For those who want to do this mod. If you don't have HUD, check you have the MOST connector behind the nav screen. My 2019 JCW didn't have the connector so I couldn't do this retrofit.
@@robetus I have seen people without the touch screen installing it, but maybe it’s the smaller non touchscreen that doesn’t have it. It’s easy enough to check though by pulling it out. Should only take 15 minutes.
@@carcreationsyt Okay good to know, thanks. I guess there is no way to tell other than pulling it out. I'll do that before I buy anything for the retrofit. I have a 2020 mini cooper iconic trim. I'll update when I find out
In uk that’s actually illegal so we won’t be able to do same in uk because the car’s mileage is digitally built in to the instrument cluster and uneditable so you can’t edit it and say it has less mileage changing the display completely will show it with 0 miles if you put. A new display in will show low mileage like it’s new plus the instrument cluster needs to be registered to the vehicle for the mileage it isn’t as simple as change it over some cars even have a system where it knows if the instrument cluster has been changed out and it will know if you put a used one in with less mileage too as some have computer memory where it knows that mileage isn’t correct to the ecu as it will keep a data record of the mileage as you drive only time it can be changed is with salvage record certification stating the mileage has changed due to instrument cluster change because of crash but if your caught with a changed instrument cluster and no proof of why it was changed you can get prosecuted and on yours most of the error codes will be because of all I’ve just said the system will know it’s a different instrument cluster and it won’t be programmed for the features on your mini
Yeah it’s a big issue if you install a used cluster. Will throw a tamper error like you mentioned. However in our case we used a brand new cluster that takes on the millage of the car, then code the car to accept it. As soon as we plug in the new cluster it takes on the miles and can’t be used again. All legal and won’t cause any issues.
I really like what you have done. I don't have any problems with the cluster that came with my 20 plate Cooper S so I am unlikely to change it to the digital one but having said that, I may change my mind in the future. I didn't even know it was an easy enough DIY job, apart from the coding.
Congratulations! It shouldn’t be that hard to buy the analog and retrofit it. If it bothers you when you get it, look into it. If you sold the digital one, you might end up making money haha
I didn't realize how low the resolution of the digital cluster is until a sales guy pointed it out at the dealership when I told him I wanted to upgrade mine. I think it's even lower resolution than the small digital screen on the regular one.
Hey, I was able to install the new 6WB digital cluster on my MINI F60.I want to see a video of how the "Engine Oil change service Interval" pop up, can be reset on the new Digital 6WB cluster.Thank You.
Car Creations Yes, would really love the digital cluster for that reason. That, and it just looks more modern! I have a 2019 with the 8.8” touchscreen nav, so I imagine my install/coding would be nearly identical to yours.
Great video! Very helpful as I plan to upgrade soon. Although, as someone who details cars, I did cringe when you were picking up and placing tools on the hood of the car.
So my lovely orange 17 Mini was crushed by a tree so I had to buy a new car... looked at the few hot hatches I could find (not many available) and went back to Mini. I really like the functionality of the new digital dash but the aesthetics of the old dash were a lot nicer. Also... while the Dual Clutch transmission is a huge improvement... the switch gear in the car is a large step back from the nice tactile and well designed switches on the 17. I also don't like the shifter design (going from one that has physical positions for the various transmission modes to one that is basically a joystick)... again an inferior design that replaces simple tactile state feedback with displays. So a mixed bag... lots of improvements but some steps backward.
I am so sorry to hear that, that’s terrible! Yeah I always go back to MINI too! There are definitely pros and cons of both. You could get a low millage older f series and retrofit some of the parts you like about the new one or go the other way. Put some of the older pieces on your newer car.
@@carcreationsyt I think on balance the DCT is such a huge improvement it was worth all the minor annoyances. The entertainment system is also a lot more functional (and I like the additional information available on the dash so while I liked the 'gage cluster' look of the old one the functionality of the new one is a win). Definitely hated losing the 17... probably would have driven it for 4-5 more years (I'm not a 'trade in every 3 years' guy).
