Amazing. Ford Focus 2009. Changed the battery on the key fob, but still didn't work until I followed this to reprogram the key. Thank you SO MUCH. (I think I turned it back and forth 8 times, but I might have lost count!)
I was down to one remote key and a transponder only key. Got a spare key fob from a scrapyard and hey presto it’s that easy, I did both remote keys with transponder key operating the ignition. Thanks amd a great saving.
Thanks for the video. It took a few tries but it works. You need to go between I and II, not between II and III because III starts the car! My car, a Mondeo, took 5 times to get the programming mode. Then pressing the buttons has to be done right. Definitely saved me a few bucks!!!
Glad it helped. On the C-Max the numbering might be a bit different but remember to do all keys at the same time as it could wipe working keys from the car when adding a new one.
so glad that you made this video. I was really stressing out and couldn't figure out why it wasn't working after changing the battery in the fob. thank you again for making this video.
Life saver! Other videos might show you how to change the battery, but this was the first I found that showed me how to make the fob work again on my 2010 Ford Focus. Thank you very much **Thumbs Up**
@@alexchalloner6216 - Can't remember, it was such a long time ago. What I can say is I got it to work, so it can't be too difficult =) Hope you got it sorted **Thumbs up!**
Hello, maybe you can watch my video and develop a new idea! Here is a video of me using a diagnostic device to match the key fob for Ford: th-cam.com/video/9s3N3xBudJM/w-d-xo.html , you can watch it, it may help you. There are more videos on my homepage, welcome to watch and follow
Hello, maybe you can watch my video and develop a new idea! Here is a video of me using a diagnostic device to match the key fob for Ford: th-cam.com/video/9s3N3xBudJM/w-d-xo.html , you can watch it, it may help you. There are more videos on my homepage, welcome to watch and follow
Why in the world did the handbook not mention this in the key fob battery change instructions? Well, at least you did, and a video is much clearer than writing anyway. Thanks ;-)
That's a great saving for you. It's always great to be able to resolve an issue yourself for free rather than paying money, especially when it is a simple solution. Happy to have helped. Don't forget to like and subscribe 👍🏼
This worked really well for me, albeit on my Focus Mk2 Zetec. Had to toggle between positions I & II (III sparks the engine) and then press the unlock button...hey Presto! Had to do this after replacing a dead battery. Many thanks for the help.
Thank you very much for the video. It's working as you describe. Only for my Smax I have to repeat 8 times before I heard the beep. Thank you once again for your help.👍
Many thanks and really happy it end up working for you. The combinations of turns seems to vary between years and models. It would be fantastic to have a definitive list to help everyone. Don't forget to like and subscribe 👍🏼
Really happy that the instructions were of help to you and also easy to follow. Things like this can be a bit difficult to follow so tried to make it as simple as possible :)
I will try this .. my key dosent work.. like i unlock my car then when i want lock up dosent work anymore.. i swap the key batery and still dosent work
Hello from Argentina! I have a question: I had the same problem, abandoned key and no battery for a long time. I replaced the battery and I need to program my key, but my ford is different, it turns on from a single button in the center of the console, what do I have to do?
Hi, is it fully keyless ignition or is the option to insert key there also? There might be a different process if no key available but not sure about that sorry. Don't forget to like and subscribe
Hi Julian, as long as you are in the car then you can program the key without a master as it captures a new signal during the process demonstrated in the video. You do however need to make sure you have all keys present to press to capture codes if there are more than 1. Don't forget to like and subscribe!👍
Hello, maybe you can watch my video and develop a new idea! Here is a video of me using a diagnostic device to match the key fob for Ford: th-cam.com/video/9s3N3xBudJM/w-d-xo.html , you can watch it, it may help you. There are more videos on my homepage, welcome to watch and follow
good video, i have just bought a c max with only one key, is there any way to code a spare for the immobiliser in a similar way or do i need to get a locksmith to do it when they cut a new key? sorry if you have been asked this before
My understanding is that the process shown in the video will pair the keyfob to the car, so hopefully you can try this when cut, or even before. Never tried to pair a brand new key but it should work and pair the signals on the key to allow it to be used on the current car.
I can confirm it works with a brand new fob. I bought a cheap 433mhz key fob on eBay and was able to pair it to my c max. Saved myself a fortune. Timpsons quoted me £179
I have two keys.. used your video to programme the key that wasnt working after a battery change. However, when one key programmes - the other one stops working. Then programme again and then that works and the other stops. Any solutions?
