Custom built RZR type 1000cc 4x4 DIY buggy project, 4wheelsteering, 2seater part1
ฝัง
- เผยแพร่เมื่อ 2 มี.ค. 2018
- This is my new buggy project 2018
RZR type 4x4 DIY project
Longtravel & mechanic locker diff
32" superatv intimidator tires
1000cc GSXR 2008 185hp engine
Volvo m45 gearbox
Heavyduty rack&pinion and rear electric steering system
Fox air shocks 16" / 14" travel
Sparco seats, steeringwheel, belts etc..
Home made designed - ยานยนต์และพาหนะ
![Turning Chinese go-kart To SXS [Full Timelapse]](http://i.ytimg.com/vi/x6sTXJ1RhsM/mqdefault.jpg)
![Turning Chinese go-kart To SXS [Full Timelapse]](/img/tr.png)
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
I don't think people could even grasp the level of design, engineering, and fabrication that it would take to pull off what you have done. My family builds stream liners to run Bonneville. We do not just wing it. Everything is thought through right down to bolt placement. This is on point, man. Great job.
Somebody has some serious fabrication and engineering skills.
Thank you! i am not a metalman or engineer just a hobby :)
Better than Polaris
mika isopahkala think you would be able to fabricate a rear end for a buggy ? I don't have this particular set of skills bu I work hard, i would definitely pay good money it
@@tylerproud7526 get one off an atv golf cart or small car ?
I’ve gotten one now, think I found a decent off a predator 525 it’s abc for future use everyone, they have cv axles are setup for its and chain drive rear end
The air suspension and rear steering setup is slick. Well the whole build is awesome. Excellent work.
Man yeah that’s awesome your a heck of a fabricator!!!! Very talented!!!
👍👏 My hat goes off to you i hope all the hours/weeks/months of planning and prep work give you years of enjoyment, awesome work!
Pland.. Perfect.. Interested.. Un compromised.. Un shakabul.. Meticulous.. Cold blooded job.. 😉👌👍👏👏
I am currently building a 3 cylinder 2 stroke powered 2wd 2 seat custom buggy using front and rear long travel suspension modules from a VW sand rail and a upsized KJ racing rear diff. im getting close to the first fire of the brand new ported mach z 800 engine and i must say im glad i didnt make it quite as involved as your buggy, props to you youve got alot invested and had do some serious figuring lol. i love it. mine should have about the same hp too.
Is that a snowmobile engine?
@@User-bb3ke yes, a 2000 skidoo mach z
Wow awsome! Impressive engineering. I would enjoy watching a driving video of performance. This is a great video of all fabrication .
You sir are a genius 👍😎👍
This this looks awesome! Subscribed!
Awesome!
I'am sure that you can build these for a living 👍
Beautiful thought thru seriously piece of engieneering right there!
And a Good way to get use for a old Volvo m45 gearbox 👏
Cheers from northern Sweden 🍻
Thanks! Volvo m45 gearbox is very suitable!
Outstanding job my friend just outstanding!! I want the same buggy with only 1 change I want a 4 seater to take my grandkids with me on long trips on the Rubicon
Awesome build!
Dude this thing is sinister lol what a build
Wow great job ....cool buggy 💪💪💪
Very nice job sir well done!
Nice work man 👍
Wow.....dude your are talented....fab skills are on the next level
Thanks a lot! I'm just a hobbyist :)
Crank it up, I want to see it run👍🏻
Very cool build
This guy is on my team during the apocalypse
I love where we are in the world today that someone can build this in their garage with a C&C machine, welder and pipe bender.
Donovan Creamer CNC*
17Industries sorry. Autocorrect lol
Wow your camber game is on point great job. You must have an engeinering background
I know right, that travel is mad
Yeah you're a straight badass dude
That thing is badass!!!😎🤟🏼
Thanks a lot!!
I was hoping to see it up and running!!
