Conic Sections_Hyperbola_Problem 1
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Download the Manas Patnaik app now: cwcll.on-app.i... Hyperbola is a conic section which is generated by the intersection of a plane and a double napped cone. In this video you will learn to draw a Hyperbola through any point P given its location.
Problem Description: A point P is 30 mm and 50 mm respectively from two straight lines which are at right angles to each other. Draw a rectangular hyperbola from P within 10 mm distance from each line
My Affiliate Links:
My Samson Go Mic: amzn.to/2xgE0qR
My Wacom Writing Tab: amzn.to/2xh8FEv
Books I refer: amzn.to/2xe550a
amzn.to/2xgbJ3E
amzn.to/2jJOMmf
I am proud to myself that I have got teacher like you....you are best teacher of graphic in World...
sir what about p within 10mm distance from each line
Sir in the question it is given the hyperbola should be 10cm from each u didn't explain this
Thank YOu So much Sir.
I passes Engineering Graphics ...because of your vidoes only ..
Thank you
+Manish Gautam
Thats great manish...
All the best in life
You Are awesome Sir..
The way of explaining is Mind-blowing..
SALUTE
+Manish Gautam
Thanks Manish
Sir,you are understanding us in very easy language,thank you sir.
Please,tangent and normal are missing in this problem.
Hlo Sir I am really very much thankful to you. I Understood this better than in my college. I always remember you. Once again Thanks a lot Sir
I need to submit my drawing sheets tomorrow n I forgot few drawings procedure . it's all becoz of u I could do it. Tq sir terrific expanation
All the best ashwin.....
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): th-cam.com/video/WG6H2pISUzQ/w-d-xo.html
2. Engineering Drawing/Graphics (Hindi): th-cam.com/video/SB83cUaAiCM/w-d-xo.html
3. Engineering Mechanics / Applied Mechanics: th-cam.com/video/Z4WN2Z9okfs/w-d-xo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
5. Theory of Machines: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
6. Machine Drawing: th-cam.com/video/iFCnFUR9Gdc/w-d-xo.html
7. Engineering Drawing for Engineering Services Prelims: th-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: th-cam.com/video/0fejUC79LZY/w-d-xo.html
9. Manas Speaks Series: th-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
th-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
I am very much thankful to you sir u taught in an excellent manner your teaching is far more better than university professor🙏
How to draw perpendicular bisector and tangent
Good Evening Sir,
Your All Videos Are Very Informative .
THANK YOU VERY MUCH .
I Have Engg.Graphics 1 On Critical .
Thanks for appreciating my work Omkar........
All the best man...
And do create an awareness amongst your friends and classmates to subscribe to this channel so that al can benefit...
what about 10mm distance?
draw a conic section a distance of the point from a fixed point is 30 mm and is doubled the distance from a fixed line
Please sir, give this question answer
Can we take reverse like 30 left side and 50 down side?
Sir, we take a same distance between all points...
Sir its told 10mm distance..from each line.But u didn't show it.
Thanks for information
Thank you sir for making engineering drawing easy for us.
I have a confusion in this.
How can we say that this will always be within 10 mm distance from two lines.
Please upload all the videos in English I don't know hindi but I understand your fluent English some videos are uploaded in Hindi I can't understand clearly sir
It's my suggestion sir for you
Engineering Drawing | Engineering Graphics |: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Sir very great explanation sir thanks for providing such a good content.
Sir I have one doubt how to take distance of point they didn't mention anything only they 30 mm & 50 mm how do we know which side is 30 and which is 50
In this problem, is two perpendicular line is asymptoties of hyperbola or not?
Yes
nice vedios very helpful to me and always solve on autocad it understand well and nice and become pretty simple also
+Ajay Nakil
Hi ajay
Thanks a lot for appreciating.....
And do let your friends know about this channel so that they can also benefit....
