Hallo Matteo ! einfach mal DANKE für die super tollen Video's von Dir !! Hilft so manchem zur Kaufentscheidung ... Habe mich nun auch entschieden , für ein weiteres Projekt ;-) danke nochmals und e Guts Nöis !! Grüessli Thomy
Man that good looking little truck, I may have to get one of these! Great video and I am glad he didn't get stuck on the big sand hill, that may have been hard for him to get out of!! Merry Christmas 🎄
Another nice video, Matteo. 👍😊 The suspension articulation looks very scale accurate, especially for such a tiny truck. Have you made any modifications?
Could you recommend a longer steering shaft and longer rear axle shaft for this Red FMS K10 (or Glacier)? Maybe a full compatible axle set. I want to make the car wider, with the tires out of the body. Here in Brazil there is no hobbyshop.
Hi mat. Ik this isnt the video but what receiver+ transmitter, servo, and battery did u use for your tamiya cc01 isuzu. I just got it and im not sure on what electronics
with something like this you have everything you need for a good price: www.carson-modelsport.com/carson_de/kategorien/carson-zubehoer/fernsteueranlagen/rc-reflex-pro-3-elektro-set-500500091-de.html
It was a bit difficult, you have to take off the body, to do this you have to remove some tiny screws and parts, not easy to put them back later! Needs a little patience! 😊
The driver doesn't seem to know the difference between crossing a stream and following a stream. lol Nonetheless a great truck and nice footage. Looks really scale.
I had to remove the body and open it up. It is a bit tricky. Had to remove some parts with the very thin screws, but finally it worked. Did not remove them completely, just a little to make it possible to insert the driver.
Matteo is a very dutiful driver, even in the wilderness he uses the turn signals! 😂😂
Vorbildlich ! 😂😂😂
👏
Funny
That is one good looking scale truck, nice run.
Now that's what I call an Adventure!👍🏾
🙏👍
Nice, always like the scale, story based RC vids. Subscribing.
Hallo Matteo ! einfach mal DANKE für die super tollen Video's von Dir !! Hilft so manchem zur Kaufentscheidung ... Habe mich nun auch entschieden , für ein weiteres Projekt ;-)
danke nochmals und e Guts Nöis !!
Grüessli Thomy
Hoi Thomy, vielen Dank! Solche Kommentare freuen mich und motivieren mich sehr! Der au alles Gueti im neue Johr! 👍😊
Beautiful video Matteo! My son's name is also Matteo
Very nice! The good thing is that the bed is empty like in a real truck 💪🚀🔥 Chevy looks great🙂👍
your productions are always inspiring! Thanks👍👍👍
Thanks a lot! I appreciate that! 🙏😊
Nice Matteo!
You must have the camper special suspension, regular 1/2 ton Chevy p/u would never handle such a load😎
Happy holidays!
Looks like it is the camper edition Chevy
Happy Holidays☃️😁👍
Same to you!
vraiment super bien comme vidéos comme d'habitude, un petit bonjours du centre de la France 👏👏👌
Merci beaucoup! 👍😊
Very nice cutie! I have the Toyota FJ Cruiser and I love it! Merry xmas!
Nice video and his work too.
It's cutie long and narrow style , the run is also good.
Thanks and happy new year to Japan! 👍😊
This was great!! Very nice ride along.
Thanks! Glad you enjoyed it! 👍😊
Q bonita camioneta. Estoy próximo a comprarme uno
That looks awesome!! Merry Christmas!
Happy new year Steve! 😊
Hi Matteo ,
Mal wieder ein sehr schönes Video von dir. Mach weiter so und frohe 🎄 🎅🏻
Gruß Mark
Really good looking truck 👍
Man that good looking little truck, I may have to get one of these! Great video and I am glad he didn't get stuck on the big sand hill, that may have been hard for him to get out of!! Merry Christmas 🎄
I like how the wood magically was loaded :)
You need a better radio too !
