My Rusty ran 76mph on the stock tires, and 81mph on the Slash sct tires. Running the stock soggy suspension, I've have never tested any other tires. I do love the Rusty vxl though!!! AWESOMENESS on this back to back run!!! 😎
That was great 👍 I have the 2wd vxl but I think I need some speed run wheels/tyres ! Nice to know what mine is capable of with speed gear, thanks for your upload 👍🙏🐈
@@UDRC85 how do I get my rustler 2wd from spinning out when I hit throttle? Do I have to pull trigger soft and then start to pull it more once it starts to go faster?
@@UDRC85 I don’t have a slipper clutch kit I eliminated it and just put a pinion on the slipper clutch shaft with a pinion on the motor shaft now i have direct power i also locked the differential with a spool locker
@@rclunatic then you will have to adjust the pull with the shock spring and shock oils. Make sure the camber are even on each side and if the car pulls to the left on take off adjust the right rear spring tension down or crank it down a little turn at a time.
Hey man this was awesome to watch! I just ordered the gearing and I'm trying to scope out a good spot. Definitely need good vision for something like this! Can I ask if you added weight to the front? This car has wayyyyy to much weight in the back, I'm planning on zip-tieing some lead fishing sinkers to the front somewhere, but I don't want to slow it down.
I'm finding mine to be way too light in the front to be stable at high speed. If it ever stops raining here I'm planning to add weights in 1 ounce increments to the front and run it.
How did you figure out the rules for the 70 mile an hour Club I'm working on my Rustler and want to make sure when I do it I do it right if you don't mind saying
I've completely modified my own widen the body just enough by putting a carbon fiber plate across the the upper chassis to place a Max 5 and put in a TP 4070cm 2200kv 8s motor. It is extremely fast and powerful for the size. Since I only widen the body enough with the Carbon fiber plate to fit large batteries and the Max 5. It just a little larger than original but extremely fast and powerful. I don't have the space to really run it any where near it's potential. I've only gone up to 81mph. I however have gone 70mph near 40 times with ease.
Damn bro. I just picked me up a nitro rustler and slapped that 3.3 in it, I can't get the top speed cause it lifts off approaching full throttle. What has to be done to make it 70mph+ capable? I'll pick one up tomorrow 💯🤞🏾
I have some weights on the front, pull slow on the throttle and gear it to the moon 🤣. The box has the gearing info with speeds you can hit with the gearing.
@@federicogastonlara199 my fault I have other rustlers also. This one I would have to look but it seem like 6 wheel weights. I have to go to my storage to find this car and see the weights.
Can you out in a lost the mods you have I just bought a new traxxas rustler 2wd I'm tryna get it up to 70 I know I need a motor some lipos and a fan but what else
I used the stock system in mine. Lower the car by moving the shock to a different location, look on the box it tells you what gears you need to go fast.
Hell yeah man this really makes me wanna fix up my old rustler and get it back on the road!!
Yes sir do it bro. It was a lot of fun. 💪🏾💯👍🏾
Good run fam! Congratulations on the 70+mph Club 💪🏾💯
I appreciate that bruh. She has a little more in it but could not hold it. Lol
Good run bro.
My Rusty ran 76mph on the stock tires, and 81mph on the Slash sct tires. Running the stock soggy suspension, I've have never tested any other tires. I do love the Rusty vxl though!!! AWESOMENESS on this back to back run!!! 😎
Awesome run bro. Sheees rollllin...
Thank you so much. I had a blast. 👍🏾
Congrats for the 70+ club. Great video
I appreciate that brother.
Looking good Brother 👍🏾
I appreciate that.
Very cool 😎 nice save 🙏💯💯
Thank you very much Earl! Was definitely a great challenge. The rustler 2wd is still one of my favorites.
That was great 👍 I have the 2wd vxl but I think I need some speed run wheels/tyres ! Nice to know what mine is capable of with speed gear, thanks for your upload 👍🙏🐈
You are welcome.
@@UDRC85 how do I get my rustler 2wd from spinning out when I hit throttle? Do I have to pull trigger soft and then start to pull it more once it starts to go faster?
@@rclunatic yes that’s one way. You can also loosen the slipper clutch a bit.
@@UDRC85 I don’t have a slipper clutch kit I eliminated it and just put a pinion on the slipper clutch shaft with a pinion on the motor shaft now i have direct power i also locked the differential with a spool locker
@@rclunatic then you will have to adjust the pull with the shock spring and shock oils. Make sure the camber are even on each side and if the car pulls to the left on take off adjust the right rear spring tension down or crank it down a little turn at a time.
Congrats 🎉🎉🎉
Appreciate that bruh.
Bro so happy for u that’s amazing for 3s bro love ur car and videos bro
Thank you very much. It was an awesome experience with this challenge. 💪🏾💯👍🏾
@@UDRC85 amazing bro hope to watch the next video soon bud
Hey man this was awesome to watch! I just ordered the gearing and I'm trying to scope out a good spot. Definitely need good vision for something like this! Can I ask if you added weight to the front? This car has wayyyyy to much weight in the back, I'm planning on zip-tieing some lead fishing sinkers to the front somewhere, but I don't want to slow it down.
Ooops looks like I was logged in as my wife. That was me lol.
@@austinmontanti5975 I added a little weight to the front. Sticky wheel weights.
Awesome job nonetheless
Awwsome...shes screaming 👍👍👍👍👍
That thing is a monster bro 😀
I appreciate that.
I see you bro Congrats!
Thank you very much.
