it? My obd won't do it neither battery removal.
I like how that exhaust sounds.
I used the exact same registers. Didn't work for me
Was it necessary to remove that passenger weight sensor? Or could we just put a 3.3 in it?
Hello! Is it work with 2008 GR STI ? Hatchback
Do you need the occupany sensor in and the resistors? My seats I just got are carbon fiber and it prob wouldn’t sense anything
I’m wondering the same thing!!! 😅 I’ve only swapped out my driver seat so far. 😅 do not want to pull that sensor pad out. I’m thinking the resistors will eliminate all the lights
If i disconnected the passenger dash board does it work
@ryans random ridez were all of your airbags disabled because that airbag light was on? I installed a quick release in my wrx and the airbag light is on. Does this mean that my airbags are disabled? There’s a resistor mod for that as well would that enable all my airbags once i do the resistor mod? Thanks
The air bags were disabled because it needs to have the occupancy sensor installed and resistors. If you do that they will work.
Can you help me with my WRX? I live in Indiana
👍
This is late but just watching now thinking of switching seats but just so you know they don't look identical the colored rings that are different represent different numbers there's a standard code you can look up 3.3kohm is just 3300000 ohm instead of 3.3 ohm
Does the occupancy sensor work as its supposed to? Or is it still on all the time
It's on at all times. But having them on at all times is better than not having them at all
I think you plugged the sensor in to the wrong yellow wire I think it would go off if you switched the Resistor and though why are you plugged in and it would be just on and off
@@RyansRandomActs sorry to bring up an old vid, but if the occupancy sensor was always reading present, then wouldn't you have a seat belt warning alert constantly?
Are you sure it's not stuck in a passenger not present status? If that's the case, you won't get a seatbelt chime alarm if a passenger is on it with no seatbelt (which is a good way to test it).
If the above is true, then your passenger airbags would never go off, even with a buckled in passenger present.
The purpose of the passenger occupancy sensor is to first ensure seat belt compliance, and second to trigger or hold off on firing all passenger facing airbags (to limit potential repair costs).
will this work on 05 sti seats ??
I'm not sure . Sorry.
Does this have any affect on the entirety of the airbag system, or just the seats bag?
All air bags work now with this and the occupancy sensor installed beside there are no side air bags in new seats. Which is why I had to put in resistors
@@RyansRandomActs is the occupancy sensor only for the passenger? I assume because there will always be somebody on the driver seat lol
@@flatmotion1 correct
@@RyansRandomActs thx for your answer. What was the turning point for you not getting a seat with airbag? probably price I guess. I am currently contemplating whether I should get the recaro sportster CS with or without airbag. It only comes with vag/vw plugs so I'd have to splice airbag wires and I'm not really too excited about that and thinking of saving the 350$ airbag price tag
Once the airbag light goes out, will the airbag work in an emergency?
not sure about the WRX but i did this in my 2010 RT Challenger and when I hit a tree at 50 mph the airbags did not deploy. Thank god for Sparco seats and harness.
No, this disables the airbags and bypasses the fact that they're not working to give you the indication that they're fine.
Have you done one for a seatbelt chime?
You have to click the seat belt button about 20 times fast and it should work
Do u think a 2.2 ohms can work??
Anyone put in a remote starter and have had airbag light come on?
Can I have the link
I bought these resistors and they did not work for me
Any fix since then?
You have to flip it the other way. The resistor colored bands show which way to install. If it didn’t work flip the other way.
Hand over the cam at the end is considered rude I would not do it to a person and that is what it simulates. Just saying...