good job mate. i also saw the red dragon controls about a month ago and tbh i was sort of skeptical about the quality of the product, but it seems it turned out great. loving your mods so far
The best installation video on this kit, that Customization of belly pan was a bit tricky isn't it? But that's where the real fun is when u have to figure out a way. Well done mate 👏
Did you ever install back the frame sliders? Or does it not totally work with the forward controls? Thanks for your informational videos. Much appreciated mate.
@@adolmark yes mate but I sold the bike a year ago. The side plate is legal if mounted width ways and is viewable from a 45 degree ark from both rear quarters of the bike, in Queensland
Hi I am hopefully going to get this bike , I have trouble with movement in my left knee, and siting on the stock bike it’s difficult for me to get my foot under the shifter leaver, so was wondering when you took of the bracket , you showed use the 2 bolt holes in the bracket ,saying you shift the new bolt to the front hole instead of the back hole, so was wondering if the original bracket shifter can be put forward to that front hole , as I think it would give me foot the extra room to put my foot under it to shift , but if not these dragon forward controls would definitely help me .
I have not tried that since the video was installed i have left it as is. If you were to use that rear hole, the shifter would be too close to the foot rest though. On the black new shiftter from red dragon, you will se a couple of holes at 11.23. Those holes can be used to adust the angle that the shifter sits at. You will be able to achie a larger gap than what is shown in my video, by just using the red dragon shifter but changing the mounting hole to what i used in this video.
I guess then that you know how much a shop would charge going by an hourly rate, as to the length of my video. it should take no longer than 30 to 60 minutes without having to describe everything like i did in my video
@@TweakedGSX I contacted K-speed they said that the exhaust pipes are in the front for 2023 and it has not been confirmed if it will fit and to wait :/
Please make sure that you read the video description and check out the necessary links before commenting, to save my sanity. Cheers!
good job mate. i also saw the red dragon controls about a month ago and tbh i was sort of skeptical about the quality of the product, but it seems it turned out great. loving your mods so far
Thanks for the feedback and I'm happy you have enjoyed the build 👍
Definitely getting these. I went from a classic style cruiser to the Rebel 500 and I love it a lot but I really miss the forward controls.
It's defnitely a new dimension to the bike. I like that style of riding too😉
The best installation video on this kit, that Customization of belly pan was a bit tricky isn't it? But that's where the real fun is when u have to figure out a way. Well done mate 👏
Thanks Man, yeah it was no problem for me to modify the bracket 👍
Best Motocycle customs part from Viet Nam. Proud of it and thank for this videos 😁
Best vid on the subject and with only one hand. Thanks.
That's not all he does with one hand !
The installation videos were helpful to me.
RedDragon's installation documentation and videos were not complete.
Thank you.
Thanks glad it worked out well👍
Thanks followed all your instructions on forward control THANK YOU 😊
Great video. Just got my 2022 Rebel ABS SE last Friday. Definitely something I'd want to do eventually. What license plate bracket and light is that?
Thanks👍 I have those parts in my other video with links in the description of the kspeed rear fender install vid
Thank you I just ordered a set I'm 6'1
61.... you're never too old. Good luck with your new bike old dude !
@@adambane1719 6-ft and 1 inch
Old and tall.... Good for you buddy. Go get 'em !!@@Response1980
I’m 6’1 as well.. I can’t wait to get these!!!
Did you ever install back the frame sliders? Or does it not totally work with the forward controls? Thanks for your informational videos. Much appreciated mate.
Sorry I missed this comment. It unfortunately is too close to the clutch and brake lever so they can't be installed at the same time
Hey mate, are you in Australia?
Just wondering about the rear fender and the mounting of lic plate? I’ve been told side mount isn’t legal?
Cheers
@@adolmark yes mate but I sold the bike a year ago. The side plate is legal if mounted width ways and is viewable from a 45 degree ark from both rear quarters of the bike, in Queensland
So if I got a bracket that placed the lic plate on the side but inline with the back wheel should be ok?
@@adolmark it must the horizontal just like it is from factory. Later in my videos I show another test mounted setup
your bike looks really nice
@@fabianobarbieri5681 Thanks man 👍
Sorry to reply again,just for your reference for the bit I am talking about it’s 11.07 minutes in your clip .
Hi I am hopefully going to get this bike , I have trouble with movement in my left knee, and siting on the stock bike it’s difficult for me to get my foot under the shifter leaver, so was wondering when you took of the bracket , you showed use the 2 bolt holes in the bracket ,saying you shift the new bolt to the front hole instead of the back hole, so was wondering if the original bracket shifter can be put forward to that front hole , as I think it would give me foot the extra room to put my foot under it to shift , but if not these dragon forward controls would definitely help me .
I have not tried that since the video was installed i have left it as is. If you were to use that rear hole, the shifter would be too close to the foot rest though. On the black new shiftter from red dragon, you will se a couple of holes at 11.23. Those holes can be used to adust the angle that the shifter sits at. You will be able to achie a larger gap than what is shown in my video, by just using the red dragon shifter but changing the mounting hole to what i used in this video.
Thanks for a minute there I thought I would be capable of doing this... But no way I'm even trying 8)
I guess then that you know how much a shop would charge going by an hourly rate, as to the length of my video. it should take no longer than 30 to 60 minutes without having to describe everything like i did in my video
Juzzie, Was it cheaper to buy these from Black Rebel as opposed to Phucnikon ??
No idea who that is sorry. But what I have has been perfect.
Will the Diablo belly fairing fit new 2023 rebel 500 ?
Yes for the 500
@@TweakedGSX I contacted K-speed they said that the exhaust pipes are in the front for 2023 and it has not been confirmed if it will fit and to wait :/
@@Jesus-gy7vw I haven't put it on myself but if you look at my wheel cover video I have a 23 model in my garage and it looks the same position as 22
what foot pegs are those? thanks for the install vid
Hi I have that install in my kspeed Diablo headlight cowl video at the 14 minute mark. A link is in the description of that video👍
Harga brapa
Do you know if that rear tail light fender will fit on the rebel 1100?
Contact K-Speed if you are unable to see it on their site