Yeah it’s definitely not for everyone. If you want to switch, make sure you get a virginized cluster or you will get your car flagged for mismatched millage
Yeah it should be! Im not sure which number they can use to bring up the display so I will give you all of them. SN:43942044 SW:002.002.002 HW: 01.07.00 BMW Number: 6210: 5A189D6-01 Barcode number: IK5A189D601 Hope that helps! If you don't have the Heads up display you will need a MOST cable but that can be ordered off eBay www.ebay.ca/itm/MOST-Cable-Connector-Fit-for-6WB-6WA-Retrofit-BMW-F30-F31-F32-F33-F34-F10-F25/283700937133?hash=item420de4c1ad:g:lskAAOSwz1pd6Zov
Thanks so much, your welcome! It should work great on your car! Check to make sure you have the MOST port on the back of your head unit, because if you don’t you might not get all the features.
Good idea!! Ill look at doing that! Although there isnt a ton of cost associated with this car. My car is at 35,000 KM and the only maintenance I had to pay for so far was new tires and windshield washer fluid.
Oooh cool ! 2 quick questions .... what about the mileage ? Is it stored on the car and not the cluster ? Also you say a laptop and cable , I have all that , but do I need a program (like ista etc) on my computer for them to remotely code my car/cluster ? Cheers .... Jon 👍🏻
I believe they are stored on both and you need to sync them up and then code the car to accept the cluster. I didn’t do the coding on mine though. Bimmer Fixes remoted into my computer and did the coding super quick. If you tell him I sent you, he might be able to get you a really good deal on the coding.
Very interesting and thanks for your replies/help ❤️ The sync bit (regarding mileage display) did you do that to yours ? And how do you sync them ? Cheers .... Jon 👍🏻
@@jonthebarber As far as I am aware the "EEPROM holds the VIN number and last mileage. As long as the actual true mileage on the vehicle is HIGHER than the KOMBI, the KOMBI will adopt the "new" mileage from the car. " If you want to try and code it your self, a bunch of people did it in this thread here. www.northamericanmotoring.com/forums/f55-f56-hatch-talk-2014/347181-2020-digital-speedo.html Hope that helps!!
Great Job! Just one question how to deal with a software/firmware upgrade in istep for your car? The installation of the display is no a standard in your vehicle equiptment and when MINI Service perform the upgrade during service or vehicle recall it would fail I guess. So how to deal with that? As far as I know since 07/2020 it is not possible anymore to add any upgrades of your car to your vehicle equiptment settings at MINI/BMW.
All the cars we added the display too were older than 07/2020, but I had not heard that about it. We normally just code it to the car and the dealerships dont ever have an issue as it. Do you have a source for that, would be interested looking into it.
@@carcreationsyt The source is my BMW dealership. He told me only official supported equipment (like when I would upgrade to the JCW breaks) can be added to the control units in the vehicle (istep). But equipment which is not officially supported for my car they can't add it. Due to warranty reasons and if there is an update I need to restore it first to the original before I can get the update, otherwise it will fail. (I'm already out of warranty). Maybe it is just my dealership who doesn't really know about this at all or maybe it is country restricted with upgrading. I don't know. It would be interesting what your local or other dealership says about this situation.
You don't need to worry about the MOST cable as there is an extra cable that connects from the old cluster to the heads up display that does the same thing. Just make sure you get a cluster that supports the heads up display
Thanks so much! Yeah unfortunately I don’t think it would work on an R series as the software is quite different. I have seen digital displays for those cars, but nothing as polished as this.
Haha! That would be the perfect gift! It cost me just over €800. I had it sent over to Canada so shipping varies. If you use the code carcreations, BimmerFixes kindly said he would cut €50 from the price.
Hello, thanks so much! Unfortunately I don’t believe it’s compatible with any R series MINIs. I have seen aftermarket digital clusters for the R series, but haven’t been a fan of them.
Hello Ethan. Perhaps you can help me. I just purchased a 2017 2 door S Mini. The speedo and tach combo appears to have spots (dried moisture) on the inside of the faces. It's driving me nuts to see those spots. Is there an easy way to get those faces removed so they can be cleaned on the insides??? Any help would be much appreciated. Thanks!
I believe you are able to although haven't done it myself. There should be some screws behind it that will open the cluster. Be careful though as it may have tamper protection. It may be easier to get a virginized one online.
