How can I use Max6675 with PLC. Please tell me as I was using ada8495 but then lost it and now it's not available in my country and only Max6675 is available. Please reply.
Thank you very much for a great video. I'm just doing this very similar for a fan air control to regulate temperature on my BBQ. your code is much prettier than mine. Lol Im using a 16x2 screen for output which works fine. Now I'd love to like to add in a rotary encoder to be able to adjust the setting temperature without having to upload a sketch. I'm struggling with that part. Would you be able to point me in the right direction for direction on that?
You are welcome. I am pleased that you found it useful. I will make more tutorial and including LCD. this is not simple to explain it with just text. If time permits, I will make videos related to this.
I am using my MAC for programming but always get the following error: No matching function caLL for MAX6675. What must I change to make it function? Thanks for a great video and for your help.
you have skipped the parts where I mentioned to install the library. Here is the same video with better details th-cam.com/video/yJYXfaU9J34/w-d-xo.html which is part of the course or watch introduction to MAX6675 th-cam.com/video/A55QNx6kCoo/w-d-xo.html. The video you are watch is not introduction.
I followed your tutorial for max6675 and lcd display, thanks for the tutorial. I am going to try this tutorial also just have some doubts please do clarify these. First is can we use a 5v relay (no module). Secondly the fan used is ac or 12V dc fan can also be used. If possible please give the link for the fan.
Yes you can use relay if you drive it properly as shown in this video th-cam.com/video/N-fFk51Eb8s/w-d-xo.html for the fan, there are 1000s of options. Search on eBay or Amazon you will find something that will work for you
explained in a very simple and detailed way. I am trying to map it on the Blynk. Apart from Blynk library, I added command in void setup section: Blynk.virtualWrite(V5, temperature); but no temperature value shows up in Blynk app. Am I putting some wrong parameter in virtualWrite command?
relay is just a switch as I shown (if not watched, then watch again) and it will turn ON and OFF loads. Just respect the rating of current of the relay, then it will work for anything.
very good job explaining Arduino and using sensors ! Thanks Time to dig out my Arduino
Awesome I can use this to build a battery bank or protection for pump system or fan control for my projects in confined spaces 👍
Perfect
Very good. I liked it.
Thank you! Cheers!
i was follow your code for my inciniraoe circuit
its work thank you sir.
i was follow your code for my incirinator circuit .it's woks nice thankyou sir
You are welcome
@@robojax SIR HOW TO USE K TYPE THERMOCOUPLE WITH ATMEGA 328 P ?
WITHOUT MAX6675 MODULE
Great video
Glad you enjoyed it
Ottimo lavoro stavo proprio aspettando un progetto del genere... se c'èra anche il display IC2 era ancora meglio.
Buono a sapersi che ti è piaciuto. Sì, lo farei sicuramente con LCD quando il tempo lo consente.
Nice sir your supporter here..
Thank you very much.
Assalamualaikum sir , salam from indonesia country 🙏
Walaikum salaam, Stay safe.
How can I use Max6675 with PLC. Please tell me as I was using ada8495 but then lost it and now it's not available in my country and only Max6675 is available. Please reply.
can this be connected to Artisan Scope software to do PID control of coffee roasting? please.
you can read the temperature. so this outputs the reading value. it is free for you to use it whichever way you are pleased with.
Thank you very much for a great video. I'm just doing this very similar for a fan air control to regulate temperature on my BBQ. your code is much prettier than mine. Lol
Im using a 16x2 screen for output which works fine. Now I'd love to like to add in a rotary encoder to be able to adjust the setting temperature without having to upload a sketch. I'm struggling with that part. Would you be able to point me in the right direction for direction on that?
You are welcome. I am pleased that you found it useful. I will make more tutorial and including LCD. this is not simple to explain it with just text. If time permits, I will make videos related to this.
I am using my MAC for programming but always get the following error: No matching function caLL for MAX6675. What must I change to make it function? Thanks for a great video and for your help.
you have skipped the parts where I mentioned to install the library. Here is the same video with better details th-cam.com/video/yJYXfaU9J34/w-d-xo.html which is part of the course or watch introduction to MAX6675 th-cam.com/video/A55QNx6kCoo/w-d-xo.html. The video you are watch is not introduction.
I followed your tutorial for max6675 and lcd display, thanks for the tutorial. I am going to try this tutorial also just have some doubts please do clarify these. First is can we use a 5v relay (no module). Secondly the fan used is ac or 12V dc fan can also be used. If possible please give the link for the fan.
Yes you can use relay if you drive it properly as shown in this video th-cam.com/video/N-fFk51Eb8s/w-d-xo.html for the fan, there are 1000s of options. Search on eBay or Amazon you will find something that will work for you
Whats the app name of programming part?
Here is my course which will teach you th-cam.com/play/PLHvJ4bw0xno6THv-TQLf8lwVvY_23z75d.html
Or this 30 minutes introduction th-cam.com/video/Mbb2xa1WcRM/w-d-xo.html
explained in a very simple and detailed way. I am trying to map it on the Blynk. Apart from Blynk library, I added command in void setup section: Blynk.virtualWrite(V5, temperature); but no temperature value shows up in Blynk app. Am I putting some wrong parameter in virtualWrite command?
sorry I have no idea how you use it with other software. I don't like software or apps that don't offer free service.
Can I use this code to turn relay on/off for microwave oven power control?
relay is just a switch as I shown (if not watched, then watch again) and it will turn ON and OFF loads. Just respect the rating of current of the relay, then it will work for anything.
@@robojax thankyou
Could you do one using the high side mosfet controlling a dc fan with pwm, using the Arduino and k type thermocouple?
This is interesting topic. if time permits, I will make tutorial on that. Thanks.
How long the maximum delay time?, I need at least 5minutes before it started.
it is up to you. inside setup() just add delay(5*60*1000); that is 5 minuets.
great tutorial sir..
i am from indonesia
if i set temperatur with push button, it"s work???? can you help me code sir?
Thanks, To be able to push temperature, it would be big project. I might do god willing
uba wage ponnayek mn dakalama na yko.hena gahanawa.hena.mariyn.ub loku na mt .haraka..eluwa.therenneth na yko.pakaya.?/
/#((3 |
? Google translate was not able to understand it.