Digitech Trio Plus Tips And Tricks | USING MULTI EFFECTS
ฝัง
- เผยแพร่เมื่อ 28 พ.ค. 2024
- Digitech Trio Plus Tips And Tricks. In this video, I'll show you how to connect the NuX MG-300 to the FX Loop of the DigiTech TRIO Plus. One of my YT Subscribers specifically requested some help with this, so I figured why not? It's a simple connection but makes for some great results when teaching the TRIO song parts. Next time we'll get more complicated by using the HeadRush.
0:00 Intro
0:22 Overview
1:01 Making Connections
3:05 Outputs
3:34 Demo
5:35 Outputs Again
7:37 Conclusion
#thepedalguy #nuxefx #digitechfx
Facebook: bit.ly/30uRrnS
Instagram: bit.ly/3f97KuD
Twitter: bit.ly/3fcRTeo - เพลง
![TREASURE - 'KING KONG' COMEBACK SPECIAL [THE TREASURE SHOW]](http://i.ytimg.com/vi/Jx1wyMaQzf0/mqdefault.jpg)
Good vid. I've never had a go at using the effects loop in the Trio, should try it. Sounded pretty good.
It’s a great and under used feature.
Personally I am very interested in this set, using the Trio + with the Boss ME25 multi effects unit. Thanks for your Great videos, I'd be lost without them.
My pleasure!
this is really helpful. I have both pedals plus a Digitech Drop. I have the Trio+ running thru the loop on back of the amp & the NUX300 & Drop running from the amp front input. I often switch between combo rear/front & studio direct mode. but Im gonna try it this way as soon as I figure out where to put the Drop.
Cool. Let us know how it goes.
Thanks for the great tutorials. I'm attempting to connect the MG-30 with a Trio Plus, but no luck. I've tried every combination of fx loop on both devices, moved the send/return to before and after the amp, and tried to simulate the connections of the MG-30 the way you did here with the MG-300...nada for anything. I'd be eternally grateful if you could explain how to make the Trio Plus connect with the MG-30...there must be some way!
Yes. You should be able to do it with the send/return
@@ThePedalGuy Tried everything with S/R on the MG30...no go. *BUT* if I make the Trio+ the "primary" source and then use its FX send to the input of the M30 and take the output of the MG30 into the FX return of the Trio+ it seems to work (amp out from the Trio+ to an Orange Micro Dark head). No use of the S/R of the MG30 at all. I must say that for as fine a pice of hardware/software the MG30 is, the documentation is frankly abysmal...thank you for your channel. I don't know how I'd figure out how to use this otherwise.
Love it! Thanks for your help. I have vids of my digitech band creator on my channel. I’m still learning how to use it.
Happy to help
This guy is amazing
Thank you!
Hi good demo
Thanks.
Your videos are great. I come here for all my Trio+ learning. Would you consider improving your wash lighting and throwing some acoustic treatment up to improve your audio? Would cost less than $200 and would up your game so, so much. You’re just shy of a totally pro presentation and frankly you deserve that edge. It would make your show infinitely more watchable and even better than it is with current lighting and audio quality - which would be a real gem. Thank you for your tutorials - their content is top of the line.
Thanks Randall. I appreciate the feedback and kind words.
@@ThePedalGuy Your channel is PHENOMENAL!
@@randallnielson2011 thank you so much 😊
Hi Pedal Guy. Really enjoying your videos on the Trio Plus. When you’re doing the Line 6 stuff could you include a Pod 2.0 when linked to the Trio plus? I have an old Pod lying around and would like to find the best way to wire it up and get the best out of it. Thanks again.
Thanks for the suggestion. I’ll see what I can do
Great video....I wonder can you touch on using the Trio Plus with an HX Stomp please?...many thanks to you for your videos. I'm a beginner guitarist, and love that you address common ussues for us guys starting out with this great gear.
Hi. Don’t have the line6 products in here yet but that’s going to happen soon. I will be sure to cover this combination soon.