Hi, yes, the solution to this is when you program the one key, press the buttons on the second at the same time of programming the first and it will grab the signal for both keys during the programming stage. Don't forget to like and subscribe! 👍
Hi, that's what you would think but the toggle is actually between 2 and 3. Ignition on is beyond 3 so you have to turn past 3 to start the car. Hope that helps 👍🏼
@geethakrar many thanks for the video. I bought replacement key and transferred the inner electrical board over and had to get the key shaft recut. The reprogramming works for remote unlocking but won't actually start the car . Is there something missing from the new key shell ? Many thanks
It can be quite hard to see and line up the markings, but it is correct. It might be down to movement in the barrel possibly but glad it worked for you 🙂 Don't forget to like and subscribe! 👍
Hi, sorry but not sure about the process for this as the one I've explained is for a key operated option. There may however be a similar sequence if you have the option to insert a key. Good luck with it
Does anyone know how to reprogram the key for a 2008 Ford Kuga with keyless entry? Mine was not used and the battery ran out. Now replaced it no longer opens the doors or start the car
Hi, this should work fine for cars of the same or similar year as the programming mechanism and sequence is done at the car side and the signal of the key is captured. Don't forget to like and subscribe 👍🏼
Hi there, to get botg/all keys activated, press the buttons for all during the time when it is able to register new a new key(s). This will be after the key turns and when the car bleeps, at the point in the video where you see me press the key buttons and it locks/unlocks the doors. Don't forget to like and subscribe 👍🏼
That's odd - I didn't have that issue. Maybe you could try and use one key to carry out the steps and when it recognises the key then press buttons on both keys to allow the car to record both of the keys signals? Hope you get it sorted
Hi, please can you tell me what to do after you've turned the key from position 2 to 3 four times. I couldn't hear what you said very clearly. Thanks very much : )
After you alternate between the 2-3 position you will hear a bleep then you press the buttons on your key. The number of times may vary depending on the car you have. Hope this helps.
My second key unlocks/locks the car, but won't start the ignition. What's causing this and how do I fix it? My other key starts the car with no issues, so it's not the cars problem. Something is wrong with the second key, the display in my 2013 fiesta says key not detected.
Yes, the function to update the key will be the same, but make sure you have all the keys present to link the codes together. Just press the button on all remotes after the ignition turn. Don't forget to like and subscribe
THX ! helped me alot =- my auto have to forget my key just aftel lock , ur tutorial help me to tech auto remote kay to know back again . Ford S-MAX 2008
Hi Gee Thakrar thank you very much for video it did help me straight away I was struggling since yesterday. But now I am not cheers. Kind regards. Ilyas patel
Amazing. Ford Focus 2009. Changed the battery on the key fob, but still didn't work until I followed this to reprogram the key. Thank you SO MUCH. (I think I turned it back and forth 8 times, but I might have lost count!)
That's awesome, so happy it helped you out. Don't forget to like and subscribe 👌🏼
I was down to one remote key and a transponder only key. Got a spare key fob from a scrapyard and hey presto it’s that easy, I did both remote keys with transponder key operating the ignition. Thanks amd a great saving.
Fantastic news and happy to help. Don't forget to like and subscribe 👍
Just saved my day 2010 Ford Focus had to turn it back and fourth 6 times but it worked. Thanks.
That's awesome. Really glad that the video was of help to you 👌
Thank you very much from Spain. Thanks to your video I solved the problem with the central locking of my car.
That's awesome, really happy to hear that it helped you out. Don't forget to like and subscribe 👍🏼
Wife car had the same issue, new battery in key fob, no joy, carried out this reprogram and working perfectly again! Many thanks!!!!!
That's great to hear - glad that it was of help to you :)
@@geethakrarjñiool
Impío
Thanks for the video. It took a few tries but it works. You need to go between I and II, not between II and III because III starts the car! My car, a Mondeo, took 5 times to get the programming mode. Then pressing the buttons has to be done right. Definitely saved me a few bucks!!!
Glad it helped. On the C-Max the numbering might be a bit different but remember to do all keys at the same time as it could wipe working keys from the car when adding a new one.
And Fiesta took 6 times to get programming mode.
Which buttons should i Press after the first 4 turns in the ignition?
so glad that you made this video. I was really stressing out and couldn't figure out why it wasn't working after changing the battery in the fob. thank you again for making this video.