Thanks so much! Yes, there is a bunch of coding needed. If you want to go ahead with the upgrade, I can get you in contact with BimmerFixes who should be able to help you!
I believe that's how you would do it, however Im sorry, I didn't have to directly deal with that so not 100% sure. Ill check with some of my MINI friends to see if they had to deal with that and have an answer.
My 2020 mini countryman se, came with HUD and top head unit with big screen, but analog cluster. To retrofit is just coding in this case? After swap the cluster of course
Is it possible to do the opposite? I thought the analogue gauges were sharp. The current digital setup is something that would prevent me from buying a Mini past 2019.
We were able to team up with a BMW supplier to get the parts. If your interested send me an Instagram DM or email and I can help set you up with a parts + coding package
This is where I get it from. www.ebay.ca/itm/POF-MOST-6WA-6WB-Retrofit-Optical-Cable-Wire-Stift-Fits-BMW-F20-F30-/114321852855?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
When you install all these extras, what type of device do you code it with, do you have to use a computer, or do you use the code apps on your phone? 👍
We code it with a laptop and a program called Esys. It is an advanced piece of software so may be better getting someone to remote in to do the coding.
@@carcreationsyt so in the new digital cluster will go the existing connector and the optical one from the media? i don t have the head up display, and I see another blue connector on the back of digital display itself
@@adicojocaru6105 Yeah thats correct, the optical MOST cable goes from the entertainment system head unit and is routed through to the digital cluster.
Hi I was wondering if this would fit my 2019 jcw am from India and I would like to know if there are any complications since I have the heads-up display installed already with the car, your advice work be great I follow you on insta and watch all your reviews you are a life saver for all the mini fans Thanks Also what is the cost of the cluster thanks buddy
It definitely would and is an easier installation than without a HUD! Send me a dm on instagram or email with your VIN and I should be able to put together a cost estimate! Thanks!
Thanks! It should work with any F series. A Cooper 2014 and later, clubman 2016 and up, and countryman 2017 and up. You can get the part from MINI themselves or from BimmerFixes. If you use the code Carcreations, BimmerFixes said he would give a discount.
I had minie installed and coded today however the seatbelt warning lamp wont go away and when i unbuckle the sound comes on any idea of how to troubleshoot this? Thank you
I am not sure why that would happen as they should not be related. If you need coding help, send me a dm on Instagram or an email and I can get you in touch with my coder!
@@carcreationsyt hey there Thanks for replying , figured it out finally, since my car only has the seat buckled sensor in the driving seat I think that it was coded for 4 seats , I will let you know if I need any assistance but everything seems fine now Thanks again
I use a AppleCar Play interface that mediates between my HeadUnit & Display.I also use a 3rd Party amplifier from BimmerCode>Match PP86DSP that connects & mediates between my Head unit & Speakers.My HeadUnit itself does not have MOST feature.Can i retrofit the digital cluster?.
I’m about to buy the 2021 mini sport and don’t want to pay for the nav+ pack just to get the digital cockpit. Pretty poor a 20k+ car doesn’t come standard with it. How much is it to buy the cockpit? And would it mess up my warranty by getting it installed?
If its a brand new MINI, it should be compatible. To double check, you could drop the screen and check to see if there is a port for the MOST cable, but I think you would be good. You can see where the port is on my setup at 6:36
@@carcreationsyt I plan to buy the steering wheel with the paddle shifters built into it.would my project be a simple swap & code?.Is there any additional wiring needed from the steering wheel to the car's computer to make it work?.Thanks.
@@varmaTrini If they are built in, its a lot easier than what I have been facing. You may still have to run a wire from the SZL to the module by the door and also code the sports transmission
@@carcreationsyt ok thanks will be in touch Sunday I’m going for holiday will be in touch and one more question what about gear panels it’s able to change for newest to thank you for replying
Very nice job , do u know if I can do that on my Mini One D countryman 2017 diesel ? And do u know where I can find this kind of stuffs ? I live in Italy but obviously I can buy everything on internet… and how much can spend for that ?
haha there wasn't enough time in the video. I do have another video where I go into depth and show every one of its features. th-cam.com/video/YCcXwvWj3ys/w-d-xo.html
My 3rd Party MATCH PP86DSP amplifier quadlock harness has an option for inserting MOST cable, but my headunit does not have the MOST feature.Will this retrofit work?.
