Although this manifold will solve your issues, there is much to learn, read up on fluid dynamics, there is so much more gains to be had in building a custom inlet manifold correctly, not many people actually get it right, only good enough.
Make sure you disassemble, inspect, and debur that eBay throttle body. On the one I got the throttle plate screws were loose and the plate had a bur around it keeping it from fully closing
Very interested in seeing how you get the key for the TPS to work. Btw manifold looks sick just saved yourself a good $450. Time to send her to the moon
There’s a Puerto Rican guy in the US that makes 5E-FE billet manifolds but idk how much they are and if the fit in the 4e they are called gato performance he does really nice manifolds
@matt berry, i saw same plenum at ebay, i am planning to buy one, i have a 4efte on my custom jeep. what else do i need to install this plenum, do i have to modify something to install it? your answer would be a great help for my project. thank you.
btw, my custom jeep has fmic, stock turbo, planning to install 4agze injectors, i also have external wastegate and bov,.. does stock internals would still be ok?
How does it struggle to make over 250hp lots of people run the likes of td04 hybrid turbos without plenum inlets on stock heads bar uprated valve springs and make 260-300hp?
I had a stock 5efe with valve springs and it made 265 hp on the same dyno on 17psi with that exact manifold that Nick has in this video... We only revved that engine to 7000... the difference is after 7000 the cfm that the engine needs greatly increases and the intake cant flow it. Also a huge factor is our climate is 35 degrees celcius with around 90% humidity... Cold air= dense air= more power. Our climate sucks haha This is why the boys in the UK can make great HP on the TD04 stuff, cold air is great!!
Although this manifold will solve your issues, there is much to learn, read up on fluid dynamics, there is so much more gains to be had in building a custom inlet manifold correctly, not many people actually get it right, only good enough.
We were looking into the Audi dual plenum designs, however this one was out first one so lets see if we blow the welds on the intake
@@Camp_Dogs how can I message u
adobe inventor is the key, ;)
Make sure you disassemble, inspect, and debur that eBay throttle body.
On the one I got the throttle plate screws were loose and the plate had a bur around it keeping it from fully closing
Love it. I wonder if a chargecooler element fits in the manifold 🤔
Awesome work as usual Matt!!!
Nice fabrication work Matt, the intake manifold looks ace 👍🏽 Love the D&B outro 😎
Awesome fab skills bruz!!!
The velocity tubes were really a good idea. Easy way to diminish turbulence inside the intake. Maybe not the best but wont be terrible
Very interested in seeing how you get the key for the TPS to work. Btw manifold looks sick just saved yourself a good $450. Time to send her to the moon
Still over $450 in parts an materials... did the install video explain enough about mounting the tps?
Love your work & enthusiasm Matt.
Its gon be pretty rad!! 🔥
WickedEP racing have a custom manifold for the 4e/5e that uses a Honda throttle body. Love your design though
Love this
Nice job matt!
you are always HERO . the worldclass
Hi there where did you get the 4 velocity stacks from ? cheers Shane NZ...
Jnt performance in Aus. They also have an eBay store
@@Camp_Dogs thanks very much for that much appreciated..
Love it🇯🇲🇯🇲
What are the velocity stacks size and dimensions of the intake manifold
Let me know
I probably go with 80mm since I can't find a 75mm on my end 😂
5efte would be ok since is larger displacement 1.5 vs 1.3 going with at least 75mm bore stock 5e stroke is 87 vs 77 on 1.3 5efe crank too
There’s a Puerto Rican guy in the US that makes 5E-FE billet manifolds but idk how much they are and if the fit in the 4e they are called gato performance he does really nice manifolds
tried emailing them, the response was they dont make them anymore... i wonder how much they were...
Sick cnt 😎
@matt berry, i saw same plenum at ebay, i am planning to buy one, i have a 4efte on my custom jeep. what else do i need to install this plenum, do i have to modify something to install it? your answer would be a great help for my project. thank you.
btw, my custom jeep has fmic, stock turbo, planning to install 4agze injectors, i also have external wastegate and bov,.. does stock internals would still be ok?
Matt do you sell this manifold ??
I have something very similar, 70mm tb.
Good work
any chance of you making a td04/5 manifold and downpipe and shipping to New Zealand?
not doing exhaust manifolds atm sorry, they take way too long...
Cool 👏
How does it struggle to make over 250hp lots of people run the likes of td04 hybrid turbos without plenum inlets on stock heads bar uprated valve springs and make 260-300hp?
I had a stock 5efe with valve springs and it made 265 hp on the same dyno on 17psi with that exact manifold that Nick has in this video... We only revved that engine to 7000... the difference is after 7000 the cfm that the engine needs greatly increases and the intake cant flow it.
Also a huge factor is our climate is 35 degrees celcius with around 90% humidity... Cold air= dense air= more power. Our climate sucks haha
This is why the boys in the UK can make great HP on the TD04 stuff, cold air is great!!
@@Camp_Dogs ahh your videos make alot more sense to me now haha thank you very much for the reply and keep up with the great content!!
Would an intake manifold like this make any difference with a ct9 hybrid? I've heard stock manifold isn't a restriction till 300hp
We made it to 265.... its very hot where i live so i wouldnt be surprised if its capable of making 300+ in cooler weather.
Are you going to be selling these manifolds?
We sold a few but parts cost and labour wasnt viable
Don't you run an Idle control valve?
nah
What size are the velocity stacks and dimensions of the intake manifold do I can see if some one can do it for me
Need to know
over $450 in parts and materials... youre better off buying a chinese one off ebay ready to go...
@@Camp_Dogs oh k thanks 😊 like yours better 😂
Almium how mm?
3mm
Where did you get the velocity stacks?
lots of stores online, also try ebay
@@Camp_Dogs thanks mate. Awesome build learned alot watching this.