Перетяжелил конструкцию-это раз! Во-вторых, пропеллеры надо было выше поднять, чтобы поток воздуха на взлёте и посадке мог подсосать дополнительную "подушку" и общая устойчивость в полёте тоже улучшится. С шагом воздушных винтов тоже поэкспериментировать не мешало бы, по-моему шаг можно было бы увеличить?! В третьих, для лучшей аэродинамики пропеллеров их надо заключить в кольца( это повысит и безопасность тоже). Но, главное, "похудеть" во всём( и самому пилоту тоже😊) и убрать всё лишнее, чтобы хотя бы на метр высоты взлететь, а не "чуть-чуть подпрыгивать"!
@@abuahmed3054 Уважаемый, сами пропеллеры достаточно хорошо отбалансированы и при вращении играют роль маховиков гироскопов. Так что, как минимум, 4 гироскопа уже имеется!😉 Да и в автопилотах( миниатюрный автопилот здесь тоже не помешал бы, т.к. слишком велика вероятность вручную сильно "раскачать по крену и тангажу" этот летательный аппарат, со всеми вытекающими печальными последствиями) уже давно применяют лазерные гироскопы, разве не так?!
@@user-vr5do7dj2d Где в этой "жужжалке" аж 4 двигателя по 100 л.с.???😂 Там вижу мотоциклетный движок, хорошо если он 40 л.с индикаторной мощности выдаёт, а с потерями ременных( а какие там могут быть ещё, цепные стальные, что ли?😊) передач к пропеллерам там вообще с мощность завал! С себя всё тряпьё надо было "лётчику" скинуть, оставить лишь лёгкий комбез и каску! Конструкци аппарата переделать по-авиационному ажурно на пределе запаса прочности-"летучей" сделать, а не такую "паровозную" раму мостить и колёса от магазинских тележек по килограмма полтора каждая! Углеродно-графитовых композитов нет там, разве что, пропеллеры из них сделаны?! Но это и хорошо, что не взлетел! Он бы разбился сразу, с такими-то очевидными проблемами устойчивости аппарата по-крену и по-тангажу!😂
No good solution design here. I would power the quadcopter with 4 independent electric motors controlled with a Naze32 type flight controller (Betaflight firmware or similar) and with a buffering battery and use the motorbike strictly for electricity generation to keep the battery at a SoC between 30% and 80%. Further I recommend to put the Quadcopter component ABOVE the driver and not below it, to make it more safe.
You need: 1. Propellers curved to provide upthrust and lift. 2. Distance between propellers and flat ground needs to be increased. 3. Guard the propellers from creating harm to you or anyone. 4. Weight distribution.
He need full armor not only helmet see those blades if fall off and touch the blade it's all over no safety on blades he should fully cover those blades
There is the mesh metal floor to protect him if he ever falls … The biggest issue it’s all constructed with steel and that made it so difficult to lift … either make it lighter or somehow increase the power :) … also it needs to be balanced :) might as well start from scratch :)
Ok so the engine sounds maxed, but i think it needs a torque converter style automatic clutch with better gearing. The catch screen needs to cover all blades, or be built as a mancage, the safety gear needs to be a double stitched layer of leather, A6 cut resistant fabric, and impact armor. Lighten the load on the landing just use gear just use 1/2" round or square tube three point attachments. Looks fun though.
Lol everyone talking bout it being a human blender meanwhile my first thought was if that engine suddenly quits because it's being absolutely maxed out and isn't designed to be at max rpm for very long it's just gonna drop like a rock out the sky plus how hard it is to control since they all spin at the same speed instead of having individual control so he has to use his body weight to control a probly 1200 lbs unwieldy monster
He should definitely find a way to keep the blades from chopping off someone’s head or something and make like a cage to fit over them ! But it’s definitely a good idea and I don’t look that expensive!! Congratulations on your first attempt!!
For 1 it looks WAY to heavy for the motors your using.🤔 you should have built it around a go-kart frame and use as much carbon fiber as possible to make it strong but light
There is a reason the Air Force gave up on trying to build things like this in the 60s. It’s too hard to make it stable. You need a computer, varying the speed of each corner constantly to keep the vehicle stable. Even if you had a computer and four internal combustion engines, it would be unlikely you could vary the output of an internal combustion engine quickly enough because of throttle lag and the differences in torque over the RPM range. But you also need a computer, computer, fast enough and software clever enough. Which is why quad copters didn’t really become a thing until the last 10 or 15 years.