You should be proud of yourself as I’m sure you are! Because that’s one hell of a bragging right.
Thanks a lot:)
Awesome! 👍
Грамотный аппарат!
There is a lot of people without simple minds, in this world!!!
Make a miniture samurai out of it😎🤘it almost pretty much looks like a samurai from the side
Every time I start to think I have some great home fabrication and engineering skills, I find something like this and can only grovel because I'm not worthy! Haha sheesh man, you are friggen brilliant! Are you sure you're not an alien?
Mantap bang...😊👍
Sick music brah
I am very interested in the files and a parts list so I can build my own. Hell I’ll even sign an agreement saying I can’t sell it. I just want to build one for myself!
Top parabéns pelo projeto, tenho um Kart Cross motor de Honda 125
This is amazing machine.👍👍👍
I likes the buggys.
I want to bild same machine, but
I am 14 years old.😄
Don't let it stop you. Reach out to people who are willing to teach you. The entire world is literally at your hands
Bad ass build
This is my dream:)
FK'NG AWESOME!
Excelente 🇩🇴🇩🇴🌎
Getting Ultra4 vibes from this
That thing is awesome! Ever thought selling pre fabbed weld it yourself buggys? man too awesome!!
Thanks a lot! This is just a hobby for me :) I sell this when I build a new one.
@@isopah86 are you willing to sell the plans?
Did you sell this
AWESOME!
We are waiting for the continuation of the project
wow is amazing
Thanks!
bad ass build, im very impressd. what kind of program are you using to design laser cut parts and whole buggy?
Nice build! You would like to see my homemade 1/5 49cc RC car!!!
Que bonito prorecto
Mantap bang saya juga lagi bikin go kart 😁👍🙏
Your wench Box in the back looks like Mr. Fusion. You should get a sticker that says that on it.
Interesting build, what do you do with the transmission on the engine? I’m assuming your running the second transmission as it gives you reverse...is that all it does and the engine transmission does the rest?
Just an idea, for next build to just take a lada niva gear and transferbox, reverse the rotation of the driveshaft and throw it in there? Cool build tho morjensta Virosta.
Teach us your ways
Hola buenas noches . Quería saber que tiempo se tardó en construir gracias saludos desde Venezuela 🇻🇪.
Awsome
Hi, can I use part of your video to my compilation homemade inventions and projects ?
What is the purpose of the gearbox between the engine and the front differential?
666 views. Rock on.
Did you have to flip the front diff upside-down to get the rotation correct, or was it a front differential?
Really nice build!! What is the gearbox you used? Which application is-it from?
I wanted to put a Honda motor in one but if a gsxr is enough power then I look at different options
Surely so many people asked after the plans and I dont see a link here. I only saw one drawing on the video of what was possibly the articulation geometry. Did you actually draw the full buggy before you started? or needed to go back at the end to draw where all the bolts etc were placed after you worked it out in build and never got around to doing the drawings? Its seems with the water/laser jet cut plates youy must have had files for those from the start so knew the dimensions of the frame? Im not so interested in the 4w steer system but I would like to be able to turn out these buggies given the current cost of SXS in my country.
Have any measurements? Started to build my own but some measurement wouldn’t make it a hell of a lot easier
Can I get a set of plans?
about how much to build one
Top top top
What gear ratio did the URS4 differentials have?
Would you have set of plans and instructions for this project?
If they do I want them
Where did you get the differential from? What is it out of
Do you have blue prints and materials list for the rolling chassis for sale?
I know this video is old but what kinda transmission are you running in your side by side?
hey mika would you happen to have a build sheet or a pdf file of your build I would love to make one also please and thank you
What size welder did you use?
Did you just built the whole thing or did you have a plan?
where is the other buggy 900cc 4x4
Where did you bought your pieces?
good afternoon, can you send some sketches with measurements from this buggy, if you have them, please, thank you.