Really happy to hear that it helped. Don't forget to like and subscribe
I've just fixed mine, thankyou
Glad to have helped. Don't forget to like and subscribe 👍🏼
Thank you, video helped! Someone would want 50€ for fix. Now was completly free! Greeat!
That's great news and happy to help. Don't forget to like and subscribe 👍🏼
شكرا جزيلا يا بطل .
بالنسبة للعرب الذين يبحثون في التعاليق فهذه الطريقة فعالة .
لا تقلق إطلاقا. يسعدني أن أساعدك ويسعدني أن هذا نجح من أجلك. الرجاء الإعجاب والاشتراك 👍
Life saver! Other videos might show you how to change the battery, but this was the first I found that showed me how to make the fob work again on my 2010 Ford Focus. Thank you very much **Thumbs Up**
Really pleased it was helpful for you 👌🏽
was there certain order you had to press the buttons on the fob? I drive a 2010 focus and need to do the same when I pick up a new battery tomorrow😂
@@alexchalloner6216 - Can't remember, it was such a long time ago. What I can say is I got it to work, so it can't be too difficult =) Hope you got it sorted **Thumbs up!**
You are a good my sir
😊 A Big Thank you , its work on first time on my 2009 Ford focus
Glad to hear that it helped. Don't forget to like and subscribe 👍🏼
Coolest woodworking project I have seen in a long time. Well done dude.
Hello, maybe you can watch my video and develop a new idea!
Here is a video of me using a diagnostic device to match the key fob for Ford: th-cam.com/video/9s3N3xBudJM/w-d-xo.html , you can watch it, it may help you.
There are more videos on my homepage, welcome to watch and follow
Bang on no messing straight to the point shown how simple it is to do.
That's awesome, many thanks for the message and really glad to be of help. Don't forget to like and subscribe 👍🏼
Hello, maybe you can watch my video and develop a new idea!
Here is a video of me using a diagnostic device to match the key fob for Ford: th-cam.com/video/9s3N3xBudJM/w-d-xo.html , you can watch it, it may help you.
There are more videos on my homepage, welcome to watch and follow
Right now I tried and fixed the keyremote problem🤩. Thank you so much and greetings from Croatia.
Superb, so glad that it was of help to you 👍🏼
TH-cam is great 👌
Thanks buddy, worked a treat🤙
Awesome, happy to have helped Tony. Don't forget to like and subscribe! 👌🏽
very functional, a short video but very amazing and functional.
Thanks
You're welcome. Glad the video was of help. Please don't forget to like and subscribe 👍🏼
Why in the world did the handbook not mention this in the key fob battery change instructions?
Well, at least you did, and a video is much clearer than writing anyway. Thanks ;-)
Well this how the stealer-ship make their money! 😂
Glad that the video was of help. Don't forget to like and subscribe 👍🏼
It also worked on my 2009 Focus 1.6tdci wagon. Many thanks!!!!
That's awesome, happy it helped you out 👌
Thank you this worked for my 2011 Focus MK2 1.8Si I ended up having to use my Spare key first to initiate the process.
Really glad to hear that it helped you out. Don't forget to like and subscribe 👍🏼
Dude thank you for your video! I went to the garage they said more than 80 euro to reprogram the key. Thanks again!
That's a great saving for you. It's always great to be able to resolve an issue yourself for free rather than paying money, especially when it is a simple solution. Happy to have helped. Don't forget to like and subscribe 👍🏼
@@geethakrar already liked and subscribed. You deserve it. Thanks again!
Thank you! Worked perfect 2010 Ford focus
That's great news, happy to help. Don't forget to like and subscribe 👌🏼
This worked really well for me, albeit on my Focus Mk2 Zetec. Had to toggle between positions I & II (III sparks the engine) and then press the unlock button...hey Presto! Had to do this after replacing a dead battery. Many thanks for the help.
yep me too, although i didn't get the beep after a couple of times, so i dont know how many times i toggled between I & II :) but hey it worked.
Sorted my cmax keyfob easily. Much appreciated 🙏 thanks
That's great news. Really happy to help. Don't forget to like and subscribe 👍🏼
I have seen some bullshit videos on this, but amazingly this was spot on, thanks mate really appreciated 👍
Thanks Michael, an awesome message 👌🏽
Really glad it worked for you. Don't forget to like and subscribe 👍🏼
Thx!It really works!Much appreciated...
That's awesome news, many thanks. Don't forget to like and subscribe 👍🏼
Thank you very much for the video.
It's working as you describe. Only for my Smax I have to repeat 8 times before I heard the beep.