Hi great video by the way! One question: I have the Cooper S, if I would upgrade it with the digital cluster too could I get the JCW logo on the screen too or is it impossible to do ? Thank you for helping me out.
I teamed up with a supplier. I could get you one with coding if you want? If so send me a dm on instagram or an email with your vin and a picture of your current unit please!
What is the difference between listing with Part# 62105A189C9 & Part# 62105A189D6.Are they both the same?.Can i use either of them as a Retrofit for my 2018 Petrol MINI Cooper F60?.
Just used your vid to retrofit the digital cluster to my 2019 F57. Thanks for the tips and info. Coding tomorrow by Bimmer Fixes! P.S. great video with Nick over at The MINI vlog!
Yeah for sure! If you have a heads up display, you wont need the cable, but if you dont the same MOST cable will work! I saw both the cluster and cable on ebay for a lot cheeper than I paid recently too! Ill probably be doing the same mod to my 2016 clubman when I get the chance
I have a 19 F60 and just did it. I upgraded to the 8.8” screen with an entrynav2 and the most cable. As Ethan stated it takes some coding but it is very possible.
Hi Guys, I am the owner of a Mini countryman F60 of 2017 leaving in Cyprus. Is it possible to retrofit a digital instrument cluster and if yes who can do the required programming?
Hello! It should if you have an F series! It does have to be coded after the fact, but we include that in the cost of the cluster. If your interested, send me a dm on instagram or an email
I bought mine from Bimmer Fixes as it used to be hard to get. You can get them from MINI but they are often back ordered and need a product number. I think currently the best place to get them is eBay. I noticed a bunch there. Here is the one I saw on eBay. www.ebay.ca/itm/NEW-GENUINE-MINI-F55-F56-PETROL-INSTRUMENT-PANEL-DIGITAL-TFT-CLUSTER-62105A189D6/324397996868?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3Da13e0dec491d41f69e21515236c7f964%26pid%3D100675%26rk%3D11%26rkt%3D15%26mehot%3Dlo%26sd%3D124333351910%26itm%3D324397996868%26pmt%3D0%26noa%3D1%26pg%3D2380057%26brand%3DBMW&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A7c642a69-53b4-11eb-8e59-d6e474e77680%7Cparentrq%3Aef44a13c1760ad343a696a96ffcbf1da%7Ciid%3A1
Hey hi thank you for you few video of retrofit Mini F54 or F56 JCW. I’m owned 2019F54JCW HUD ver. may I ask if I buy this 62105A189D6 Digital Cluster to my F54 it’s fit it ? Or I just can only fit a JCW version and with HUD ? Thanks And I also looking to upgrade to 2021 version CID display board and Steering wheel
Hello, thanks for watching! There are a number of variables. If you send me an instagram dm or an email, please remind me of our conversation, I can help you figure out what you need for everything!
Hello. Where can i find this mos cable? The digital cluster arrived. But the cable inside the box is not there. i found only digital cluster. Thank you
Hello, not every car needs it so they dont have on in the box. Here is a link to one on an eBay listing. www.ebay.ca/itm/MOST-Cable-Connector-Fit-for-6WB-6WA-Retrofit-BMW-F30-F31-F32-F33-F34-F10-F25/283700937133?hash=item420de4c1ad:g:lskAAOSwz1pd6Zov
Hey so this seems super interesting to try except I have a cooper s and not a jcw. Mine is a f56 though with the 6.5 inch infotainment. Is this possible for my mini or do I need to upgrade another thing first?
Sounds like you should be all set to upgrade! Do you have a heads up display? If not, you will need the additional MOST cable to connect the display to the head unit (your entertainment screen).
I would need the most cable, i Knew that. I just didn't know if I had the most update to date infotainment to properly work with the guage screen. Btw where can you buy it? I can't see to find in in stock
Oh ok. Cool. Yeah you don’t need any updates. Just the coding. I got the display right from BimmerFixes, but I have noticed a few on eBay for a good price.
