+soundspark I can suggest that to them. We work really lot with Vertex and the G4 has really lot things that you don't need on 3d-printer usage so making light version for consumer use might be good idea.
Dude if you decide to buy another car to destroy, try to start the engine at -10 Celsius and then start going fast and rev it and see if something would break.
Hey guys, I really love what you're doing, overall you really seam to have fun and you bring us with you in these funny moments. No ads, no clickbait, much appreciated. You're great, much love!!!
You should do a series of a red hot cannonball vs different items such as; liquid nitrogen, wood plank, gallon of gasoline, and water just for a few examples.
You should try making Anni's bonus content with the 3D printer! :) I'm not sure if it would work with plasticine but maybe with the special plastic? Hello to you both and the cats!
you can print also rubbery material with these printers so maybe using that would make good result. I am planing to do video about 3d-sculpting software that uses VIVE virtual reality glasses and then print those sculptures out with 3d-printer to be crushed :D
Beyond the press Just curious, did you have any extra schooling or know your IQ? The amount of knowledge you have with so many different things is amazing! It would be really cool if you built a dangerous animal to be crushed! Hope you and Anni have a great week!
Do you have a print cooling fan? Helps print small details like that and overhangs a lot. If not get a 5015 blower fan from aliexpress and 3d print a mount and nozzle, might want to insulate your hotend though since blowing air on it really fast can cool it too much, e3d got their "sock" add-on, a silicone wrapper, can just wrap the hotend in kapton tape as a cheaper solution. In some slicers like slic3r you can set a minimum time per layer to help as well, makes prints like that take longer but not fail.
I would love to see a mirror filmed with a thermal camera. Do mirrors also reflect Infrared Radiation? What about normal glass? Can IR pass through that, or does glass act like a mirror for IR?
Most things that let normal light trough like windows and our blastshield are like mirrors for infrared. But some things like black plastic backs are transparent for it. I think I should make video about that also.
oragamihawk I'm guessing this was meant for some other project so because he would have printed the part anyway, filming it with Flir wasn't that much extra work. And making videos for TH-cam is his job right now. 😀
+Eemeli actually I did this part just for this video. But drawing and printing parts is really easy and fast to do so it wasn't that big deal. I used much more time on editing than preparing the print or even filming the thing.
I uploaded this also there but from now on these are going to be on this channel. These videos are bit different that I first planned and they turned out so close to other stuff on this channel that there is no point to run 3 different channels. TH-cam tends to reward you for uploading more content and by using only 2 channels I think these videos reach much more people than with that separate thermal guys channel.
I uploaded this to there just for an platform to inform people that have subbed that channel but not this about switching this content here. Uploading same video to two channel would split the views and lower both videos on youtube's hierarchy about what to suggest to people.
Thats a good idea, I think even drifting trough corner would make great footage. I am probably getting also FLIR flagship camera here in future that can film thermal slow motion video that would make this idea even better.
Lauri I have to say, this video was pretty boring. That being said, I watched the whole thing without skipping ahead lol. I watch all your stuff it's usually interesting and fun to me. Keep up the good stuff!
It depends on the file format. The printer software uses .stl files but with that Vertex G4 I can convert many other files to .stl so probably I would be able to print things that you have made with 3dmax.
I just uploaded it so there might be some problems on youtube while it's rendering it or doing something like that. Those problems are gone with in couple minutes
And before anybody asks the printer is from Prenta www.prenta.fi/en/ and CAD software is Vertex G4 global2.vertex.fi/web/guest/g4
Beyond the press We actually have the same 3D printer at our school.
Is that Inventor?
like i Think it was +jhonnyq90 did he printed somerhing that made it much more "solid"/stronger
+zuluknob There is already fan and it helps a lot compared to my old printer that didn't have that.
Beyond the press Onko tää CAD vertex ilmanen?
I love that you never clickbait, not on this channel or the original one :)
Us Finns are honest and direct. What do you call it, straight talkers?
"FIRST TIME EVER RECORDED 3D PRINTER ON THERMAL CAMERA MY JAW DROPPED AT MIN 4!!!! MUST SEE!!!!11111!!!1111ONE!!!"
+Zarex He had misleading tags and something like that.
instead of clickbaiting and showing less than advertised, you show way more of interesting informative content. Thank you :)
this is more interesting than it deserves to be
i like how he has Steam open
diederik z I hope he's playing My Summer Car
+soundspark I can suggest that to them. We work really lot with Vertex and the G4 has really lot things that you don't need on 3d-printer usage so making light version for consumer use might be good idea.
If your reading this, I hope you have a great day! 😀
Dude if you decide to buy another car to destroy, try to start the engine at -10 Celsius and then start going fast and rev it and see if something would break.
I am 10 hours into a 12 hour print, just babysitting it.
The thermal bit is fascinating
the music you had on the thermal bits is so nice and relaxing shout out to who ever made it
I hope you guys read this, I just wanted you guys to know how much I appreciate your videos and I always get excited when I see you posted a video!
Spud Muffin Thanks so much, very nice to hear. :)
Hey guys, I really love what you're doing, overall you really seam to have fun and you bring us with you in these funny moments.
No ads, no clickbait, much appreciated.
You're great, much love!!!
That was cool! I have a friend who have got a 3D printer now, so this was quite intresting
Great video - something I did not expect to be interested in, but you always think outside of the box.
