2023 Toyota Highlander All Keys Lost

[@peterajekwemu7679]

The reason why the key didn't work properly was as a result of how you generated it. I have done quite a number and they all worked perfectly.

[@Mimi-dy8gd]

So how do you do it ?

[@jackgates6949]

Great job, Nicky!

[@BAzouDembele-f2l]

hi I need help I tried to add a smart key to rav4 2020 hybrid with Autel km100 but it gives a message ECU not supported what to do?

[@ika4042]

Nicky how did you fix this issue not to starting Without touching start-stop knob?and remote working?

[@peterajekwemu7679]

Using the right key frequency code key code when generating the key.

[@daudajalloh6183]

I tried km100 on 2023 Highlander but it failed to back up data....i have to use lonsdore with the ADP adapter to back up immo data......also lonsdore failed to generate emulator......and have to generate emergency ft smate key to program key....the one accept key but the other one refuse to add key

[@peterajekwemu7679]

First, when performing a back up with km100, you need to use your USB cable to connect your vci and your programming device. Bluetooth must be switched off and Internet connected.

[@locksmithinygn2162]

Km100 or km100 x ???

[@geecrawdad]

Must be an older 100 before Autel dropped AKL. I just got a new 100X and it no longer has the all keys lost function/backup immo/analog key. The Autel site shows the KM100/x/e as being the same except for where it's distributed.

[@osmanflores7328]

Can this process be used on a 2023 Toyota Venza? Immo was activated after an theft attempt, ecu is locked. Even the original key is not recognized. Any tips?

[@yaboi5686]

Have you tried checking if possible by smartbox?

[@HotTvify]

I think km100 stop supporting AKL for highlander i dont see analog way to generate the key. And cannot communicate with the ECU error

[@CaseyMalone-h2o]

Are you in USA or other?

[@geecrawdad]

Correct, no more AKL for many vehicles especially domestic - USA

[@peterajekwemu7679]

You did not generate the key with the right key code and frequency. I done so many using my im508 and they worked perfectly.

[@ShabirKeyMaker10]

Good job dear

[@ajmobileautoelectricdallas7980]

The reason the remote doesn’t work is because you have door open. You should have the door closed and then program the remote.

[@AdnanAutoSmartKey]

4a 8a ??

[@nickylocks]

8A

[@royalkeyqatar4899]

❤❤❤

[@ModernLocksmiths]

Why would you show the general public this?

[@DylanT18]

Bro wants the locksmith industry to become over saturated

[@ArsenicBlavk]

Sir as a locksmith myself I totally agree with this information that’s been put out…

[@waldemarfechtel1644]

Fear cokurenz?

[@switchesgilzzy9074]

Because it easy without vids

[@S-wick]

Relax no one wants to steal a highlander 😅 grow up steal an escalade

[@pavlo5203]

😊😊😊❤❤❤

[@jesusiscomingsoon.5225]

🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

[@safcontacts89]

km100 can it read the data and pin to program