@@ThePedalGuy Hello Sir, many thanks for your reply....I look forward to your tips on using the HX Stomp...with so many connection options with these modellers, it's hard to know which one will suit ones own particular situation. :)
Thanks!!
You bet
Hello Pedal Guy! Great video! Thinking of going and picking up a TRIO +. Sounds like it would be possible to connect this to my HX Effects and have the output directed to an Audio interface where the drums and bass would be seperate from my TUBE AMP 4X12 Setup. Is that true that you can have the output(Drum and bass) go to say my studio monitors and not through the 4X12? Thanks great video!
Great video! Thanks for making it. I wonder if you have any suggestions about how I could connect the MG-300 to the NUX loop core deluxe (preferably while keeping the stereo output of the MG-300. I notice that that Loop core deluxe is mono.) I’ll be connecting to a Roland Cube street amp. I can use the Aux in on the amp. Cheers!
Unfortunately as the Loop Core Dlx is mono there’s no way to keep it in the stereo field. Simplest connection would be from the mg300 to the loop core to the amp. That’s about as simple a connection as it gets.
@@ThePedalGuy Cheers! I tried that today. It still sounds pretty good. By the way, on another topic, would you say I could connect the NUX stageman floor to the Cube Street via the aux in? Unlike the MG300 it doesn't have any amp simulation, but it does have a pre-amp. And, if i can do that, would it be better to go from the 1/4inch output of the Stageman floor to the aux input of the cube street, or should I go from the 1/8 inch headphone output of the Stageman floor to the aux input of the cube street? Thanks again!
Did you test the sound with/without the trio+? I'm saying this because the headphones output from the trio has cab-emulation (4x12 I think), don't know if it affects the sound in comparison to the sound that comes out of the Nux...Thank you!
Hey, great video! I am using it with the helix lt and I am wondering if the trio+ does apply a cab sim to the amp out. Right now I am sending my helix path (complete with amp, cab and effects) to the loop in the trio and the return the amp out to the path in the helix and on the second return the mixer out, so I got everything on one signal path, this goes out from the helix to my studio monitors. However, it does colour my sound I think. So if the amp out also uses a cab sim, I would have to cab sims active. Is there a way to prevent this? or is there a better way to run things?
The amp out does not include a cab sim on it. That would be the headphone out
@@ThePedalGuy ok, thx! somehow my preset seems to sound different now, but maybe it's just ear fatigue. or the patch cables suck tone...
is the fx send/ return of the Trio stereo capable via TRS insert cables?i Noticed you used mono cables when hooking up the NUX fx.
It's mono
Thanks. I have a katana 50 mk 1, so no effects loop capability. I can purchase a used boss gt8. Would i simply connect the trio plus send/ return to the gt8 send/return with guitar plugged into trio? And just shut off all effects on the katana, I assume, to give me full looper capabilities? Much appreciated! Mike
I think that will work. I'm not familiar with the GT8, so I'm not 100% sure.
Great video, I used to have the small trio and I would send the bass and drum sound into my amp through the mp3 or aux input using a 1/4 to 1/8 adapter. That way I could use my own pedals without “coloring” the bass and drum sounds.
I want to try this with the mg-300 by running my pedals into the front of the amp and the mg-300 into the effects loop and hopefully have clear sounding drums. I’m not sure if that will work or if you’ve already made a video about it?
Perhaps this would help. th-cam.com/video/bae96wH6KYs/w-d-xo.html
@@ThePedalGuy Yes, I did see that. I'm wondering if I can use my own pedals along with the MG-300 and still be able to utilize the jam function without the drum sound being effected.
@@jimm8594 If the MG300 is in the FX loop of your amp, it should be fine.
@@ThePedalGuy Ah, the old four cable method, I’ll give it a try. Thank you!
@@jimm8594 Sure thing
Hi can i hook up a volume pedal to my trio plus so i can fade songs out ? if so can you tell me how , Thanks GS
Hello pedal guy, can I use the guitar input to loop an accordion part to the digitech Trio. Or does that work only with a guitar.
You can input anything you’d like.
