thank you so much for showing and explaining what direction the fans should go in when other tutorials skipped out on it completely, this was super helpful for a beginner like me!
Hi Karen, welcome to my channel and thank you for the feedback. Yup I try to do open view based on my self as a end user. By the way This video is part 2. The thermal performance. All the best with your build too 😉
Hello -kl90u- :D , welcome to my channel and thank you for the compliment. You might be interested in this video th-cam.com/video/d2rDgQtX1OM/w-d-xo.html part II the temperature results.
Love this cpu cooler. Its been great for my daughters build which has a intel i7 12700f cpu. Can't wait for the comparisons with the other air coolers.
Hi Rick, welcome to my channel. Yup this cooler is super easy to mount, no hassle, the only thing I will do is to remove those pet sleeve. I dislike them as it’s stiff, other than that, this is a good air cooler.
Hi Earl Lapus, welcome to my channel and do pardon me for the late reply. Just for your info, the performance test is at this video th-cam.com/video/d2rDgQtX1OM/w-d-xo.html once again thank you to have visit and to leave your valuable feedback 😉
Have you tested the Deepcool AK620 yet, if so, how does the this Rev B compare to it? In GamerNexus' video the AK620 seemed to be better than the regular Fuma 2. I haven't seen anyone put this improved version against the AK620.
Hi Mauricio Russa, welcome to my channel and thank you for the feedback. You might be interested of the thermal result of this Air Cooler against others, th-cam.com/play/PLEW-b-2vYDdMnBBLGyRrX4w0SmGCZjyEk.html click on Best Budget Air Coolers. Once again thank you to have visit and to leave your valuable feedback.
Hello jaymasie, welcome to my channel it does not really matter as it’s trying to indicate one sensor of the fan pair, so that the correct rpm will apply on both fans.
I think I put the space with the rubber end facing upwards, is that an issue? I looked at the pictures in the instrutions and thought that was the way it was supposed to go. Also how do you know your retention screws are tight enough? Do you go until it doesn't turn anymore?
Hello DaLeadBull, welcome to my channel. As mentioned, if you are using intel processor, the spacer with the rubber is facing down. If it’s AM4, then the rubber will be facing upwards. As for retention, I have tried two methods but to get the best result is to screw the retention where it stops. You will need to screw down in alternate manner so to get balance pressure.
how does it work with the backplate? Dont CPU sockets usually have like metal parts on the other side of the board so thats why the backplate usually has a cut out middle part? How would that work with a full metal backplate? Unfortunately not shown in video.
Hello Value___? welcome to my channel. this is an AM4 motherboard, using the original backplate. unless you are using intel which i do not have that but did illustrate in the video with a brief discription.
Hi keithX303 welcome to my channel, am sorry to say it did not state you can mount in a LGA 775 socket. It’s only for 2066 2011, 1150, 1151, 1200 and 1700.
Hello Max, welcome to my channel. that's good to hear and thank you for the feedback. I believe some one with a nr200 case will be gald to know your info too. thanks again! 👍
Hello Mert Can Bora, welcome to my channel. You it's a great cooler. If you pair up with high static pressure fans, it rocks. You might be interested to watch this too th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
Hello Rafael, welcome to my channel. You can use the paste that comes with it, not an issue, but there might be a difference in temperature from good thermal paste brands like MX4 or MX6 from Arctic or even other good brands like Thermal Grizzly Extreme. The choice is yours.
Went with the Fuma 2 Rev B to go with my 5900x. I was worried at first. There is so much talk out there about how Zen 3 can get real hot real fast... even though that's just how it's supposed to be or whatever. Nah. My 5900x w/ Fuma 2 Rev B runs cooler in every imaginable scenario than my 3600 w/ Hyper 212 Evo did. All while pulling double the watts. I couldn't recommend the Fuma 2 enough to anyone wondering about it. Absolutely amazing heatsink. It was also the easiest heatsink I've ever installed since it uses the factory AM4 backplate (unlike my previous Hyper 212 Evo).
Hello JustAGuy, welcome back and you are absolutely right. this heatsink does an amazing job.. it's proven as I have tested it.. then unique fin stack made it possible to bring down the temperature but need to pair it with a good static pressure fan to give it's fullest potentiall. illustrated here th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
What temps are you getting? my 5800x is getting 80c while gaming using an Auraflow x240 after using PBO and undervolting. I bought the Fuma 2 hoping to get better temps.
@@albertgarcia986 hi welcome to my channel, am not sure if you are asking JustAGuy but hope you get a good temp with the fuma 2 as I wish I could test those out for you but am not able to as I do not have those PC parts you are having (5800x and Auroflow 240 aio).