Great run bro....u got it 👍🏾💪🏾💯
Thank you brother. She move out well.
i know i’m late but how did you get it so fast? what the upgrades
How did you get those 17mm wheels on there?? And what brand of wheels are they?? I'd like to do that setup
@@darrincelendano2676 get the Traxxas 2wd 17mm hubs or hot racing, powerhobby 17mm hubs for rustler 2wd and the wheels are BSR foams pink I believe
@UDRC85 right on Thank u
Nice runs congrats
Thanks brother. It was very fun.
What wheels do you recommend that I should get is my priorities are to not drift everywhere from having a pair of wheel for only a week 😂
I run these bsr foams with 17mm adapters. Or run jaco foams. Not sure if you are looking for drag or speed run tires, if so the. These will work.
Nicely!
I appreciate that.
So I’m looking at today’s version rustler vxl 2wd out of the box will it have a hard time staying on the street?
They are fun, it should stay on the street. Them tsm does great with keeping the rustler straight.
I'm finding mine to be way too light in the front to be stable at high speed. If it ever stops raining here I'm planning to add weights in 1 ounce increments to the front and run it.
hey i would love to know where u got the tires from for the rustler i want to run them aswell and would love some help ! great video
They are bsr foam pink compound. You can get them from most hobby store or online. 17mm hubs.
Which foam tires are you using. Thing is fast 💨!
Congrats my brother 👊 well deserved you did it back to back 💯 going to have Rocbud43 confirm and you should be in the club looks good to me 💪
I appreciate that brother. If I need to run it back I have not switch the car back to drag so I’m ready. I just might be faster too. Lol
Check mine out my G
Great Video👍 I subscribed
Thanks for the sub!
Great job 👏
Thank you! 😃
Awesome speed passes
Thank you very much brother.
What is that you use to track the speed. I would love to get that.
Powerhobby gnss
@@UDRC85 ok thank you. I could use it on my rcs and snowmobile.
Is there a reason for the esc more in the middle?
What tires are those
How did you mount the esc???
What gearing
Can’t wait to be in the club hit 63 today I’m slowly gaining but for where I’m running it at I’m lucky to hit 63
🤣
Nice one dude🔥💪 i’m going for 100 on my rustler
Nice bro. Go for it.
@@UDRC85 ohhh yeah. What wheels are thoes?
@@oscar_rc_basher7038 bsr foams pink
@@UDRC85 ok thanks
How do you get it to go straight?
How did you figure out the rules for the 70 mile an hour Club I'm working on my Rustler and want to make sure when I do it I do it right if you don't mind saying
My guy Rc fun posted it a few months ago. Here is the link to the vid. It’s a fun challenge. th-cam.com/video/byNet-YYdlQ/w-d-xo.html
For that set up I would use grp foams no grip for lightweight cars
where are those tires from.
They are bsr foams 17mm
@@UDRC85 thanks
Where u got that wheelie bar looks way better than this traxxas ones
You can get them from a main hobbies. The are the proline stinger wheelie bar
@@UDRC85 does it fit the rustler without modifications
@@lorent0591 yes it does. Bolts right up.
@@UDRC85 thanks mate. Gonna try it with mine
Awesome job! Is this a 2WD Rustler Challenge only?
Thanks brother. Yeah it’s a 2wd rustler challenge. I had a blast. I need more room but I got it done without crashing it.
What wheels are those?
Bsr foams.
I've completely modified my own widen the body just enough by putting a carbon fiber plate across the the upper chassis to place a Max 5 and put in a TP 4070cm 2200kv 8s motor. It is extremely fast and powerful for the size. Since I only widen the body enough with the Carbon fiber plate to fit large batteries and the Max 5. It just a little larger than original but extremely fast and powerful. I don't have the space to really run it any where near it's potential. I've only gone up to 81mph. I however have gone 70mph near 40 times with ease.
Most definitely. You have a killer setup. I enjoy the rustlers. They are fun and cheap but very versatile.
@@UDRC85 They are. Putting a 5th scale system on a 10th scale vehicle means it' way over powered. I like to over power them.
@@Tejaye777 that’s awesome. Especially if the car can take it.
Which gearing are you running 31-76??
What tires are those?
They are BSR foams pink compound
Damn bro. I just picked me up a nitro rustler and slapped that 3.3 in it, I can't get the top speed cause it lifts off approaching full throttle. What has to be done to make it 70mph+ capable? I'll pick one up tomorrow 💯🤞🏾
I have some weights on the front, pull slow on the throttle and gear it to the moon 🤣. The box has the gearing info with speeds you can hit with the gearing.
Whet gearing r u running
What tires are they????????
bsr foams pink
how much weight did you add forward?
I did not add any weights to the car.
@@UDRC85 the aluminum leads you have ahead
@@federicogastonlara199 my fault I have other rustlers also. This one I would have to look but it seem like 6 wheel weights. I have to go to my storage to find this car and see the weights.
And you didn’t do anything besides tires?
Can you out in a lost the mods you have I just bought a new traxxas rustler 2wd I'm tryna get it up to 70 I know I need a motor some lipos and a fan but what else
I used the stock system in mine. Lower the car by moving the shock to a different location, look on the box it tells you what gears you need to go fast.
What Tires are you using?
Bsr foams.
What’s the gearing ???
What the hell did you put in this car lol? Trying to upgrade mine hardcore
What's the name of the tires
It’s bsr foam tires.
My rustler only goes 52 you don’t know why I have gearing 21 t help pls
Are you running the Vxl and 3s lipo
Nice pass dude but go check out my rustler it’s the worlds fastest 2 Wheel Dr. rustler VXL
I can do 70 with just the top speed gear ⚙️