Just bought this
Which one. The TRIO or the MG300?
I don't understand. Why don't you use the effects send/return from the MG-300? I have a Quad Cortex. Why don't I use the effects loop instead of in/out? I am just plain lost.
Ummm the MG300 doesn’t have a send/return. Only the MG30 has that.
@@ThePedalGuy So, if I have a send/return I use that?
@@scorpionleader1967 yes. I have covered this on other TRIO vids with processors that have send/returns
Is there a way to use this to record into a Tascam Dp24 multitrack and separate the bass and drum tracks while still being in sync? I di t use a few in a computer is this possible?
The only way would be to record the drums with the bass turned down on the mixer, then record a second track with the bass with the drums turned down. Unfortunately it doesn’t sync so the only way would be with a daw and move the waveform around until they sync up.
@@ThePedalGuy gotcha that’s what I thought that you very much for confirming I could just send the conplete mix to one track to the tascam via mixer out to capture the song idea though correct?
I have the original trio and a separate looper pedal, where would the looper go in the chain?
The looper would likely go after the fx in your signal chain.
@@ThePedalGuy so mg300 looper then trio?
Is there anyway to get stereo drum and with guitar parts out without cab sim? Headphones have cab sim and I don’t know if we can disable it. I have my own IR and I cannot use that in loop recording. Thx
Unfortunately not
@@ThePedalGuy really appreciate your answer. subscribed! Another question if I may, is there a way to stop playback of the looper but not stopping the band? I like to do that in my music to create changes but I do not seem to be able to do that with Trio. thx
@@raymondtong2640 if memory serves you can do this with the FS3X footswitch. I have video that covers this on the channel.
So Im just looking into this pedal for lonely practices and I have what might be a stupid question , but can I use this trio with my own distortion pedal,delay, overdrive,etc... or do I have to use the trio effects only when using the trio plus band creator?
LOL. Yes you can use your own FX. Here’s a link to show you how th-cam.com/video/hypwY2dEEAA/w-d-xo.html
@@ThePedalGuy Thank you my Friend!
@@chuckwoods9297 sure thing. I have one left in stock if you’re interested
@@ThePedalGuy Right on, I have my eye on a demo model for 251.00 with a 30 day return policy right now, can you do that?
@@chuckwoods9297 Sorry, no. I don't have used TRIO's in stock, just the new model.
Yeah!! Hi Pedal Guy!,..been awhile eh! Hope that you’re fine & well!💐😊 I’ve done this using the Digitech RP 360 Unit and had great/ cool results!! Still using my beloved TRIO+‼️ P.S,..YAMAHA bought the company so stay tuned for some cool stuff under the banner!! b(‘_
Doing well. It actually was Cort guitars that bought DigiTech so we’ll see what happens 🙏
@@ThePedalGuy Wow!! That’s even better news!!👍🏾🤣
Any chance you’ve tried this with Line 6 Helix?
I have not. But that’s on the To Do list.
That is awesome. I’ve tried it several ways but have not figured out the perfect choice??
Subscriber says: Great tutorial. Same connection with POD HD500?
Haven’t used that particular product so I couldn’t say for sure. If it has a send and return that’s another way to hook it up
Thanks, Scott I thought his would an informative video. What a great value for both the Nux and Trio Plus the only addition I am considering is adding the Ricochet Whammy www.digitech.com/whammy-pitch/Whammy+Ricochet.html
That’s a fun pedal too.
So is the fx loop there only for the purpose of removing effects while teaching?
Yes the fx loop should be used with your other pedals like delay, reverb, etc.
@@ThePedalGuy Is that necessary or can you just make sure you turn off your effects while teaching? I’d prefer to not have my entire pedalboard in the fx loop, and just want to make sure it won’t effect the tone if my pedals are not in the loop. Thanks!
@@vjensen56 either way works.
Same way applies to tc helicon acustic play
Thanks for letting us know.
@@ThePedalGuy actually I was asking, forgot to use interrogation mark 😆
what's a "DI" or what part of an amp is it?
Direct Inject