Dude we really need more aftermarket parts for the atvs - forward arched arms longer axles I’m so tired of the clearance issues with mine and not being able to find anything
I hear that my friend. If I can get Curren RV on board with me I could do LOTS of things. Just depends on witch way they want to go. I’ve been trying. I have the know how they have the$$$$
hahahahaha a fkn CHAINSAW as a BOX cutter 🤣🤣, did Ronnie install your LED stream flashing light on your tool box ? Thanks for the quick Tips Stevo, great vid
Hey Redneck I just bought a U Force 800 a couple weeks ago but can’t pick it up until after the WV state fair. They have a booth set up and need it for display. First UTV and on a learning experience so watching lot your stuff!!! Thanks a bunch!! I need to put signal lights on. Do you have any video on that!! Later
I hope you are renting it to them lol. I actually do on the zforce 800 witch will be very similar. Thank you buddy glad your liking the content. Have a good one.
I'm a little confused. Did you say this is a different helix than what you tested on the 600 touring? I'm looking for something that will give me more torque on the dunes and it sounds like a new helix is the answer
The helix shown in the video here is a 40 degree helix. I run a 40 in my 800 EX and it does good. With that said I sell and run a multi stage helix in my 600 as you can see a few videos back. I am not sure witch one you would need for the dunes. That’s something you would have to play with.
@@R.N.GPerformance Probably a multi stage would be good. When starting out it has plenty of power until you get to the top of the dune and then your momentum is gone. I can put it in low and have plenty of power to cruise up the hill but then I have to switch it back to high in between dunes and then back down to low for the next dune (pain in a$$ as you can imagine)
@@R.N.GPerformance I'm thinking the multi stage would be nice. I have decent power but by the time I get to the top of the dune I lose all my momentum. I can put it in low and have plenty of power but then I have to switch it to high between dunes and then put it back down to low. Pain in the a$$ as you can imagine.
hi love ur show im a poor man on ssd i have a 2020z950 my son got me cause i cant cant walk good how much would u charge me to fix my eng i have a bad knock in it i can send my eng to u if u can fix it it only has 400 miles on it thant u so much
I have a 2022 CF Moto 400 long seats I am looking for a phone number so I can get parts for a lift kit and wheel spacers and magnets for the clutch it's under warranty but they can't get f*** all down here so please can somebody help me out and get a number for me
I need a phone number so I can get a lift kit for my CF Moto 400 and the wheel spacers I'm in Canada Nova Scotia and nobody sells parts down around here and I got a 20/20
I Couldn't stop watching the rainbow chase light on the black toolbox slowly falling off.
😂 😂 yeah. Heat was killing that sticky tape. Definitely need better tape.
Lol
I’m with Scot earlier, my ADD wad kicking in and had to go back and watch you again as I was really into the chase light. Lol
😂
Dude we really need more aftermarket parts for the atvs - forward arched arms longer axles I’m so tired of the clearance issues with mine and not being able to find anything
I hear that my friend. If I can get Curren RV on board with me I could do LOTS of things. Just depends on witch way they want to go. I’ve been trying. I have the know how they have the$$$$
I really hope to see high quality, quite, energy absorbing style bushings for the U force 1000 in the future. It's nice to see more cf parts 👍
I believe they are working on it. Hopefully soon buddy. I agree.
Do you have part number for a sleeve kit for a 2018 zforce 800?
I don’t my friend
Do I have to change my bushings on my CF Moto 1000 2023 super ATV a arms
Yes you have to buy the brass ones we sell www.rngperformance.net
@@R.N.GPerformance do you have the brass bushings for 2023 front and rear
hahahahaha a fkn CHAINSAW as a BOX cutter 🤣🤣, did Ronnie install your LED stream flashing light on your tool box ? Thanks for the quick Tips Stevo, great vid
Haha 😂 MINT for sure 😂. I just stuck them up but I think it’s the heat making them fall off lol. Thank you buddy.
Hey Redneck I just bought a U Force 800 a couple weeks ago but can’t pick it up until after the WV state fair. They have a booth set up and need it for display. First UTV and on a learning experience so watching lot your stuff!!! Thanks a bunch!! I need to put signal lights on. Do you have any video on that!! Later
I hope you are renting it to them lol. I actually do on the zforce 800 witch will be very similar. Thank you buddy glad your liking the content. Have a good one.
I'm a little confused. Did you say this is a different helix than what you tested on the 600 touring? I'm looking for something that will give me more torque on the dunes and it sounds like a new helix is the answer
The helix shown in the video here is a 40 degree helix. I run a 40 in my 800 EX and it does good. With that said I sell and run a multi stage helix in my 600 as you can see a few videos back. I am not sure witch one you would need for the dunes. That’s something you would have to play with.
@@R.N.GPerformance Probably a multi stage would be good. When starting out it has plenty of power until you get to the top of the dune and then your momentum is gone. I can put it in low and have plenty of power to cruise up the hill but then I have to switch it back to high in between dunes and then back down to low for the next dune (pain in a$$ as you can imagine)
@@R.N.GPerformance I'm thinking the multi stage would be nice. I have decent power but by the time I get to the top of the dune I lose all my momentum. I can put it in low and have plenty of power but then I have to switch it to high between dunes and then put it back down to low. Pain in the a$$ as you can imagine.
hi love ur show im a poor man on ssd i have a 2020z950 my son got me cause i cant cant walk good how much would u charge me to fix my eng i have a bad knock in it i can send my eng to u if u can fix it it only has 400 miles on it thant u so much
What are the prices of them
Www.CFMOTOusaparts.com
Can you pretend that you are me to get Larry to print my bushings?
😂 😂 he isn’t printing any at the moment.
My back has me pretty fucked up right now.
@@larry97016 I was just playing. Like I said at your leisure
👍
I have a 2022 CF Moto 400 long seats I am looking for a phone number so I can get parts for a lift kit and wheel spacers and magnets for the clutch it's under warranty but they can't get f*** all down here so please can somebody help me out and get a number for me
Message me on Facebook. I’m working on a phone number soon for everyone
I need a phone number so I can get a lift kit for my CF Moto 400 and the wheel spacers I'm in Canada Nova Scotia and nobody sells parts down around here and I got a 20/20
Message me on Facebook