Das ist ja wieder einmal ein schönes Video, tolle Aufnahmen und das Auto ist klasse. Vielen Dank
Immer wieder gerne! Danke fürs schöne Feedback!
We miss you, dude
Another nice video, Matteo. 👍😊 The suspension articulation looks very scale accurate, especially for such a tiny truck. Have you made any modifications?
Thanks! No, everything is stock. 👍😊
Great video, FMS did a great job on this one.
Thanks! Yes, they did! 😊👍
Da werden kleine Steine plötzlich groß... Aber geniales Video! Hätte auch noch Holz zum transportieren........
Danke Rolf! 👍😅
Can I drive in water or snow or any kind of weather? Would love if u can drive it in water and make a vid about it
You can see it in this video, I drive in a bit water. I would not recommend to go deeper.
Could you recommend a longer steering shaft and longer rear axle shaft for this Red FMS K10 (or Glacier)? Maybe a full compatible axle set. I want to make the car wider, with the tires out of the body. Here in Brazil there is no hobbyshop.
Sorry, I can't.
Rc mal nützlich!
Mit soviel Holz kommt man gut durch den Winter.
Danke! 👍🔥🔥🔥🔥🔥🔥🔥🔥😂
Hi mat. Ik this isnt the video but what receiver+ transmitter, servo, and battery did u use for your tamiya cc01 isuzu. I just got it and im not sure on what electronics
with something like this you have everything you need for a good price: www.carson-modelsport.com/carson_de/kategorien/carson-zubehoer/fernsteueranlagen/rc-reflex-pro-3-elektro-set-500500091-de.html
Nice video merry Xmas
Hi !
Nice vidéo👍
Where you find the pilote on this rc?
Thanks !
It's from Schleich, a German toy manufacturer. www.schleich-s.com/en/US/
Dope! I love it!! What are the scale dimensions on the figure inside?
The figure is about 1:18 scale. It's from Schleich www.schleich-s.com/en/GB/
awesome, i have the fms toyota land cruiser, how did you put that driver inside?
It was a bit difficult, you have to take off the body, to do this you have to remove some tiny screws and parts, not easy to put them back later! Needs a little patience! 😊
@@Matteomeier omg, seems tricky... but ill do my best, thanks for the tip man.
Ur stuff is awesome,
Glad you like it! 👍
nice and cool
Very nice !! But it's a pity that there are no headlights and turn signals at the rear !! 😀
Yes, We agree!
@@Matteomeier Perhaps it will come later 😀
What a lovely video!
Thanks Del! 👍😊
The driver doesn't seem to know the difference between crossing a stream and following a stream. lol Nonetheless a great truck and nice footage. Looks really scale.
😂 Yes, he's a novice driver... 👍
How did you make 18 scale size pieces of wood and those hooks how did you get those to be 1/18 scale?
I have searched for it
Any plans to review the Vanquish Phoenix, Matteo?
Yes, I ordered it two months ago but still waiting for it....
@@Matteomeier same here. Ordered mine on Nov 29th....
Is this triple A battery like kyosho 4x4 4runner or dangerous 2 s lipo with bad charger included?
Nice video, its a smart looking truck, but would be even nicer in 1/10th
I agree! 😅
Very nice video
🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
Thanks! 🙏
I thought the doors didn’t open on this one how’d yah get the driver in? I wanna do the same
I had to remove the body and open it up. It is a bit tricky. Had to remove some parts with the very thin screws, but finally it worked. Did not remove them completely, just a little to make it possible to insert the driver.
Amazing bro 😍😍😍
Thank you so much 😀
❤ likeeeee
FMS Rule De Skies!
Ahahhhahahahaha!
Live Axels looks legit,
Or is it Matts Trickory
Is it waterproof?
I would say only water resistant.
Cool video, you have to subscribe right away
👍 Thanks!
404. Big Like