I saw one of these. I think it was in China and they were actually flying around on it. It wasn't like trying to take off. It was actually doing quite well as a flying machine
As hélice deveria ser envolvida em um tubo para direcionar o ar com hélice invertida para estabilidade, a regulagem de vôo seria janelas que fecham a entrada do ar, deveria ser inclinado as hélice ou seja o motor para ter maior estabilidade, colocar um pêndulo ou peso como nos navios para estabilidade, se vocês colocar um pêndulo central vocês pode colocar os motores em linha 2 atrás e dois na frente com rotação opostas para estabilidade veja todo pássaro tem barriga e peito para estabilidade a moto seria o pássaro a tendência é virar abraço
If the Earth was actually a big round ball instead of a flat plane this contraption might actually work down under because the bulk of the weight would actually be on the right side.
He'll be mincemeat if he ever falls off ☠️
Tattar
Was literally thinking the same thing.. Bro I pray they make some safety features asap!!!
There is a metal net above the fans though
@@scaletta5847
That's to control the size of mince.
@@scaletta5847 A net to make the square slices what do you mean.. It barely was keeping it safe.. Are we watching the same video.. lol..
Benefit = 0%
Danger = 1000% ⚠️
😂
Stupidity in action 😂
Wife can cheat on him.😮😮
เก่งแต่ต้องปรับปรุงการบังคับให้มีความปลอดภัยครับ
Он в бронике .
What doesn't kill you does not always make you stronger.
Sometimes it makes you ribbons of spaghetti.
@@user-lv7qn4gw3gwhat kills you make you ribbon spaghetti.. but what doesn't makes you stronger.
Перетяжелил конструкцию-это раз!
Во-вторых, пропеллеры надо было выше поднять, чтобы поток воздуха на взлёте и посадке мог подсосать дополнительную "подушку" и общая устойчивость в полёте тоже улучшится. С шагом воздушных винтов тоже поэкспериментировать не мешало бы, по-моему шаг можно было бы увеличить?!
В третьих, для лучшей аэродинамики пропеллеров их надо заключить в кольца( это повысит и безопасность тоже).
Но, главное, "похудеть" во всём( и самому пилоту тоже😊) и убрать всё лишнее, чтобы хотя бы на метр высоты взлететь, а не "чуть-чуть подпрыгивать"!
آپ گیرو کا استعمال کرتے تو اچھا تھا اس سے بیلنس کرنے میں کافی صحولت مل سکتی ہے
@@abuahmed3054
Уважаемый, сами пропеллеры достаточно хорошо отбалансированы и при вращении играют роль маховиков гироскопов. Так что, как минимум, 4 гироскопа уже имеется!😉
Да и в автопилотах( миниатюрный автопилот здесь тоже не помешал бы, т.к. слишком велика вероятность вручную сильно "раскачать по крену и тангажу" этот летательный аппарат, со всеми вытекающими печальными последствиями) уже давно применяют лазерные гироскопы, разве не так?!
You need a flight controller to manage the propeller speeds or you won't be able to stabilize it no way in hell
วัสดุที่ใช้ทำโครงสร้าง 1กราไฟว์
2คาบอรน์
3อลูปิเนียม
4เครื่องยนต์ 100hp
@@user-vr5do7dj2d
Где в этой "жужжалке" аж 4 двигателя по 100 л.с.???😂
Там вижу мотоциклетный движок, хорошо если он 40 л.с индикаторной мощности выдаёт, а с потерями ременных( а какие там могут быть ещё, цепные стальные, что ли?😊) передач к пропеллерам там вообще с мощность завал!
С себя всё тряпьё надо было "лётчику" скинуть, оставить лишь лёгкий комбез и каску!
Конструкци аппарата переделать по-авиационному ажурно на пределе запаса прочности-"летучей" сделать, а не такую "паровозную" раму мостить и колёса от магазинских тележек по килограмма полтора каждая!
Углеродно-графитовых композитов нет там, разве что, пропеллеры из них сделаны?!
Но это и хорошо, что не взлетел! Он бы разбился сразу, с такими-то очевидными проблемами устойчивости аппарата по-крену и по-тангажу!😂
There is no way I’d ride a human blender.
😅
It worse than that it’s 4 human blenders and your surrounded by them 😂
1st thing I said. Agree 💯 %
Nice 😂
@@Zig423😂😂😂😂😂 - sorounded by human blenders
What do you ride ???
A chopper.
🛬🛬🛬🛬🛬
Get in to the chopper Arnold
Literally
monta geringoptero
Nice😂
No good solution design here. I would power the quadcopter with 4 independent electric motors controlled with a Naze32 type flight controller (Betaflight firmware or similar) and with a buffering battery and use the motorbike strictly for electricity generation to keep the battery at a SoC between 30% and 80%.
Further I recommend to put the Quadcopter component ABOVE the driver and not below it, to make it more safe.
