Trex450L Dominator Frame Assembly Part 2 of 2
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Here is the build of the Align Trex 450L Dominator. This model build has two parts for the Frame Assembly, this is part 2 of 2. I will post the Tail Assembly video finishing the structural build of the helicopter shortly. Last will be a setup video showing the basics on getting your Trex 450L ready for flight. This video is provided as a supplement to the manual. It should be viewed in conjunction with your owners manual.
Thanks for watching!
Contents included in kit:
●T-REX 450L DOMINATOR Set X 1 set
●3GX Flybarless System X 1 set
●360 3G Carbon Fiber Blades X 1set
●RCE-BL45X 45A Brushless ESC X 1
●460MX Brushless Motor(1800KV) X 1
●DS430M Digital Servo X 3
●DS525M Digital Servo X 1
Specification:
●Length: 705mm
●Height: 205mm
●Width: 110mm
●Main Blade Lenght: 360mm
●Main Rotor Diameter: 804mm
●Tail Rotor Diameter: 171mm
●Motor Drive Gear: 11T
●Main Drive Gear: 121T
●Autorotation Tail Drive Gear: 106T
●Tail Drive Gear: 25T
●Drive Gear Ratio: 1:11:4.24
●Weight(w/o power system): 730g
Radio transmitter and electronic equipment required for assembly:
1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1100~1400mAh battery x 1
Regards,
Jeff Fassbinder
Align
www.align.com.tw
www.alignrcusa.com
www.youtube.com...
www.youtube.com...
No matter how many times I build an Align helicopter its always nice for a build video. Amazed by the updates to the 450L Dominator!! Helped me build my one a bit quicker and cant wait to fly her!! Thanks Jeff!!
Part 3 !!!!!!
Tail and set up. Needed.
Thanks
Hi, thanks for the video, this is a great help with the assembly as I am getting mine delivered next week and it'll be my first 6ch radio with no experience with setup whatsoever. I was hoping if you could also do a video for electronic set up please. Thanks again for the great video
please can you post a video on tail part? I just got the dominator and its my first build your videos are very helpful.
You need to do the video again but have the camera show the whole thing.....
Hello just finish building my 450L, and i order the new DX9 - do you have a video or some documentation/info on what will be a good starting setup for the radio, im a intermidient not 3d yet....
best regards.
Where's the third video (tail)?
jesus... from 21:00 to 23:00 everything hes doing is off camera.. SHOW WHAT YOURE DOING!!! its still impossible to tell how you get the boom mount inside the frame. and the manual doesnt say how to do it.
I think the way they installed it was an afterthought. I ended up centering the aluminum rods in it and flexed the frame just enough to fit it in.
Definitely should have went in before both sides of the frame were fastened though.
most part of the video I can't se the helicopter centered on the screen! :(
Next time you make video. Use a monitor. Most of it is out of sight,. You probably forgot to adjust the camera, still in close up.
Can you make a Video for Programm the esc whith throttel lern in :-D
u need 2 re do the video so we can see
your video not in center
Gabriel, can you e-mail me with any info you have found ? I also need help with the 450 L and DX9
Thanks
If you get paid by Align for making this video you should remake it to deserve your money. Most of action is out of camera view. What a shame.
If it's just volunteering it's a good job. Thanks.
what is an Alivator? :)
Can't see anything of the build. Not worth wasting 50 minutes of your life watching this.
Terrible Video can't see anything.