Thank you once again for your help.👍
Pleased to hear that it worked for you 👍🏼
Thanks for this. Worked a treat albeit I needed to do it eight times but the point is that it was very helpful to be able to reprogram our second fob!
Brillaint thank you. My spare kept not been used for ages and battery died and lost its program. Worked first time. Although it’s position 1&2
Happy to have helped. Don't forget to like and subscribe 👍🏼
Thanks this worked a treat. On our Cmax it was cycling between 1 and 2 I think in the end that did it
That's awesome! Happy to help. Don't forget to like and subscribe 👍
Puuuf muchísimas gracias tu video mi ha servido muchísimo
Realmente feliz de que esto te haya ayudado. Por favor no olvides darle me gusta y suscribirte. 👍
Is that Lors Ganesh Idol near to your car ignition?
Hi, yes it is indeed 👍
I love you so much! My fob working, one thing only, made 4 times from 1st position to 2nd position.
Many thanks and really happy it end up working for you. The combinations of turns seems to vary between years and models. It would be fantastic to have a definitive list to help everyone. Don't forget to like and subscribe 👍🏼
Thank you bro. Works perfectly
No worries at all - happy to help. Don't forget to like & subscribe!
Thank you so much. It worked perfectly for my focus tdci mk2 2.0 2010. Happy new 2021.
Lovely to hear that it helped you out, HNY 👍🏼
Worked first time Thank You
Glad it worked and happy to help. Don't forget to drop a like and subscribe 👍
Oh great! It works for my 2010 Focus as well!
So happy to hear that it helped you out. Don't forget to like and subscribe 👌🏽
thank you very much sir I just had this problem and now with your help I'm very satisfied
That's awesome. Nice to read positive comments that the video helped others also.
Brillianton my focus just changed battery. Works now after your video 😊❤
That's great news. Happy to have helped. Don't forget to like and subscribe 👍🏼
I saw how you programmed key for c max , was well impressed how easy it was to follow your instructions. I got my car working , thank you
Really happy that the instructions were of help to you and also easy to follow. Things like this can be a bit difficult to follow so tried to make it as simple as possible :)
If you wanna doit on a focus mk2, do the same but from 0 to II instead.
Ah, many thanks for the pointer, much appreciated :)
Thank's you
Big help for me my ford focus 2011 hatchback works now
That's awesome news! Happy to have helped. Don't forget to like and subscribe 👍🏼
Work very good
Happy to help. Don't forget to like and subscribe 👍🏼
Thank you very much worked straightaway
Really happy that it worked and to have helped you out. Don't forget to like and subscribe 😊
good tutorial. This procedure also applies to some other fords of this generation.
Thank you mate your video was very. Helpful and you've saved me money 👍👍
Really good to hear that it helped you. Don't forget to like and subscribe 👍🏼
Thanks alot mate
Happy to help. Don't forget to like and subscribe 👍
This works, just make sure you start the car after the beep. Then test the locking buttons 👍🏻
Happy that this was of help to you 👍🏼
Thank you!! It worked straight away, so quick and easy, appreciate this video 🙏🏻
So happy to hear that it helped you out 👌🏽
Thank You Very much one million, you saved me, huge help. I subscribed your channel und liked your great video.
Lovely comment and really happy to have helped you out 👏
Thanks a lot. Worked from first trial!
That's awesome, really glad that it helped you. Don't forget to like and subscribe 👍🏼
I will try this .. my key dosent work.. like i unlock my car then when i want lock up dosent work anymore.. i swap the key batery and still dosent work
Well done tried this and it worked, thanks a lot
That's awesome, many thanks for the message and really glad to be of help. Don't forget to like and subscribe 👍🏼
Liked and subscribed 👍
Amazing.
It's working my key.
Many thanks 🙏
That's great news, happy to help. Don't forget to like and subscribe 👍🏼
Thank you for this my key has done that and now ave followed your instructions my key is now working 😊👍
That's great news David, happy to hear that it helped you 👍🏼
Thank you it helped me
Really happy to hear that it helped you out. Don't forget to like and subscribe 👍🏼
LIFE SAVER !!!!
So happy to hear that it helped you out 👌🏽
Don't forget to like and subscribe!
Hello from Argentina! I have a question: I had the same problem, abandoned key and no battery for a long time. I replaced the battery and I need to program my key, but my ford is different, it turns on from a single button in the center of the console, what do I have to do?