Do you sell the cad files for all the brackets ? If so how much ? Would luv to build one of these brusisers…..
Hi very good work .can you sells The plan ??
👍
Can you teach me your skills ? I’m about to graduate from high school, I’d love to become a welder.
What size tube did you use
Có bán combo tất cả không nhỉ
Okay this is epic but how much did you spend on it? Be true tho
I suppose if you had the time and nothing else to do and had a pile of parts and steel laying around this might be worth-while. But the cost to the average guy would probably border just buying a new RZR XP and that's not even taking labor into account. Cool build though...but I would personally pass on the rear steer. With a chain drive like that I would think it would be unstable at speed, and a chassis this small really doesn't need it IMO.
Maybe I have too little time because I'd like to make a new one :) This car might cost about 5x less than my preferred Polaris general. Thanks!
@@isopah86 hell yeah. And this is way better than a polaris. Nice work man. I'm planning on starting a fab shop soon and plan on building some buggies. Hopefully within the next year or so. Did you make any plans for this build? If so, I'd be interested in buying a copy.
This beats Polaris hands down
@@isopah86 If you're saying that you can build this for ~$3k (1/5 of a General), then I would suggest you start mass producing them 'cause you'll make a fortune. I'd still like to see this thing running rough terrain at 70mph. It's a cool buggy for sure and probably better than a RZR for crawling, but that's where it ends.
Do you no @Tim Cameron he rock crawls
Harrison Bentley yes I know
So in the end was it cheaper than buying a rzr and doing some mods?
This was much cheaper for me :) I would like to buy Polaris general but it costs about 28000e in Finland.
Tem o projeto pra passar ou vende????????
What diff did you use?
Does anybody know the name on the jigs that we’re used
Are you using 2 rear diffs and if so did you have to flip the from one upside down? Also are the axles from the same car?
Thats what you want... front diff driven backward, it's backward in the frame.
Do you have the g-code for cutting those parts? And want to sell them? Lmk
If you would’ve used a goldwing motor with factory reverse you could’ve saved a lot of time and money and engineering.
Which material it's chassis made of
How much kilometers speed and one time fully fuel how much kilometers running
Budget has left the chat.
this has cost me about € 6,000. I can do the next video with information about the price.
@@isopah86 cool that would be great thanks
Watched a couple of this guys videos. Awesome builds, great fabrication, gay ass music.
Did you came here for the music?
GTFO plz
Did you build that lawn mower in the garage too?
I didn't build it :) it is bought.
Can u build a single seater for someone
Mitchell Gilliam th-cam.com/video/1V0aJPWkleQ/w-d-xo.html
Wouldn't this spin the transmission backwards and force you to use the reverse gear to move forward? Excuse my ignorance but i am thinking about using this setup but i don't want to go down this road only to find out you had some special gearbox that was built to be driven in reverse or something.
if that happens with your setup you can swap the engine to the front to reverse the rotation. the seats a little to the back and all...
but is best to use it in the transversal alingment, bad oil distribuition can f**k all the engine up, so... =/
I use volvo M45 gearbox and works fine! I have used in the previous buggy of the same transmission.
Use a Polaris atv transmission and rear axle. Way easier and already built to do the job. Also, with a Polaris atv transmission you can run any snowmobile engine of your choice to it. No shifting, except forward high & low, neutral, and reverse. Way more power and much simpler design.
@@tarrynshorts3646 I Don't Know About More Power? GSXR1000 Producing 185 Horsepower!! Most Skis Are Pretty Expensive and you can find Rockets Cheap and Super Cheap If They Are Wrecked! But, It's All About Preference. Polaris Gear Boxes&Diffs Are Not Built Well Enough To Handle This Kind of power. I Should Know Because I Am A FRANCHISED DEALER! 🤔
Sincerely:Stephens Motorsports Family
good morning friend greetings i am from venezuela you sell those vehicles q manufactures the 1000cc more or less how many dollars I spend to build it