The MOST port on the HeadUnit, does it remain unengaged and connect only to the Digital cluster?.The MOST port on the HeadUnit, is that not already engaged to the Harmon Amplifier in the rear via the 40 Pin Fakra connector?.Do U link to the MOST port on the HeadUnit via the 40 PIN fakra connector?
Unfortunately you would need a new head unit and screen. If you are interested, send me a DM on instagram or an email and I could send you some options for head units. Mention your current situation in the message and please send me your vin and a picture of your current setup.
If the car (Cooper 1.5 2019) does not have HUD and the Head Unit does not have GPS (my HeadUnit is HU-B, 6.5”). MOST Cable to Digital Cluster should not be needed. Right?
While I know the head unit is used for Navigation, it may be also used for showing music tracks too, not 100% sure though. If you dont need either of those, then you should be good without it, however I would check with BimmerFixes, if you are going to use him, just to be sure. He codes a ton of them so has experienced every situation.
Thanks so much! Unfortunately you cant do it with BimmerCode. I believe you have to code deeper areas around the VIN and Tac, which is why I really encourage people to get it done professionally by BimmerFixes or someone like that.
Unfortunately if you try to use a used cluster you can get a tamper error and have to remove the cluster and then bring it to a dealership and pay a lot to remove the error. Only get a brand new cluster or one that has been virginized.
If you have a look on eBay, you may be able to find one. If you want one precoded and coded to you car, send me a dm on instagram or an email and I can get you setup
@@carcreationsyt That’s really helpful to know for future reference. It does seem that they could have done a whole lot more with the cluster, but it does looks nice and contemporary, but having the option of analogue would be good on a new one 😀
For those who want to do this mod. If you don't have HUD, check you have the MOST connector behind the nav screen. My 2019 JCW didn't have the connector so I couldn't do this retrofit.
Thanks for the info! I wasnt aware of that.
Do have the 8.8" touchscreen in your mini? I think the MOST connector is only on the touchscreen minis.
@@robetus I have seen people without the touch screen installing it, but maybe it’s the smaller non touchscreen that doesn’t have it. It’s easy enough to check though by pulling it out. Should only take 15 minutes.
@@carcreationsyt Okay good to know, thanks. I guess there is no way to tell other than pulling it out. I'll do that before I buy anything for the retrofit. I have a 2020 mini cooper iconic trim. I'll update when I find out
@@robetus yeah it’s a good idea to check. Cool, sounds good let us know how it goes!
In uk that’s actually illegal so we won’t be able to do same in uk because the car’s mileage is digitally built in to the instrument cluster and uneditable so you can’t edit it and say it has less mileage changing the display completely will show it with 0 miles if you put. A new display in will show low mileage like it’s new plus the instrument cluster needs to be registered to the vehicle for the mileage it isn’t as simple as change it over some cars even have a system where it knows if the instrument cluster has been changed out and it will know if you put a used one in with less mileage too as some have computer memory where it knows that mileage isn’t correct to the ecu as it will keep a data record of the mileage as you drive only time it can be changed is with salvage record certification stating the mileage has changed due to instrument cluster change because of crash but if your caught with a changed instrument cluster and no proof of why it was changed you can get prosecuted and on yours most of the error codes will be because of all I’ve just said the system will know it’s a different instrument cluster and it won’t be programmed for the features on your mini
Yeah it’s a big issue if you install a used cluster. Will throw a tamper error like you mentioned.
However in our case we used a brand new cluster that takes on the millage of the car, then code the car to accept it. As soon as we plug in the new cluster it takes on the miles and can’t be used again.
All legal and won’t cause any issues.
I really like what you have done. I don't have any problems with the cluster that came with my 20 plate Cooper S so I am unlikely to change it to the digital one but having said that, I may change my mind in the future. I didn't even know it was an easy enough DIY job, apart from the coding.
Thanks! Yeah I mainly added it because it adds some functionality that the other one didn’t have and also puts the speed in my line of vision.
We get our Cooper S end of December and it comes standard with the digital dash but to honest I prefer the analogue!
Congratulations! It shouldn’t be that hard to buy the analog and retrofit it. If it bothers you when you get it, look into it. If you sold the digital one, you might end up making money haha
Great video! This has been a much needed video for a while, well done!