You need:
1. Propellers curved to provide upthrust and lift.
2. Distance between propellers and flat ground needs to be increased.
3. Guard the propellers from creating harm to you or anyone.
4. Weight distribution.
Such a positive comment. I love it
I'm glad he is wearing a helmet in case it might go wrong.
Yeah.....he will only have a head of he falls
Ever heard of bottoms up approach. Yeah right, that’s only when you have beer with friends 😂
Yeah.. no need for gloves in this instance
pois é, se der errado, sobra o capacete.
He need full armor not only helmet see those blades if fall off and touch the blade it's all over no safety on blades he should fully cover those blades
Next up, world's first human smoothie made with real meat
Don't worry he's working on a safety net for next one 😂
McDonald’s already uses human meat fillers in their burgers. It’s in a smoothly form before they add it the hamburger and sausage meat.
So take it apart and make everything aluminum and you'll be flying like Superman ✨👍✨
Bro said he gone make a flying bike since the rest of us are waiting and hoping for flying cars.
Reminds me of those old school videos of the first plane makers.... Looks dangerous af
Extremely Dangerous Product💀☠️
A lot of homemade helicopter liveleak footage has taught me that building your own flying machine is the best way to end up in pieces on your own lawn
There is the mesh metal floor to protect him if he ever falls …
The biggest issue it’s all constructed with steel and that made it so difficult to lift … either make it lighter or somehow increase the power :) … also it needs to be balanced :) might as well start from scratch :)
Ok so the engine sounds maxed, but i think it needs a torque converter style automatic clutch with better gearing. The catch screen needs to cover all blades, or be built as a mancage, the safety gear needs to be a double stitched layer of leather, A6 cut resistant fabric, and impact armor.
Lighten the load on the landing just use gear just use 1/2" round or square tube three point attachments.
Looks fun though.
He'll be menced meat in no time!!!😮
His riding a blender machine😂🎉
Hahahah .....you such a Cannibal 😂
Just the ingenuity is amazing. 🤩
This guy's like Billy. Bob out there trying to build a drone
It will be a Horrific Death if you fall in one of those "Helicopter Blades".
Oh yeah, THAT looks safe 😂 wtf 😂
Needs to eliminate at least 200 lb of metal. Maybe he could take off 15 ft off the ground😊
Semakin di manja semakin ngelunjak 😂😂😂
Lol everyone talking bout it being a human blender meanwhile my first thought was if that engine suddenly quits because it's being absolutely maxed out and isn't designed to be at max rpm for very long it's just gonna drop like a rock out the sky plus how hard it is to control since they all spin at the same speed instead of having individual control so he has to use his body weight to control a probly 1200 lbs unwieldy monster
😂😂😂😂😂😂😂😂😂
เล่นอะไร
It's never going to get off the ground. To heavy and everything is wrong. Maybe if he upgraded to a jet engine. Be easier to get a helicopter.
And with a whirlpool throttle it's not a good combo.
Only computer control system can manage that geometry
He took us back 100years....dude, we are in the jet age
Don't give him any ideas.
Helicop jump jump jump 😅😂
if the propeller is on top of the engine then the force of gravity will make it balance
He should definitely find a way to keep the blades from chopping off someone’s head or something and make like a cage to fit over them ! But it’s definitely a good idea and I don’t look that expensive!! Congratulations on your first attempt!!
For 1 it looks WAY to heavy for the motors your using.🤔 you should have built it around a go-kart frame and use as much carbon fiber as possible to make it strong but light
Даже эти колеса от телеги имеют вес килограмм
@strelok6186 I know they look like shopping cart wheels 😅 to much weight
Make the frame lighter, a guard over the fans for safety an try again my man!
Puts a new meaning to a close shave. 😂😂😂
Japan tech is never regular. It's the best. Practical and functional
Electronic clutches for the fan blades connected to a gyro would probably make that alot more stable and alot more functional
Absolutely true he need reduce weight and make a system to control fans speed to be stable
That ain't no Honda
Nope it's a Yamaha
👍
You guys should put a flight controller in that so you can stabilize better 😅
There is a reason the Air Force gave up on trying to build things like this in the 60s. It’s too hard to make it stable.
You need a computer, varying the speed of each corner constantly to keep the vehicle stable.
Even if you had a computer and four internal combustion engines, it would be unlikely you could vary the output of an internal combustion engine quickly enough because of throttle lag and the differences in torque over the RPM range.
But you also need a computer, computer, fast enough and software clever enough. Which is why quad copters didn’t really become a thing until the last 10 or 15 years.