Hi, is it fully keyless ignition or is the option to insert key there also? There might be a different process if no key available but not sure about that sorry. Don't forget to like and subscribe
Mi dispiace non parlo inglese... Ma ti giuro sei un grandeeeee... Super. Ci sono riuscito❤️❤️❤️
La bellesa de poder traduir en línia! Estic tan content que això us hagi sortit bé i que us hagi agradat. Si us plau, agrada i subscriu-te! 😊
This worked for me thanks!
So glad that this was of help to you :)
Cheers bro, works a treat 👍👍
Really good to hear that it helped you out. Don't forget to like and subscribe 👍🏼
Do you need the master key with the transponder or can you program the new key on its own?
Hi Julian, as long as you are in the car then you can program the key without a master as it captures a new signal during the process demonstrated in the video. You do however need to make sure you have all keys present to press to capture codes if there are more than 1. Don't forget to like and subscribe!👍
TI RINGRAZIO INFINITAMENTE PERCHE GRAZIE AL TUO VIDEO HO RISOLTO IL PROBLEMA ALTRIMENTI CONTINUAVO AD USARE L'AUTO SENZA TELECOMANDO😄
Sei il benvenuto e sono così felice di averti aiutato. Per favore, non dimenticare di mettere mi piace e iscriverti 👍🏼
You are a good sir!
Many thanks for your message, it's much appreciated. Don't forget to like and subscribe 👍🏼
Thank you you are my life saver
Happy to know that this was of help to you. Many thanks for the comment. Don't forget to like and subscribe 👍
Gracias!! Me has salvado jaja.
Thanks, you saved me!! 🤗🤗
Feliz de ayudar. ¡Asegúrate de que te gusta y suscríbete!
Great video… thanks alot for this … worked!!!
That's great to hear, really happy to have helped. Please don't forget to like and subscribe 👍🏼
Thank you so much it’s work 👍👍👍
Really happy that it was of help for you 👌🏽
Teşekkür ederim
Rica ederim. Sana yardımcı olduğum için mutluyum. Beğenmeyi ve abone olmayı unutmayın 👍🏼
Thanks for the video. Great help!
Hi Ryan, happy to help and glad it worked for you. Please don't forget to like and subscribe!
Hello, maybe you can watch my video and develop a new idea!
Here is a video of me using a diagnostic device to match the key fob for Ford: th-cam.com/video/9s3N3xBudJM/w-d-xo.html , you can watch it, it may help you.
There are more videos on my homepage, welcome to watch and follow
Brilliant, thanks for posting , just sorted my remote out on my 2009 smax
Happy to help and glad it worked for you :)
What was the procedure on a smax? I cant get any beep no matter how many times i swich in positions
Very pleased thanks
That's awesome, many thanks for the message and really glad to be of help. Don't forget to like and subscribe 👍🏼
Thank you so much!
No worries at all. Don't forget to like and subscribe! 👍
good video, i have just bought a c max with only one key, is there any way to code a spare for the immobiliser in a similar way or do i need to get a locksmith to do it when they cut a new key? sorry if you have been asked this before
My understanding is that the process shown in the video will pair the keyfob to the car, so hopefully you can try this when cut, or even before. Never tried to pair a brand new key but it should work and pair the signals on the key to allow it to be used on the current car.
I can confirm it works with a brand new fob. I bought a cheap 433mhz key fob on eBay and was able to pair it to my c max. Saved myself a fortune. Timpsons quoted me £179
well thank you 👍👍👍
Glad it was of help. Don't forget to like and subscribe 👍🏼
Thank you. This helped me
No worries at all. Pleased to hear that it helped you out 😊
I have two keys.. used your video to programme the key that wasnt working after a battery change.
However, when one key programmes - the other one stops working. Then programme again and then that works and the other stops.
Any solutions?
Hi, yes, the solution to this is when you program the one key, press the buttons on the second at the same time of programming the first and it will grab the signal for both keys during the programming stage.
Don't forget to like and subscribe! 👍
@@geethakrar That fixed it for both. Thank you so much 😊
@@ash2joker that's great to hear, happy to have helped. Don't forget to like and subscribe 👍🏼
I'm guessing you toggle between 1 and 2, as 3 must engage the starter motor. So between ignition on and ignition off 4 times.