Thanks so much! I hope the MINI community can make use of it!
@@carcreationsyt I am sure they will!
Many thanks for this, Ive just bought the cluster in the UK and will be looking to install into a 2015 F56 JCW
Your most welcome! Let us know how it goes!
How it go?
@@sr46373 All perfect, i used Bimmerfix to code, took 10 mins..
How much was the cluster?
@@bokiNYC it’s 800 euros. Depending on where you get it
I didn't realize how low the resolution of the digital cluster is until a sales guy pointed it out at the dealership when I told him I wanted to upgrade mine. I think it's even lower resolution than the small digital screen on the regular one.
Yeah it’s true!
It’s normally far enough away that I don’t notice it but it’s an annoying detail
Hey, I was able to install the new 6WB digital cluster on my MINI F60.I want to see a video of how the "Engine Oil change service Interval" pop up, can be reset on the new Digital 6WB cluster.Thank You.
Congrats!! Thanks for the idea! Ill take a look and see what I can do
Excellent! I love ❤️ your videos!! The best ones in TH-cam.
Thank you so much! Really appreciate the love!
Hi, This was very helpful. My HeadUnit does not have feature for MOST & I also do not have HeadsUp display. Can i upgrade?.
Fantastic, been looking for someone with an LCI F5X without the HUD who’s done the retrofit. Looks great!
Thanks so much! It brings navigation right to the display too, which was one of the things I didn't have for lack of HUD, would totally recommend!
Car Creations Yes, would really love the digital cluster for that reason. That, and it just looks more modern! I have a 2019 with the 8.8” touchscreen nav, so I imagine my install/coding would be nearly identical to yours.
Yeah it would be exactly the same. Just use a magnetic screwdriver so you dont loose the screws!! Haha 😂
Great video! Very helpful as I plan to upgrade soon. Although, as someone who details cars, I did cringe when you were picking up and placing tools on the hood of the car.
Thanks! Yeah… a few have said that. It had protection on it so didn’t think it mattered and liked the shot, but it’s probably still not the best idea.
Great work, have ever tried to retrofit your steptronic automatic Gear Knob to the Tap one( 2020+)
?
As I am gonna do it very soon, just been searching for someone posted how to do it😍
Unfortunately I don’t think you can unless you change the entire transmission as the tap one uses electronics and the older one like mine uses wires.
If you figure out a way that proves me wrong, please let me know! I would love to do it too!
Analog is king!
Ill probably feel that way in a few years when everything is electric!
This is a mod I would like to do, you mentioned you had no HUD, I do, how does this make a difference? Cheers.
It would just make it a lot easier for you. All you would have to do is replace the cluster. No fussing with MOST cables and the head unit.
@@carcreationsyt Good stuff, by the way, I am John, admin on JCW Owners Club on fb, post more stuff like this, it's what we need.
Intersteller oh awesome! Welcome to the channel!! I definitely will be posting more as I totally love this stuff!
So my lovely orange 17 Mini was crushed by a tree so I had to buy a new car... looked at the few hot hatches I could find (not many available) and went back to Mini. I really like the functionality of the new digital dash but the aesthetics of the old dash were a lot nicer. Also... while the Dual Clutch transmission is a huge improvement... the switch gear in the car is a large step back from the nice tactile and well designed switches on the 17. I also don't like the shifter design (going from one that has physical positions for the various transmission modes to one that is basically a joystick)... again an inferior design that replaces simple tactile state feedback with displays. So a mixed bag... lots of improvements but some steps backward.
I am so sorry to hear that, that’s terrible! Yeah I always go back to MINI too!
There are definitely pros and cons of both.
You could get a low millage older f series and retrofit some of the parts you like about the new one or go the other way. Put some of the older pieces on your newer car.
@@carcreationsyt I think on balance the DCT is such a huge improvement it was worth all the minor annoyances. The entertainment system is also a lot more functional (and I like the additional information available on the dash so while I liked the 'gage cluster' look of the old one the functionality of the new one is a win).
Definitely hated losing the 17... probably would have driven it for 4-5 more years (I'm not a 'trade in every 3 years' guy).
Had the same guys code mine a month back, great service.
