I have this EXACT HTRC charger. I have had it since 2020. It still works great. I have tested its accuracy against an HP bench oscilloscope and Fluke Multimeter. The tolerances are absolutely acceptable for such a bargain charger, and better than most including my Traxxas 6amp charger based on the same SkyRC B6 V2 PCB these are both built upon. This charger provides all the features in the original SkyRC where the Traxxas does not, like reading individual cell resistance which is very important for monitoring battery health! So after over 4 years of use this little charger has more than paid for itself and outlasted a couple other much more expensive chargers.
Also wanted to mention that I fried mine with a static charge from my finger. I had mine charging a battery once and I had static build-up and did not know it until I touched one of the buttons and a spark from my finger totally fried the unit instantly. It was a very strong spark and it was over. So be sure you discharge all static if you are in a high static environment.
Just my opinion but I don't see any reason to get this charger over Toolkitrc M6. This is based on the ancient 4 button charger, with added features. The M6 has more features, higher power, more compact, better interface and the list goes on. All for nearly the same price. The only thing I like from this charger is the passive cooling that comes at a cost of bigger physical appearance, which I actually wouldn't even trade with.
Love my b6 v2. I’ve had mine over a year and a half and the power supply is just now starting to give me fits. Like if I bump the power cable the charger will reset but as long as I leave it be it’s fine and charges well.
Could you plug multiple 3s batteries in the 3s/4s sockets. Just asking because my balance leads on my balance board doesn't work but the xt 60 ones are ok. So i would use my board to balance xt60 and plug two batteries in those ports. Just using the first 3s pins out of the 4s port for example
It seems simple can I just use a balance board with a xt60 with the charger ports and can I charge more than one battery and if they have the same voltage and same cell and on the balance board if it comes with another plug can I just use the white balance plug not the other plug that comes with the balance board
I have one like this and everything works except, charge in balance mode and balance battery . Work couple seconds and then on the screen at mah shows 0 and stay like this hours . In simple mode charge in series reach's at the end, but in balance mode charge or balance battery do nothing . You tasted yours it's ok ? Thanks
Hello, can this charger still be recommended? My son got an RC model for Christmas and I need to look for a good and inexpensive charger. Will this purchase be a good one or should I look for something else?
I had a Original IMAX B6 Mini on which the display suddenly started showing weird characters instead of alphabets an year ago and so it is not usable now. The only way left to use it is to connect to a PC and use the SKYRC software to set the modes and monitor the charge via USB. Since then I do not trust chargers of this design at all...
I have this same B6 V2 but in Gold plate. When I used the storage/discharge function, the entire unit metal gets hot to the touch. Does anyone else have this issue?
Looks like a fake of Skyrc? Can you do a more detail test of it accuracy like the individual voltage and also current while charging. Will get a few if its accurate.
I have same fake blue imax b6 also. My 4s is broke after few charge. Maybe battery is defective or maybe this fake @ss sh**t broke it. Now in dilemma whether to use it on my new lipo or not. So whats your opinion about this fake blue charger? I use 1.5amp ac adapter before. Now i purchase 6amp power brick to use with it. Now i rarely do fpv due to busy working..whats ur recommendation for great budget charger u see fit for keep 4s healthy?
@@MCsCreations hi sorry for disturbing, in new to rc. I saw the m6 and it seems very good, but i ve only seen peaple charging with big lipos in the input side. Can i just use a normal plug in my walls to get power? If yes, will the m6 work with a weaker input, like with the cable i use for my phone?
This is POS, is just die after 2 years without any reason, last day start to act strange, don't see battery, and now won't work. Don't buy this charger, you will regret. Even fake SkyRC is better. First time buy fake sky rc mini version but because of manufacturer mistake when connect serial port its fries it self, fix that and second time fries with over rated current trough it, I know last time is my mistake but this charger HTRC have bad work from start, storage mode is very bad, its rise voltage up to 3,7 per cell and stop, B6 mini is work that very well by maintaining voltage with very low current up to 0,1A and 3,7 or 3,8V then stops . And like that last days got couple time warning about battery disconnect, restart and work ok but now no more work with any tipe of battery charge, discharge, storage, power mode...nothing....