Hello K. E., welcome to my channel and thank you for the compliment. You might be interested with the thermal test which you can find in this playlist th-cam.com/play/PLEW-b-2vYDdMnBBLGyRrX4w0SmGCZjyEk.html view the best budget aircooler vid. Once again thank you to have visit. 😉
Hello Inevitable Me, welcome to my channel. yes you can, so long is of 25mm. This is what I did when testing thermal results th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
Hi, i have brand new still in the box older model Fuma 2, SCFM-2000 model,,,,does it fit on AM5 boards and is it good enough for 7800x3d or should I buy other cooler? Thnx,,, subscribed!
Hi Notni4a, welcome to my channel, I have measured physically till the tip of the fan as illustrated in this video. I do not suggest you to get this cooler if your case is 155mm max CPU height clearance. it will be of a better choice to get a case that has a 160mm CPU height clearance. This is my strong opinion.
@@notni4a784 Hi, maybe tell me which case you are using? and do pardon me, I am not very well verse in Air Cooler, just so happened that I was testing three of the best budget in the market. th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
@@KleoYan can u maybe try rechecking the height . I watched lots of reviews and you were the only one saying its 160mm . I would really appreciate a reply
Hi congratulations for your videos that I follow regularly could you help me? I'm having a problem with the scythe fuma 2 rev b that I installed for my Ryzen 7 5700x processor in idle simply by moving the mouse the temperatures go from 32°C to 60°C I don't understand what's going on . In terms of the case I have a Lian Li Lancool 205 Mesh and Msi B550 Tomahawk motherboard I have 2 Crucial Ballistix 2*16GB memory sticks an Asus Tuf RX6700XT graphics card hoping you can help me
Hello macula Binder, welcome to my channel. It’s abit strange by just moving your mouse that it gone up to that high. You might want to check what’s running on the background in task manager.
@@KleoYan I installed the cooler again and it doesn't change anything the temperature goes from 28°C to more than 50°C as soon as I open Chrome it's beyond understanding...
@@marcusbinder890 hi, I got mix up with the processor, in fact is perfectly normally for 30 to 60 degrees. My 5700x does react this way too. Do not worry. My bad. So long it does not hit 75 and above with light load. You should be fine.
@@KleoYan ok bro, thanks a lot, I bought an Aircooler like this for my RYZEN 9 5900x, just waiting for it to arrive to test it 😁 thanks for the answer 👍
@@calisteniavibe you are most welcome. All the best with your build. you wont go wrong with the Fuma 2 Rev B. I should have share with you this video.. I totally forgot about it.. anyway this is tested in a 5950X th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
Hello Muttabor, welcome to my channel and you are most welcome. You might want to watch the thermall results as I compare with other good air coolers. th-cam.com/play/PLEW-b-2vYDdMnBBLGyRrX4w0SmGCZjyEk.html click on Best Mid Range CPU Aircooler.
@@TCGArsenal it should have enough clearance if you are using only 2 dimm slots, as for 4 dimm slots, you might hit the rams side slightly or should I say might be a tight fitting.
HEllo xennos, welcome to my channel. I am not sure about DR2 but will suggest to get Fuma 2 Rev B. If you only use two ram stick, there are enough clearance no issue, same goes to 4 ram stick. just that 4 ram stick is abit tighther but will not hit the Air Cooler, or you can choose to place the fan to your rear. hope that helps.
@@KleoYan You help me à lot becauze too Many brand 😭 My i7 11700f 42 idle, 60 youtube , 92 game. Room 25. Case cooler perfect. I need better one rapidly 😫 Thx buddy 🙏👌
@@KleoYan I have check your another vids and im buying Fuma 2 rev 2 🙂 Thermal paste is incluse in the box ? If not , Artix mx4 good ? Thanks for all 🙂👌
@@Xennnos hi ya, welcome back. Yes it comes with the thermal paste but mx4 is all good too. All the best my friend and thank you for visiting and to reply 😉
Hello Heroic Squirrel, welcome to my channel. Do it evenly as I have illustrated here, I stop where the screw stops as there will be a stop point. Screw it slowly so you don't over tighten it too much!
@@KleoYan hi there, I screwed them fully down but felt it could be too much pressure, so did a few turns looser (evenly as you said) but it’s hard to know for certain what the correct pressure is
@@heroicsquirrel3195 yup. let the retention bracket do the job. as for how much pressure. I always start at the beginner to just thread the screws in as in it lighty hold the heatsink, then apply same quarter tighten rotation on each side till it hits to a point where it does not allow me to screw anymore. I have some feel to tighten and with accuracy. Thats why i can do the comparision with other heatsink. th-cam.com/video/d2rDgQtX1OM/w-d-xo.html . It just takes time to practice. A way to judge, once system up and running, look at the idle temp. if your idle temp is 68 to 72 consistantly, then that is a bad mount.