Yeah, could not be happier! Will be looking to see what other things we can code!
I want the complete opposite LOL
I do have the digital on mine but want the analog one. (I like it better)
It’s definitely possible!
Good stuff will do same.. tou have part nr most cable for me ..
Thanks! Send me an Instagram DM or email and I can help you out!
I would much rather have the tachometer over the digital. My 2023 is digital and I think old school tachometer looks way better.
Yeah it’s definitely not for everyone. If you want to switch, make sure you get a virginized cluster or you will get your car flagged for mismatched millage
Wow awesome !!! I have a 2017 mini clubman s with HUD display , will this work.
Nice! Same year as my other MINI! Yeah that will work really well, and you wont need the MOST cable as you have a heads up display.
Amazing job you donee
Thanks so much!
Amazing video, one question I have a 2019 mini JCW convertible and comes with HUD, you think this new display fits well? Thanks…
Thanks!! Yes it would and you would not need the most cable!
If your interested in a unit plus coding send me a dm on Instagram or an email
Great! Do you have the link for clustr with HUD conection?
Send me a dm in insta or an email and I can help you out
Wow! Cool mod! Keep it up! This is definitly some very quality content!
Thanks! The new display really transforms the car!
Is this also possible for a clubman cooper from 2016 ? What are the partnumbers for the needed parts?
Yeah it should be! Im not sure which number they can use to bring up the display so I will give you all of them. SN:43942044 SW:002.002.002 HW: 01.07.00 BMW Number: 6210: 5A189D6-01 Barcode number: IK5A189D601
Hope that helps!
If you don't have the Heads up display you will need a MOST cable but that can be ordered off eBay www.ebay.ca/itm/MOST-Cable-Connector-Fit-for-6WB-6WA-Retrofit-BMW-F30-F31-F32-F33-F34-F10-F25/283700937133?hash=item420de4c1ad:g:lskAAOSwz1pd6Zov
Where did you buy the digital display?
@@SirGiggz I got Bimmer Fixes to send it. MINI said it would take three months to get to Canada
Hello, just wondering where I can get everything for 2013 Mini Cooper S.
Hi thanks for your video I have question where I get the screen from?
I prefer the old ones .
The good news is, you can fit the older style onto a new on and probably make money on it!
Showing attachment of cables would help
Sorry our footage did not turn out properly for that. There should be two different cables and they are super easy to plug in!
Will this work on 2018 countryman s ? AWESOME DIY Thanks for sharing
Thanks so much, your welcome! It should work great on your car! Check to make sure you have the MOST port on the back of your head unit, because if you don’t you might not get all the features.
Hi, I’m looking forward to buying a Mini Cooper, please can you do a video of its monthly maintenance cost, thank you
Good idea!! Ill look at doing that! Although there isnt a ton of cost associated with this car. My car is at 35,000 KM and the only maintenance I had to pay for so far was new tires and windshield washer fluid.
Brilliant vid ! I have the clubman F54 with HUD , I’m guessing it’ll work on mine ? 👍🏻
It will for sure!
Oooh cool ! 2 quick questions .... what about the mileage ? Is it stored on the car and not the cluster ? Also you say a laptop and cable , I have all that , but do I need a program (like ista etc) on my computer for them to remotely code my car/cluster ? Cheers .... Jon 👍🏻
I believe they are stored on both and you need to sync them up and then code the car to accept the cluster. I didn’t do the coding on mine though. Bimmer Fixes remoted into my computer and did the coding super quick. If you tell him I sent you, he might be able to get you a really good deal on the coding.
Very interesting and thanks for your replies/help ❤️ The sync bit (regarding mileage display) did you do that to yours ? And how do you sync them ? Cheers .... Jon 👍🏻
@@jonthebarber As far as I am aware the "EEPROM holds the VIN number and last mileage. As long as the actual true mileage on the vehicle is HIGHER than the KOMBI, the KOMBI will adopt the "new" mileage from the car. " If you want to try and code it your self, a bunch of people did it in this thread here. www.northamericanmotoring.com/forums/f55-f56-hatch-talk-2014/347181-2020-digital-speedo.html Hope that helps!!
