thanks Mads, great video again! for some reason I cannot get the windows transparent, it seems I keep seeing the inner wall. When creating the overview I had to switch to the Arch workbench to see the tool you used and I get a different color, but all in all it looks pretty good :). Your videos really helped me get started quickly and really made me enjoy working with the tool, thanks a lot!
Thanks so much for these videos! I was stuck with Arch WB not knowing how to start. Your multi layer wall technique helped me a lot. I have a question about the gable part of the wall, the triangular part under the roof: I sure could use a part to close it but it wouldn't be a wall and then it would not be possible to show blocks as on the lower part. I see in your video that it stays open... How would you close it? Thanks😃
Great tip on mirroring! Thank you. Just wondering if your computer has a graphic card? With all the arrays I am inclined to think the model would be pretty hardware intensive.
Thanks for the video Mads, one question, how would you do a truss that is not symmetrical from roof mid point? I was thinking about a longer truss and then using Slicing...
Thank you, this is very helpfull. I have a question on how-to add a fence around the house using BIM, knowing that this fence could be higher and lower than the base "0" ion Z-axis of the house ?
I don't know this workbench too much. But you can just draw one piece in the part workbench and then multiplay them like the tile and you can also make the position also to negative example -1 m. That means you can position them everywhere.
@@Tom-ku8bu Thank you Tom. My question is quiet confusing, on another forum, I was advised to use "Geomatics", before using BIM, as I need to modelize the landscape. Once my knowledge will be more "correct" I will come back to you, because your presentation is what I intent to go through.
It is so nice to see a professional at work! Keep up the good work.
"...and give it a nice color" 👌😁 Great video, thank you for making/sharing.
A very good video! Thanks a lot! Would be great to see other types of roofing.
This was a very good video. Thank you for showing us how to do it.
Thanks a lot for this good video! Great job! It was much helpful.
Narva very your videos. Everything is clear.
Great Job! Thank You!
this is really a A content, I hope more content on complicated residential or mid-rise modeling sir. with documentation in techdraw is superb
roof tiles step file
drive.google.com/file/d/1SpVspqbaqHUb-VAuPsRcxh63FO5aNDwf/view?usp=sharing
drive.google.com/file/d/1WZ8dJD8Tx5ZfH1cVDTVReerT3KeOy2C9/view?usp=sharing
Thanks, Mads. I spent a lot of time looking for a tile step...
Thanks a lot!
thanks Mads, great video again! for some reason I cannot get the windows transparent, it seems I keep seeing the inner wall. When creating the overview I had to switch to the Arch workbench to see the tool you used and I get a different color, but all in all it looks pretty good :). Your videos really helped me get started quickly and really made me enjoy working with the tool, thanks a lot!
Thanks so much for these videos! I was stuck with Arch WB not knowing how to start. Your multi layer wall technique helped me a lot.
I have a question about the gable part of the wall, the triangular part under the roof: I sure could use a part to close it but it wouldn't be a wall and then it would not be possible to show blocks as on the lower part. I see in your video that it stays open...
How would you close it?
Thanks😃
Hej Mads, Thanks for these good tutorials. Can you make a tutorial of how to add a nice danish garden/landscape with trees and grass around the house?
th-cam.com/video/fuASoXriHNY/w-d-xo.html
Great tip on mirroring! Thank you. Just wondering if your computer has a graphic card? With all the arrays I am inclined to think the model would be pretty hardware intensive.
no i dont have a graficcard arayes in freecad can handel verry complex thinks😁👍
Thanks for the video Mads, one question, how would you do a truss that is not symmetrical from roof mid point? I was thinking about a longer truss and then using Slicing...
I will drow it flat on the ground.. and move it to lokation...if i shut explaine it better i neat more information.. 😁🇩🇰👍
Thank you, this is very helpfull. I have a question on how-to add a fence around the house using BIM, knowing that this fence could be higher and lower than the base "0" ion Z-axis of the house ?
I don't know this workbench too much. But you can just draw one piece in the part workbench and then multiplay them like the tile and you can also make the position also to negative example -1 m. That means you can position them everywhere.
@@Tom-ku8bu Thank you Tom. My question is quiet confusing, on another forum, I was advised to use "Geomatics", before using BIM, as I need to modelize the landscape. Once my knowledge will be more "correct" I will come back to you, because your presentation is what I intent to go through.
Is it possible to attach/host the truss and tiles to the Roof object in BIM/Arch workbench?
just drage it to the folder with the mouse🇩🇰😁
Hi!. Can you share the file for learning? Regards
The link to the tile is under comment 😉
5:22 you don't know if it is 2,4 or 2.3998 or 2,401 meters you are guessing? For a educational video thumb up! :) Cheers.
It is just to show how to du👍🇩🇰