Sir how to draw tangent and normal for rectangular hyperbola
In case of hypocycloid and epi cycloid, can i take reverse direction, clockwise___ anticlockwise. Please give me reply quick
Sir
Only 10p-points we should or that is our wish
Sir,
shall we take the point P, which is 30mm from x axis and 50 Mm from y axis
As you took 50mm from x axis and 30 Mm from y axis
We take distance between 2 red points is 1 cm can we take more than 1
How to draw tangent and normal for this problem sir?
Thanq sir u r explained next level hand off sir ....
Does the same process works out if it is a rectangular parabola? Plzz reply fast sir🙏
Hello Chandu,
This infact is a rectangular Hyperbola as the asymptotes are at 90 deg angle to each other.
Please give answer quickly.
Tq so much sir..... very helpful
We can take as many points as we want on vertical and horizontal line.... Right?
Yes
Sir can I get for this method full marks
thanks sir
I wish I could like more than once.🙏
is it our wish to point the point on horizontal and vertical line like(1mm 2mm)
Sir ur explanation is amazing but i have a doubt regarding 10mm distance from asymptodes..plz say the answer
Sir.. Can u tell me this construction when the "P" is given as position of point...
Sir please say how to draw tangent and normal for rectangular hyperbola.
Hw to draw a tangent fr the curve sir?
Normal and tengent kaise khichenge sir
Thank you for a very clear explanation
Thanks for appreciating the content Swaroop
Do watch all the videos on drawing and mechanics......
And also let your your friends know about this Channel so that they can also benefit.......
How do we determine which distance to be which, I mean you took 50 mm to be the vertical line and 30 mm to be horizontal. This is not explicitly mentioned in the question, so can we swap them and take 30 mm vertical and 50 mm horizontal?
Yes u can....
Even i had the same doubt when i first came across this problem.....
Good question though.......
thank u so much sir
Sir how u take only 10 points
I am praveen. I am diplama first year student.your channel is very helpfull for me.for EG subject. Please teach about a orthographic projection also
Topic-wise Playlist of Engineering
Drawing / Engineering Graphics in Hindi
1.
Orthographic Projection in Hindi: th-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2.
Projection of Point in Hindi: th-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3.
Projection of Line in Hindi: th-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4.
Projection of Plane in Hindi: th-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5.
Projection of Solid in Hindi: th-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
Topic-wise Playlist of Engineering
Drawing / Engineering Graphics in English
1.
Orthographic Projection: th-cam.com/video/WG6H2pISUzQ/w-d-xo.html
2.
Projection of Point: th-cam.com/video/fK4h5gM73w8/w-d-xo.html
3.
Projection of Line: th-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
4.
Projection of Plane: th-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5.
Projection of Solid: th-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6.
Section of Solid: th-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7.
Development of Surface: th-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8.
Auxiliary Plane: th-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9.
Interpenetration of Solids: th-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10.
Isometric Drawings: th-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11.
Conic Sections: th-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12.
Cycloidal Curves: th-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13.
Involute:
th-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14.
Plain Scale and Diagonal Scale: th-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15.
Complete Engineering Drawing in one single
Playlist: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Sir please tell how to draw tangent & normal to this rectangular hyperbola
There is a condition that we have to draw within 10mm in the question .
U have not done it in drawing
Sir is this orthogonal assymtotes method
Can you write my exam in my semester 1
This is very useful for me thank sir
Thanks Shivam......
Do watch all the content on drawing and mechanics.....
And do tell your friends about this channel so that they can also benefit.....
All the best
If I have not dimensions 30 and 50 ,so can we draw hyperbole by this method....
This method can only be applied when u know the coordinates of any one point on the hyperbola
Ok, sir
Thank you, so much.
Sir tangent and Normal ki bhi method bataiye please
How to draw tangent in the above step
Sir make a video how to draw tangent and normal to rectangular hyperbola
Good way of explaining .....!!!! Question...
Hi Sanghahmitra.....
Thanks for appreciating my work...
Keep watching and do let your friends know about this channel so that they can also benefit....
Manas Patnaik
Off course. ....