@@KleoYan thanks for all the information and quick reply, my idle temps are 30c so I think I got it good, hopefully scythes stock paste will be decent until I change to kryonaut or something
Hello Jason Bover900, welcome to my chanenel and thanks for the compliment. Do remember to subscribe and click on the notication button as there will be part II ( Thermal Performance )
thank you so much for showing and explaining what direction the fans should go in when other tutorials skipped out on it completely, this was super helpful for a beginner like me!
Hi Karen, welcome to my channel and thank you for the feedback. Yup I try to do open view based on my self as a end user. By the way This video is part 2. The thermal performance. All the best with your build too 😉
Thank you. This seems to be the only video showing you how to install the cooler.
HI Mr. Jackson Scales, you can try this where it shows you the temperature. th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
Great guide, everything was explained slowly and more understandable. Thanks 👍
Hello -kl90u- :D , welcome to my channel and thank you for the compliment. You might be interested in this video th-cam.com/video/d2rDgQtX1OM/w-d-xo.html part II the temperature results.
Love this cpu cooler. Its been great for my daughters build which has a intel i7 12700f cpu. Can't wait for the comparisons with the other air coolers.
Hi Rick, welcome to my channel. Yup this cooler is super easy to mount, no hassle, the only thing I will do is to remove those pet sleeve. I dislike them as it’s stiff, other than that, this is a good air cooler.
I'll be watching out for the performance comparison video. You are making great content, kudos! 👍
Hi Earl Lapus, welcome to my channel and do pardon me for the late reply. Just for your info, the performance test is at this video th-cam.com/video/d2rDgQtX1OM/w-d-xo.html once again thank you to have visit and to leave your valuable feedback 😉
Have you tested the Deepcool AK620 yet, if so, how does the this Rev B compare to it? In GamerNexus' video the AK620 seemed to be better than the regular Fuma 2. I haven't seen anyone put this improved version against the AK620.
Hi Dessiika, welcome to my channel. Yes I did and this video might interest you with my findings th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
Very well explained, also with interesting details. 👍
Hi Mauricio Russa, welcome to my channel and thank you for the feedback. You might be interested of the thermal result of this Air Cooler against others, th-cam.com/play/PLEW-b-2vYDdMnBBLGyRrX4w0SmGCZjyEk.html click on Best Budget Air Coolers. Once again thank you to have visit and to leave your valuable feedback.
The Manual shows that you have to connect the small front fan with the white adapter!? Or doesn't matter?
Hello jaymasie, welcome to my channel it does not really matter as it’s trying to indicate one sensor of the fan pair, so that the correct rpm will apply on both fans.
Instructions in package kinda confusing, thanks for video
Hello Aaron18Cvx, welcome to my channel and you are most welcome. All the best with your build.
I think I put the space with the rubber end facing upwards, is that an issue? I looked at the pictures in the instrutions and thought that was the way it was supposed to go. Also how do you know your retention screws are tight enough? Do you go until it doesn't turn anymore?
Hello DaLeadBull, welcome to my channel. As mentioned, if you are using intel processor, the spacer with the rubber is facing down. If it’s AM4, then the rubber will be facing upwards. As for retention, I have tried two methods but to get the best result is to screw the retention where it stops. You will need to screw down in alternate manner so to get balance pressure.
how does it work with the backplate? Dont CPU sockets usually have like metal parts on the other side of the board so thats why the backplate usually has a cut out middle part? How would that work with a full metal backplate? Unfortunately not shown in video.
Hello Value___? welcome to my channel. this is an AM4 motherboard, using the original backplate. unless you are using intel which i do not have that but did illustrate in the video with a brief discription.
Is this still compatible to LGA 775 like the Non-Rev.B predecessor ?
Hi keithX303 welcome to my channel, am sorry to say it did not state you can mount in a LGA 775 socket. It’s only for 2066 2011, 1150, 1151, 1200 and 1700.
@@KleoYan Hi Kleo, that is unfortunate. Thanks for clarification!
@@keith303 you are most welcome.
im still using the first version. still works well so far. also fit into my nr200 case.
Hello Max, welcome to my channel. that's good to hear and thank you for the feedback. I believe some one with a nr200 case will be gald to know your info too. thanks again! 👍
Great cooler. I recommend this to anyone.