HTRC B6 V2: bit.ly/355V5Ea
XT60 Charger Boards: bit.ly/2FV5pEv
XT30 Charger Boards: bit.ly/2FV5pEv
Get Your Premium FPV Shirts:
shopdronemesh.com/product-category/fpv/
I have this EXACT HTRC charger. I have had it since 2020. It still works great. I have tested its accuracy against an HP bench oscilloscope and Fluke Multimeter. The tolerances are absolutely acceptable for such a bargain charger, and better than most including my Traxxas 6amp charger based on the same SkyRC B6 V2 PCB these are both built upon. This charger provides all the features in the original SkyRC where the Traxxas does not, like reading individual cell resistance which is very important for monitoring battery health! So after over 4 years of use this little charger has more than paid for itself and outlasted a couple other much more expensive chargers.
Thank you. Just bought one on Amazon, and with all the mixed reviews, it's hard to tell if it's safe or not
Also wanted to mention that I fried mine with a static charge from my finger. I had mine charging a battery once and I had static build-up and did not know it until I touched one of the buttons and a spark from my finger totally fried the unit instantly. It was a very strong spark and it was over. So be sure you discharge all static if you are in a high static environment.
Just my opinion but I don't see any reason to get this charger over Toolkitrc M6. This is based on the ancient 4 button charger, with added features. The M6 has more features, higher power, more compact, better interface and the list goes on. All for nearly the same price. The only thing I like from this charger is the passive cooling that comes at a cost of bigger physical appearance, which I actually wouldn't even trade with.
What power supply do you use for the M6?
I don't own a M6 myself, but for my charger I use some random 19V 8A power adapter I have laying around, @@SmallsFPV.
Yes, @bojo perez. Set on Pb and 6S, charge current should be 1/5 of battery capacity.
No, @bojo perez. You'll have to look on the specs of the battery and work from there.
Any hobby charger will do, @bojo perez. I think those that accepts AC input is more suitable for you. No need to source external power supply.
Love my b6 v2. I’ve had mine over a year and a half and the power supply is just now starting to give me fits. Like if I bump the power cable the charger will reset but as long as I leave it be it’s fine and charges well.
I got one of these in 2004. dont know how that relates to „new“ but hey, they added a feature in software or two...
I have a similar charger (may be a re-brand). Only really use it for balance charging. Need to explore the other functions. Thanks for the review.
Thanks for the tutorial, very useful. One question: if I want to calibrate the charger, what is the procedure? Thanks again
Could you plug multiple 3s batteries in the 3s/4s sockets. Just asking because my balance leads on my balance board doesn't work but the xt 60 ones are ok. So i would use my board to balance xt60 and plug two batteries in those ports. Just using the first 3s pins out of the 4s port for example
It seems simple can I just use a balance board with a xt60 with the charger ports and can I charge more than one battery and if they have the same voltage and same cell and on the balance board if it comes with another plug can I just use the white balance plug not the other plug that comes with the balance board
I have one like this and everything works except, charge in balance mode and balance battery . Work couple seconds and then on the screen at mah shows 0 and stay like this hours . In simple mode charge in series reach's at the end, but in balance mode charge or balance battery do nothing . You tasted yours it's ok ? Thanks
Hello, can this charger still be recommended? My son got an RC model for Christmas and I need to look for a good and inexpensive charger.
Will this purchase be a good one or should I look for something else?
Mine will not for some reason charge my 6s LiPo battery for my aircraft
My battery is 9.6V 11.7Ah LiFePo4. What setting should i use please. I keep getting low voltage or high voltage.
How do I charge a 7.2 lipo with deans connector?
I had the b6 ac from like 4 years ago. And it charger everything nimh as well
Sounds like you got yourself a cold ? Thanks for the review
I had very high fever last couple days.. Thanks for noticing :)
@@DroneMesh Hope you start feeling better soon bro ! Take care of yourself !
I had a Original IMAX B6 Mini on which the display suddenly started showing weird characters instead of alphabets an year ago and so it is not usable now. The only way left to use it is to connect to a PC and use the SKYRC software to set the modes and monitor the charge via USB. Since then I do not trust chargers of this design at all...
Most likely is a faulty screen which can be purchase from electronic components shop and replace it yourself
in balance mode descarge, capacity is /total, not /cell . its true ? so you can't check capacity, just one by one
Does the 3,2 v not destroy the cell by discharging a lipo, why they set it so low? 3,6 max dosent it?
Im still trying to figure out how to carge my 4s lipo with this when ever i hold the start button to start it starts to beep a tell me to disconect
Got one on Ebay for 30 bucks. I know how to use it now. Thank You
Can this do capacity test ?