Dumb as hell, there is so much potential for something to happen 😂
Taking the lawnmower to a whole new level 😅
I saw one of these. I think it was in China and they were actually flying around on it. It wasn't like trying to take off. It was actually doing quite well as a flying machine
Its called chopper coz it chops humans who accidentally falls from the seat
Suicide machine.
😂😅😂😅
As hélice deveria ser envolvida em um tubo para direcionar o ar com hélice invertida para estabilidade, a regulagem de vôo seria janelas que fecham a entrada do ar, deveria ser inclinado as hélice ou seja o motor para ter maior estabilidade, colocar um pêndulo ou peso como nos navios para estabilidade, se vocês colocar um pêndulo central vocês pode colocar os motores em linha 2 atrás e dois na frente com rotação opostas para estabilidade veja todo pássaro tem barriga e peito para estabilidade a moto seria o pássaro a tendência é virar abraço
هل انت مهندس طيران اكيد
Kudos to you, i respect your instincts
When it’s start flying i would buy one, so don’t give up testing. ☝🏽
Confidence 💯
Flying bike ❌ body chopper ✅
Just like a jet propeller.. you need directional and focused thrust.. 😊
VERY DANGEROUS IF THE PILOT FALLS ON THE BLADES .😢
Dude is every neighbors favorite
..xpectations vs reality..1)aerodynamics,,2)lightweght is a must,3)and safety measures specially w/dos propellers..keep going man...👊🙏🙏🙏
Reminds me of the Hiller flying platform from 1955
At least it had a screen to protect you from the spinning propeller
Looks like theres no regulations around this project lol
This is not Honda, this is Yamaha.
Motorcycles are dangerous enough without attaching 4 blades😂
He has idea! He is an engineer. The exposed blades are dangerous though
Too heavy.
Waste of time and money 😂
Need GPS to keep it in place!🤪
Пока ещё, этим изобретением кукурузу можно косить😂🤣
Heli-chopper
Keep going man 😊. You'll make it fly
I prefer those jet packs that is installed on the arms. Less danger of getting sucked into them.
Try 100 percent and you will succeed, my best wishes
If he falls in one of the propeller 💀💀💀
Honda❌
Yamaha✅
Put the blades above you, we already know this works.
Get rid of the ridiculous trolley and put the wheels back on.
A hundred year from now, this will be a documentary on early modern aviation.......
To jest nowoczesny pojazd do tłumienia zamieszek w muzułmańskich dzielnicach zachodniej europy.Wjeżdżasz w tłum i masz mięso na kebaba
What lesson did we learn today?
Not everything is worth the money and time.
I feel like a sound proof full face helmet with a mic to someone watching you would complete that..
I would be wearing some ankle/leg guards 😂 looks like it could chop his foot right off
Много раз пытались делать , практически неуправляемая конструкция , а в этом случае просто смертельный аттракцион .
Буквально сидит над четырьмя бензопилами.....
😂😂😂😂😂
How did you get your neighbours bedroom photo 😅?
Now this is a real chopper
Riding a bike blender is crazy
Exhaust is the problem for not lifting. Modify its direction, it will lift.
Я ждал когда его паремелит в фарш!😂
Smaller propellors. More Power. closer to each other. Balanced.
Back to the drawing board 😂😂
What's your super power?
He: Luck
Esse cara conseguiu superar o perigo das motocicletas comums
Using light metal such as aluminum or duralumin for the frame will work better.
God bless you sir 👍❤️
broo if you rotate silencer in opposite direction it will be good
IMAGINE THE ACCIDENT REPORT
The helmet was 100% for camera and 0% for safety😂
Quando esse motor explodir, e suas hélices parar; você irá sentir suas forças indo embora!
Good attempt, but make a cover for propellers same like in a table fan. Safety First bro.
Video : honda bike
Yammaha badge : am i a joke to u
Lage raho ho jayega kamiyab, all the best 👍🏻
He needs a 5.3 engine under the unit and 8 more fans.
الدوران لازم يكون ثابت ويكون في عتلة تتحكم بالمراوح لان هي المسؤلة عن الصعود والنزول والامام والخلف
This won't end well 😂😂
The props should have adjustable pitch
..Rotor blades below me = No
Rotor blade above me = Yes..yes
😅😂😂😂👊...
He managed to be the originator of ideas. Maybe someone else will continue🎉
If the Earth was actually a big round ball instead of a flat plane this contraption might actually work down under because the bulk of the weight would actually be on the right side.
Tidak bisa memikul beban pake otak ,tapi namanya usaha bisa dicoba tidak ada salahnya good job👍
कोशिश तो अच्छी है लेकिन लगता है, उड़ान भरने में और पावर की जरूरत है 🥰
I used to think that motorcycles could fly. But I don't think anyone will actually make it.😂