Hello Mert Can Bora, welcome to my channel. You it's a great cooler. If you pair up with high static pressure fans, it rocks. You might be interested to watch this too th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
Is its possible to save money and just use the scythe thermal paste ? I dont want to buy another one since the cooler got me one
Hello Rafael, welcome to my channel. You can use the paste that comes with it, not an issue, but there might be a difference in temperature from good thermal paste brands like MX4 or MX6 from Arctic or even other good brands like Thermal Grizzly Extreme. The choice is yours.
Went with the Fuma 2 Rev B to go with my 5900x.
I was worried at first. There is so much talk out there about how Zen 3 can get real hot real fast... even though that's just how it's supposed to be or whatever.
Nah. My 5900x w/ Fuma 2 Rev B runs cooler in every imaginable scenario than my 3600 w/ Hyper 212 Evo did. All while pulling double the watts.
I couldn't recommend the Fuma 2 enough to anyone wondering about it. Absolutely amazing heatsink. It was also the easiest heatsink I've ever installed since it uses the factory AM4 backplate (unlike my previous Hyper 212 Evo).
Hello JustAGuy, welcome back and you are absolutely right. this heatsink does an amazing job.. it's proven as I have tested it.. then unique fin stack made it possible to bring down the temperature but need to pair it with a good static pressure fan to give it's fullest potentiall. illustrated here th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
@@KleoYan Thank you for sharing... That's an awesome test you did.
@@JustAGuy85 you are most welcome.
What temps are you getting? my 5800x is getting 80c while gaming using an Auraflow x240 after using PBO and undervolting. I bought the Fuma 2 hoping to get better temps.
@@albertgarcia986 hi welcome to my channel, am not sure if you are asking JustAGuy but hope you get a good temp with the fuma 2 as I wish I could test those out for you but am not able to as I do not have those PC parts you are having (5800x and Auroflow 240 aio).
Good stuff, thanks for making this video!
Hello K. E., welcome to my channel and thank you for the compliment. You might be interested with the thermal test which you can find in this playlist th-cam.com/play/PLEW-b-2vYDdMnBBLGyRrX4w0SmGCZjyEk.html view the best budget aircooler vid. Once again thank you to have visit. 😉
Hello I have a question, can I upgrade the stock fan? To like say Noctua fan or something
Hello Inevitable Me, welcome to my channel. yes you can, so long is of 25mm. This is what I did when testing thermal results th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
Hi, i have brand new still in the box older model Fuma 2, SCFM-2000 model,,,,does it fit on AM5 boards and is it good enough for 7800x3d or should I buy other cooler? Thnx,,, subscribed!
Hi, I believe I have replied you.. sorry to say, it does not cate for AM5 which is base on your model.
@@KleoYan 👍
@@KleoYan please, check the link, can u confirm, I'm not a very tech person?
@@gezimlimoni2319 you are most welcome.
@@KleoYan www.scytheus.com/news-1/scythe-is-ready-for-am5-socket-compatibility-
In official site the height is given as 154.5 and i have case with 155mm max cpu height . should i buy this cooler?
Hi Notni4a, welcome to my channel, I have measured physically till the tip of the fan as illustrated in this video. I do not suggest you to get this cooler if your case is 155mm max CPU height clearance. it will be of a better choice to get a case that has a 160mm CPU height clearance. This is my strong opinion.
@@KleoYan which cooler do you suggest me to get
@@notni4a784 Hi, maybe tell me which case you are using? and do pardon me, I am not very well verse in Air Cooler, just so happened that I was testing three of the best budget in the market. th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
@@KleoYan can u maybe try rechecking the height . I watched lots of reviews and you were the only one saying its 160mm . I would really appreciate a reply
@@KleoYan it ia a local indonesian brand case called 'fantech cg75'
Hi congratulations for your videos that I follow regularly could you help me? I'm having a problem with the scythe fuma 2 rev b that I installed for my Ryzen 7 5700x processor in idle simply by moving the mouse the temperatures go from 32°C to 60°C I don't understand what's going on . In terms of the case I have a Lian Li Lancool 205 Mesh and Msi B550 Tomahawk motherboard I have 2 Crucial Ballistix 2*16GB memory sticks an Asus Tuf RX6700XT graphics card hoping you can help me
Hello macula Binder, welcome to my channel. It’s abit strange by just moving your mouse that it gone up to that high. You might want to check what’s running on the background in task manager.
@@KleoYan I installed the cooler again and it doesn't change anything the temperature goes from 28°C to more than 50°C as soon as I open Chrome it's beyond understanding...
