Switch it on: Build a sleek LED circuit with a slide switch , battery and two LED's on tinkercad!

Platform link: www.tinkercad.com/
Components Needed:
9V Battery
Slide Switch
Resistors (optional, depending on the LEDs used)
LEDs (any color)
Wires
Circuit Setup:
Connect the positive terminal of the battery to one terminal of the slide switch.
Connect the other terminal of the slide switch to one terminal of each LED.
Connect the other terminal of each LED back to the negative terminal of the battery.
Adjust LED Properties:
Double-click on each LED to change its properties, such as color and brightness.
Simulation:
Start the simulation and toggle the slide switch to see the LEDs glow or turn off accordingly.
In this circuit, the slide switch acts as an interrupter. When the switch is in one position, the circuit is closed, allowing current to flow from the battery through the LEDs, causing them to light up. When the switch is in the other position, the circuit is open, interrupting the flow of current and turning off the LEDs.

[@hamysharma8974]

Wow Great 👍🏻 🎉

[@officialhappydhaliwal]

👍👍👍👍👍good

[@kapilsabarwal8647]

👏🏻👏🏻👏🏻👏🏻