Thats crazy how fast the printing material cools. Like immediately when it exits the extruder..its like 80 degrees cooler.
Hello mate. Great channel with interesting content but can't beat crushing things with your hydraulic press.
I like how you beat VSauce to the punch for thermal imaging :P
love you're video's, man. I watch this shit when I wake up
You should do a series of a red hot cannonball vs different items such as; liquid nitrogen, wood plank, gallon of gasoline, and water just for a few examples.
You should try making Anni's bonus content with the 3D printer! :) I'm not sure if it would work with plasticine but maybe with the special plastic? Hello to you both and the cats!
you can print also rubbery material with these printers so maybe using that would make good result. I am planing to do video about 3d-sculpting software that uses VIVE virtual reality glasses and then print those sculptures out with 3d-printer to be crushed :D
Beyond the press Just curious, did you have any extra schooling or know your IQ? The amount of knowledge you have with so many different things is amazing!
It would be really cool if you built a dangerous animal to be crushed!
Hope you and Anni have a great week!
Beyond the press Ok sounds good, look forward to the video! Have a nice day :)
Could you film throwing hot water into cold air with the thermal cam? Like those videos where it instantly turns into snow
will be trending in 1 day
This should be the main channel
Do you have a print cooling fan? Helps print small details like that and overhangs a lot. If not get a 5015 blower fan from aliexpress and 3d print a mount and nozzle, might want to insulate your hotend though since blowing air on it really fast can cool it too much, e3d got their "sock" add-on, a silicone wrapper, can just wrap the hotend in kapton tape as a cheaper solution. In some slicers like slic3r you can set a minimum time per layer to help as well, makes prints like that take longer but not fail.
watching low-solid infill is hypnotic @_@
Anyone knows what's the first ambient track?
I would love to see a mirror filmed with a thermal camera. Do mirrors also reflect Infrared Radiation? What about normal glass? Can IR pass through that, or does glass act like a mirror for IR?
Most things that let normal light trough like windows and our blastshield are like mirrors for infrared. But some things like black plastic backs are transparent for it. I think I should make video about that also.
That soundtrack!
what is this song called?
Al menos soy el primer comentario en español xD
ScoutTF2 me ganaste
ScoutTF2 tercero
I heard you say peon press channel at the beginning :P
Try do put hot water on frozen things like glassand other things
How do you have the time to do this? I can't think of this many ideas, much less do them!
oragamihawk I'm guessing this was meant for some other project so because he would have printed the part anyway, filming it with Flir wasn't that much extra work. And making videos for TH-cam is his job right now. 😀
If you use 50 hours every week on youtube stuff you get quite a lot done :D
+Eemeli actually I did this part just for this video. But drawing and printing parts is really easy and fast to do so it wasn't that big deal. I used much more time on editing than preparing the print or even filming the thing.
Beyond the press OK, thanks for information!
Why did you not uploaded it to Thermal Guys channel?
I uploaded this also there but from now on these are going to be on this channel. These videos are bit different that I first planned and they turned out so close to other stuff on this channel that there is no point to run 3 different channels. TH-cam tends to reward you for uploading more content and by using only 2 channels I think these videos reach much more people than with that separate thermal guys channel.
Yeah, thats true.. You should credit that channel at every beggining of thermal video here.. It can gain you views even on that channel.
I uploaded this to there just for an platform to inform people that have subbed that channel but not this about switching this content here. Uploading same video to two channel would split the views and lower both videos on youtube's hierarchy about what to suggest to people.
you should make a video where you test how much weight duct tape can hold
Dude, why didn't you film the print with the slowmo-camera? ;)
I could do that also, I have couple great 3d-printing projects in my mind that I could film in slowmotion
It's ABS or PLA ?
plz, make a video of burnout on your honda s2000 with thermal camera, until explosion of tires
Thats a good idea, I think even drifting trough corner would make great footage. I am probably getting also FLIR flagship camera here in future that can film thermal slow motion video that would make this idea even better.
5:50 Does it not have nozzle fans ?
Yes it does and it helps a lot when I compare it to our old printer but this was still quite hard thing to print as I intend it to be
lauri why do you use Opera?
I really like mouse gestures and using other browsers with mouse gesture plugins won't work as well as opera in my opinion
Beyond the press thanks, I'll try it some time
buy a shit ton Adidas stuff and do a slav squat with is all on.
nice
Lauri I have to say, this video was pretty boring. That being said, I watched the whole thing without skipping ahead lol. I watch all your stuff it's usually interesting and fun to me. Keep up the good stuff!
the maaacheeein
You make moist videos!!!!!!
Olitte kajaanissa perjantaina
Pizza herra mä en
Pizza herra Nii oltiin, siellä oli kivaa!
If I send you some 3d models from 3dmax can u print them lol
It depends on the file format. The printer software uses .stl files but with that Vertex G4 I can convert many other files to .stl so probably I would be able to print things that you have made with 3dmax.
Hi
This misprinted midget seems very dangerous, we must deal with it.
Very cool!
...or hot...
can't play video
I just uploaded it so there might be some problems on youtube while it's rendering it or doing something like that. Those problems are gone with in couple minutes
Beyond the press problem solved :) cheers...ill get the popcorn
Ricky Pingolia Nah, i will go get some chips.
Sofia Nieminen I just ordered pizza
omg im under 1k
first film I havent enjoyed.
1ST view and 1ST comment 1st like
Stfu im first
39th hello
damn im early
23rd
first