@@marcusbinder890 hi, I got mix up with the processor, in fact is perfectly normally for 30 to 60 degrees. My 5700x does react this way too. Do not worry. My bad. So long it does not hit 75 and above with light load. You should be fine.
@@KleoYan ok in this case I am reassured thank you 👍
@@marcusbinder890 you are most welcome.
Good night bro, does this Fuma 2 rev B hold a RYZEN 9 5900x? Is this Aircooler High and ?
Hello Anderson Araujo, welcome to my channel and good evening to you. Yes this air is able to take the 5900x no issue.
@@KleoYan ok bro, thanks a lot, I bought an Aircooler like this for my RYZEN 9 5900x, just waiting for it to arrive to test it 😁 thanks for the answer 👍
@@calisteniavibe you are most welcome. All the best with your build. you wont go wrong with the Fuma 2 Rev B. I should have share with you this video.. I totally forgot about it.. anyway this is tested in a 5950X th-cam.com/video/d2rDgQtX1OM/w-d-xo.html
Thanks a lot!
Hello Muttabor, welcome to my channel and you are most welcome. You might want to watch the thermall results as I compare with other good air coolers. th-cam.com/play/PLEW-b-2vYDdMnBBLGyRrX4w0SmGCZjyEk.html click on Best Mid Range CPU Aircooler.
@@KleoYan Well, this is just what i was looking for! =)
@@Muttabor you are most welcome. Enjoy 😉
9:42 is that ATX or m-ATX motherboard?
Hello TCG Arsenal, welcome to my channel. It’s an ASRock x570 Taichi ATX motherboard.
@@KleoYan will it hit the ram if I use it on m-ATX motherboard?
@@TCGArsenal it should have enough clearance if you are using only 2 dimm slots, as for 4 dimm slots, you might hit the rams side slightly or should I say might be a tight fitting.
@@KleoYan I use 2 dimm slots only.
@@TCGArsenal then it should not be an issue.
Hello, Fuma 2 or bequiet DR2 ? Or another... I7 11700f AND Rgb ram
( high exceeds ) Thanks you verry much 🙏 i m Lost... 🤷
HEllo xennos, welcome to my channel. I am not sure about DR2 but will suggest to get Fuma 2 Rev B. If you only use two ram stick, there are enough clearance no issue, same goes to 4 ram stick. just that 4 ram stick is abit tighther but will not hit the Air Cooler, or you can choose to place the fan to your rear. hope that helps.
@@KleoYan You help me à lot becauze too Many brand 😭
My i7 11700f 42 idle, 60 youtube , 92 game. Room 25. Case cooler perfect.
I need better one rapidly 😫
Thx buddy 🙏👌
you are most welcome.. you might want to check this video th-cam.com/video/d2rDgQtX1OM/w-d-xo.html . All the best with your build.
@@KleoYan I have check your another vids and im buying Fuma 2 rev 2 🙂
Thermal paste is incluse in the box ?
If not , Artix mx4 good ?
Thanks for all 🙂👌
@@Xennnos hi ya, welcome back. Yes it comes with the thermal paste but mx4 is all good too. All the best my friend and thank you for visiting and to reply 😉
How much should I tighten the spring screws on i5-12600 cpu, will fully tightening it crush the ihs
Hello Heroic Squirrel, welcome to my channel. Do it evenly as I have illustrated here, I stop where the screw stops as there will be a stop point. Screw it slowly so you don't over tighten it too much!
@@KleoYan hi there, I screwed them fully down but felt it could be too much pressure, so did a few turns looser (evenly as you said) but it’s hard to know for certain what the correct pressure is
@@heroicsquirrel3195 yup. let the retention bracket do the job. as for how much pressure. I always start at the beginner to just thread the screws in as in it lighty hold the heatsink, then apply same quarter tighten rotation on each side till it hits to a point where it does not allow me to screw anymore. I have some feel to tighten and with accuracy. Thats why i can do the comparision with other heatsink. th-cam.com/video/d2rDgQtX1OM/w-d-xo.html . It just takes time to practice. A way to judge, once system up and running, look at the idle temp. if your idle temp is 68 to 72 consistantly, then that is a bad mount.
@@KleoYan thanks for all the information and quick reply, my idle temps are 30c so I think I got it good, hopefully scythes stock paste will be decent until I change to kryonaut or something
@@heroicsquirrel3195 you are most welcome 🙂
Nice video thanks
Hello Jason Bover900, welcome to my chanenel and thanks for the compliment. Do remember to subscribe and click on the notication button as there will be part II ( Thermal Performance )
Lol I was going to comment about 1700 but all you do is move the screw place I might get this on my first build
@@Jason_Bover9000 yup, that the rev b which has that back plate 👍