Hi, that's what you would think but the toggle is actually between 2 and 3. Ignition on is beyond 3 so you have to turn past 3 to start the car. Hope that helps 👍🏼
@geethakrar many thanks for the video. I bought replacement key and transferred the inner electrical board over and had to get the key shaft recut. The reprogramming works for remote unlocking but won't actually start the car . Is there something missing from the new key shell ? Many thanks
works perfect, thanks so much
Happy to hear that it helped you. Don't forget to like and subscribe 👍🏼
Thanks dude, you helped me a lot. But you need to turn the key between 0 and 2, a not to 3 as you said. Thank you!
It can be quite hard to see and line up the markings, but it is correct. It might be down to movement in the barrel possibly but glad it worked for you 🙂 Don't forget to like and subscribe! 👍
👍👍👍 thanks for that… it worked for me!
Awesome. Happy to help 👍🏼
Hello. How can the same be done if the machine is operated by a button?
Not sure about button start operation as this method only works on a key operated version. Don't forget to like and subscribe
Thank you
You're welcome - happy to help :)
Cheers bro worked a treat 🔥🔥🔥👊🏼
Awesome, really happy it helped you out. Don't forget to like and subscribe 👌
I have the same problem, but it s a Ford Kuga, which is with start button in the middle of the car. How do i reset ?
Hi, sorry but not sure about the process for this as the one I've explained is for a key operated option. There may however be a similar sequence if you have the option to insert a key. Good luck with it
Does anyone know how to reprogram the key for a 2008 Ford Kuga with keyless entry? Mine was not used and the battery ran out. Now replaced it no longer opens the doors or start the car
Oh well, Sold the lemon of a car. Got me another CRV.
Hey, will this work with a brand new cut key that has never been programmed before?
Hi, this should work fine for cars of the same or similar year as the programming mechanism and sequence is done at the car side and the signal of the key is captured. Don't forget to like and subscribe 👍🏼
@@geethakrar cool thanks a mill
Spare key now works but it has disabled the original key? How do you keep both keys operating
Hi there, to get botg/all keys activated, press the buttons for all during the time when it is able to register new a new key(s). This will be after the key turns and when the car bleeps, at the point in the video where you see me press the key buttons and it locks/unlocks the doors.
Don't forget to like and subscribe 👍🏼
@@geethakrar
Perfect yea as you said i pressed the second key and they now both woth
Thanks so much
Does the same method apply to the mk2 ST keyless entry? since the key dont turn in the ignition
Nope, keyless entry would be a different process, unless there is also the option to have a key inserted on the side.
@@geethakrar Thank you
I got my dead fob to work, but then the spare didn't. I can't seem to have them both working?
That's odd - I didn't have that issue. Maybe you could try and use one key to carry out the steps and when it recognises the key then press buttons on both keys to allow the car to record both of the keys signals? Hope you get it sorted
Hi, please can you tell me what to do after you've turned the key from position 2 to 3 four times. I couldn't hear what you said very clearly. Thanks very much : )
After you alternate between the 2-3 position you will hear a bleep then you press the buttons on your key. The number of times may vary depending on the car you have. Hope this helps.
Struggling to do this for my 2006 ford territory.
Any idea what I'm doing wrong?
Try the same procedure but swapping the number of turns to different amounts. Sometimes more turns work
My second key unlocks/locks the car, but won't start the ignition. What's causing this and how do I fix it? My other key starts the car with no issues, so it's not the cars problem. Something is wrong with the second key, the display in my 2013 fiesta says key not detected.
Sounds like problem with the key or internal code chip. Unfortunately, don't know anything about that.
Thanks for this.
My pleasure
Will this work with a brand new key fob as I've lost mine ?
Yes, the function to update the key will be the same, but make sure you have all the keys present to link the codes together. Just press the button on all remotes after the ignition turn. Don't forget to like and subscribe
Many thanks it worked fine
That's awesome, many thanks for the message and really glad to be of help. Don't forget to like and subscribe 👍🏼
How to program the immobiliser? That's my issue with making my new spare key work :(
Pairing the key using this process should enable the immobiliser to function also, but unsure. Hopefully it will work for you.
Thank you! Sorted me out!
Really glad to have helped
Thanks for the information 👍👍
THX ! helped me alot =- my auto have to forget my key just aftel lock , ur tutorial help me to tech auto remote kay to know back again . Ford S-MAX 2008
Really happy that it worked for you 👍🏼
Hi
Gee Thakrar thank you very much for video it did help me straight away I was struggling since yesterday. But now I am not cheers.
Kind regards.
Ilyas patel
Really good to hear that it helped you out. Don't forget to like and subscribe 👍🏼