Get well soon. Great review as always.
Hi is gold color scheme is same as black color like the one u have? Saw it online store only gold color but no black colors. What is wrong? Thanks
The gold is black for some reason.
@@DroneMesh im going get gold color then. Thanks again man
what the power suply adaptor specification (output voltage and ampere)?
v3 +ebay = countefeit not working no display
V3 of this is now out on Amazon! I wonder what the differences are.... I am new to this world.
was the first and only one i have bought and i reccomend it!
I have this same B6 V2 but in Gold plate.
When I used the storage/discharge function, the entire unit metal gets hot to the touch. Does anyone else have this issue?
It will get very hot naturally because of current dissipation through heat. Use with caution ,batter use with a fan or something like that.
Just what i was about to post myself. YES mine gets extreemly hot when in Storage Mode. Almost too hot to touch!!!!
I just got this charger in the mail! Looks nice. It costs 50 now
V3 of this is out and I bought it! I wonder what the differences are from this.... I am new to this world.
V3 if this is now out on Amazon! I wonder what the differences are.... I am new to this world.
You can buy the same temperature sensor used for the sky rc imax charger,it works great
Nice review - thanks for that!
Ordered, thanks man!
mine just keeps saying battery disconnect
i saw your vid and decided to cut the wires and connect the banana plugs to the clamps. it works now 😀
Looks like a fake of Skyrc? Can you do a more detail test of it accuracy like the individual voltage and also current while charging. Will get a few if its accurate.
is this possible to use on dji batteries?
They don't give you the car clamps to power it anymore.
Thankyou for the review Dronemesh. Does it charge 90WH lipo battery as well or its limited to 80W?
I got one of these. Out of desperation I charged my car battery 😀
i just bought this same charger on amazon for 18 bucks new never mind mine is the v3
Just ordered the V3. Wonder what the difference is?
Same here in August of 2023. Did you find anything out? How did it work? Thanks in advance if you see this.
did you catch your train?
FYI your charger board links are the same
Does yours spark when you plug it in?
Yes, but plug in the banana plugs before you connect the AC
Awesome review, Sam! 😃
I have the blue version, but I don't use it anymore... Because I guess it's a fake. It destroyed 2 batteries of mine. 😬
I have same fake blue imax b6 also. My 4s is broke after few charge. Maybe battery is defective or maybe this fake @ss sh**t broke it. Now in dilemma whether to use it on my new lipo or not. So whats your opinion about this fake blue charger? I use 1.5amp ac adapter before. Now i purchase 6amp power brick to use with it. Now i rarely do fpv due to busy working..whats ur recommendation for great budget charger u see fit for keep 4s healthy?
@@hanquah Dude, I won't use mine anymore. I bought a ToolkitRC M6 and I love it!
@@MCsCreations ahhh i think i gonna go for htrc b6v2 1st then buy m6 also. Thank for replying man
@@hanquah Absolutely no problems, dude. Whenever you need. 😊
@@MCsCreations hi sorry for disturbing, in new to rc. I saw the m6 and it seems very good, but i ve only seen peaple charging with big lipos in the input side. Can i just use a normal plug in my walls to get power? If yes, will the m6 work with a weaker input, like with the cable i use for my phone?
Can it charge 6s lipo?
Yessir
Congested.
Can you take it apart and tell how good is it from inside? Have you heard about cheali-charger? github.com/stawel/cheali-charger
DON'T BUY IT'S A FIRE HAZARD storage charge it gets very hot screen discolored with the heat bin job
It’s garbage. Mine doesn’t work
Lol dude u lost me
This is POS, is just die after 2 years without any reason, last day start to act strange, don't see battery, and now won't work. Don't buy this charger, you will regret. Even fake SkyRC is better.
First time buy fake sky rc mini version but because of manufacturer mistake when connect serial port its fries it self, fix that and second time fries with over rated current trough it, I know last time is my mistake but this charger HTRC have bad work from start, storage mode is very bad, its rise voltage up to 3,7 per cell and stop, B6 mini is work that very well by maintaining voltage with very low current up to 0,1A and 3,7 or 3,8V then stops . And like that last days got couple time warning about battery disconnect, restart and work ok but now no more work with any tipe of battery charge, discharge, storage, power mode...nothing....
V3 of this is now out on Amazon! I wonder what the differences are.... I am new to this world.
higher wattage and can charge battery up to 6A per second