This is very useful for us
How to when certain angle is given
Why take 6 points on horizontal line and 4 points on vertical line
You can also change the combination or take even more points than 10
please mention the distance of p to p' in conic section of hyperbola
Sir is these two straight lines are asympotes to the hyperbola??
Thank you so much sir for your excellent teaching
How to draw a tangent and normal to the rectangular hyperbola
sir tq for this nice video
but tell how to draw tangent to that hyperbola sir
Please could explain this in draftsight software
while we are seeing in our book it looks like something.but while your are explaining it's look like very easy.thanks for your explanation.
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): th-cam.com/video/WG6H2pISUzQ/w-d-xo.html
2. Engineering Drawing/Graphics (Hindi): th-cam.com/video/SB83cUaAiCM/w-d-xo.html
3. Engineering Mechanics / Applied Mechanics: th-cam.com/video/Z4WN2Z9okfs/w-d-xo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
5. Theory of Machines: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
6. Machine Drawing: th-cam.com/video/iFCnFUR9Gdc/w-d-xo.html
7. Engineering Drawing for Engineering Services Prelims: th-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: th-cam.com/video/0fejUC79LZY/w-d-xo.html
9. Manas Speaks Series: th-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
th-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
Sir will u please tell me how to draw tangent and normal
How to draw normal and tangent in rectangular hyperbola
Sir how to draw a tangent to it
Sir iska hindi videok
Ka link bhej digiye
Thanks sir
A very clear explanation sir thank you
Thanks sir it's very useful to me
Hi Raju....
Thanks for appreciating my work....
All the best in life...
And do let your friends know about this channel so that they can also benefit....
Can we use line dividing in fro the points
Sir, are we can draw tangent and normal line in this conic section- hyperbola. If yes than how?
In this you don't need to draw it as it hasn't been mentioned in the problem.
@@ManasPatnaikofficial thanks you for instant your reply but sir if in some questions is mentioned to draw tangent than how we can draw.
I cannot write that in words.
Will have to give u all a demonstration by making a video
@@ManasPatnaikofficial ok sir and thank you.
Thank you so much sir
How to draw normal for rectangular hyperbola
sir which is this software that you use ?
tangent how to draw sir
Excellent explanation sir, thank you very much
Tangent and normal to this problem sirr?
There is a separate video. You can access it from below:
Welcome to the "The Library of Manas Patnaik"
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in English
1. Orthographic Projection: th-cam.com/video/WG6H2pISUzQ/w-d-xo.html
2. Projection of Point: th-cam.com/video/fK4h5gM73w8/w-d-xo.html
3. Projection of Line:
OLD:
th-cam.com/play/PLIhUrsYr8yHz_FkG5tGWXaNbIxVcibQvV.html
NEW:
th-cam.com/video/pzE0D-Ijxd4/w-d-xo.html
4. Projection of Plane: th-cam.com/play/PLIhUrsYr8yHx7TVB51jN3HZVyW3R6RiBg.html
5. Projection of Solid: th-cam.com/play/PLIhUrsYr8yHxARPzEFz1nXgt8j6xF_tEm.html
6. Section of Solid: th-cam.com/play/PLIhUrsYr8yHwAbiCATZUbzd_CpF0EHF3v.html
7. Development of Surface: th-cam.com/play/PLIhUrsYr8yHwdB96ft6c0Uwc4SDCLuG1v.html
8. Auxiliary Plane: th-cam.com/play/PLIhUrsYr8yHxHWk2TCg1SrphF1vKpHXoB.html
9. Interpenetration of Solids: th-cam.com/play/PLIhUrsYr8yHyTGceE1TGhCSxxfHyFpnNM.html
10. Isometric Drawings: th-cam.com/play/PLIhUrsYr8yHxVky7bfrnbRcdXcHjT_K83.html
11. Conic Sections: th-cam.com/play/PLIhUrsYr8yHx0TuqsY0FUZ7Z24BbKxJoQ.html
12. Cycloidal Curves: th-cam.com/play/PLIhUrsYr8yHwwA8eBea78pJW1lw9XAv6z.html
13. Involute:
th-cam.com/play/PLIhUrsYr8yHzu8pqYvGwQoJKVpuS1Jusa.html
14. Plain Scale and Diagonal Scale: th-cam.com/play/PLIhUrsYr8yHwTgo_zu_ELqOC1ypcp5Gr9.html
15. Complete Engineering Drawing in one single Playlist: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Topic-wise Playlist of Engineering Drawing / Engineering Graphics in Hindi
1. Orthographic Projection in Hindi: th-cam.com/play/PLIhUrsYr8yHy3chHVzYA4BMbY9DbhyYSY.html
2. Projection of Point in Hindi: th-cam.com/play/PLIhUrsYr8yHwinNUxVA1NW0xxLRlDfINH.html
3. Projection of Line in Hindi: th-cam.com/play/PLIhUrsYr8yHyvWb87YtG3A3jDEnChgzir.html
4. Projection of Plane in Hindi: th-cam.com/play/PLIhUrsYr8yHxj9N5e1oZA0x_k5ZVssf3U.html
5. Projection of Solid in Hindi: th-cam.com/play/PLIhUrsYr8yHylYPjrulRGm8DSPiimxP3P.html
6. Scales Hindi-Urdu:
th-cam.com/play/PLIhUrsYr8yHzJA426HjlEmiRqUkJTkozB.html
Topic-wise Playlist of Engineering Mechanics / Applied Mechanics / Fundamentals of Mechanical Engineering in English
1. Forces:
th-cam.com/play/PLIhUrsYr8yHzoyUutEK57JzWy1n-vxIS0.html
2. Friction:
th-cam.com/play/PLIhUrsYr8yHwY1TDraJpyYkU8Zug-kM4m.html
3. Shear Force and Bending Moment: th-cam.com/play/PLIhUrsYr8yHy1lc0hEhbpEAGsGwNmUWt7.html
4. Trusses:
th-cam.com/play/PLIhUrsYr8yHwIXEt9cqjEsEO8l83xcIf7.html
5. Centroid and Centre of Gravity: th-cam.com/play/PLIhUrsYr8yHzZ52dVA3wQ_0IQVl7CKL7p.html
6. Moment of Inertia:
th-cam.com/play/PLIhUrsYr8yHw8qWxAVOx-5Y2XfGPOmcDy.html
7. Dynamics:
th-cam.com/play/PLIhUrsYr8yHwOZxmY63A_lURu6c-jNk-z.html
8. Complete Engineering Mechanics / Applied Mechanics in one single Playlist: th-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
Complete Playlist of ENGINEERING SERVICES EXAMINATION:
th-cam.com/video/ca5IwhrCNbQ/w-d-xo.html
Complete Playlist of Machine Drawing:
th-cam.com/video/iFCnFUR9Gdc/w-d-xo.html
Complete Playlist of Theory of Machines / Kinematics of Machines / Dynamics of Machines:
th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
Thanks 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
In Kannada explain with a great job
Really really easy to understand..Thanks ✌
Super explained sir
Tnx sir simply explained
Best video for ed
Pls tell us hindi
Sir aapki English bhi hindi ki tarh lagti hai .
I am lucky, because i have found your tutorial.
Thank you sir
very thanks Sir it's very useful me
Tq so much sir
And vice versa
Abe hindi me pada n
Excellent sir
Sir Really Amazing Explaination... And Your Videos Are Awesome...
Sir And Also How Explain How To Draw Tangents To It..
Tangent normal video is separate ashok.
You can watch it in the conic section playlist
Thank You Sir
Tanget and normal how draw sir
find directrix
Sir your engineering curves are too good and neatly explained in your video. Made it easy for everyone !!! 💐💐💐😃😃😃
Thanks a lot 😊
Do share it with your friends also.
Sir very nice
Legendary explanation
🤗🤗🤗
Engineering Drawing | Engineering Graphics |: th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
Thanks sir