Great Job! Just one question how to deal with a software/firmware upgrade in istep for your car? The installation of the display is no a standard in your vehicle equiptment and when MINI Service perform the upgrade during service or vehicle recall it would fail I guess. So how to deal with that? As far as I know since 07/2020 it is not possible anymore to add any upgrades of your car to your vehicle equiptment settings at MINI/BMW.
All the cars we added the display too were older than 07/2020, but I had not heard that about it. We normally just code it to the car and the dealerships dont ever have an issue as it. Do you have a source for that, would be interested looking into it.
@@carcreationsyt The source is my BMW dealership. He told me only official supported equipment (like when I would upgrade to the JCW breaks) can be added to the control units in the vehicle (istep).
But equipment which is not officially supported for my car they can't add it. Due to warranty reasons and if there is an update I need to restore it first to the original before I can get the update, otherwise it will fail. (I'm already out of warranty).
Maybe it is just my dealership who doesn't really know about this at all or maybe it is country restricted with upgrading. I don't know.
It would be interesting what your local or other dealership says about this situation.
Question, my MINI has head up display. If I want to do this retrofit, do I need to connect the MOS cable or just install the new cluster and code it?
You don't need to worry about the MOST cable as there is an extra cable that connects from the old cluster to the heads up display that does the same thing. Just make sure you get a cluster that supports the heads up display
I need the interior light change for my clubman 2016 Rhd
Check out ebay, that usually has everything you need
Cool mod mate. Wonder how this would look in an R50 MINI? Would that even be possible?
Thanks so much! Yeah unfortunately I don’t think it would work on an R series as the software is quite different. I have seen digital displays for those cars, but nothing as polished as this.
@@carcreationsyt no worries mate, wishful thinking on my part. :-) Good luck with the rest of the mod. Cheers
Thank you!!
Can I fit this in a 2016 clubman
Good work - I now know what I want for Christmas - what did It and the coding cost?
Haha! That would be the perfect gift! It cost me just over €800. I had it sent over to Canada so shipping varies. If you use the code carcreations, BimmerFixes kindly said he would cut €50 from the price.
Hello!!
Nice video!!
Do you know if this is compatible for countryman r60?
Thank you!!
Hello, thanks so much! Unfortunately I don’t believe it’s compatible with any R series MINIs. I have seen aftermarket digital clusters for the R series, but haven’t been a fan of them.
@@carcreationsyt Ok , thank you!!
@@benjiprice7772 anytime!!
Nice job! We're did you buy the digital cluster? Thanks
Thanks so much! I bought mine off BimmerFixes, however you can also order them directly from MINI or even eBay.
@@carcreationsyt thanks pal! ;)
Any time!
Hello Ethan. Perhaps you can help me. I just purchased a 2017 2 door S Mini. The speedo and tach combo appears to have spots (dried moisture) on the inside of the faces. It's driving me nuts to see those spots. Is there an easy way to get those faces removed so they can be cleaned on the insides??? Any help would be much appreciated. Thanks!
I believe you are able to although haven't done it myself. There should be some screws behind it that will open the cluster. Be careful though as it may have tamper protection. It may be easier to get a virginized one online.
@@carcreationsyt Thanks for that. I'll do a bit more checking into it.
@@garygrubb497 no worries!
Long shot but here goes nothing. Would the digital HUD work or be compatible in an F55 2016 version?
If your current head unit has a most cable port, yes. If you currently have a heads up display, also yes!
Could it be posible on a mini cooper s 2017 f56? Thank you great channel
Yes it can! Send me a dm on instagram or an email if your interested in getting one!
That’s so much for watching!
Love you MINI...Quit Question.... Are there any coding with this upgrade?
Thanks so much! Yes, there is a bunch of coding needed. If you want to go ahead with the upgrade, I can get you in contact with BimmerFixes who should be able to help you!
Great video. Does this work with Diesel models?
Thanks! I believe so! Just check the back of your head unit to see if it has the port for a MOST cable. If so, you should be good!
Can the MOST PORT, on the HeadUnit be shared between the Digital Amplifier in the rear & the Speedometer using a MOST splitter?.
I believe that's how you would do it, however Im sorry, I didn't have to directly deal with that so not 100% sure. Ill check with some of my MINI friends to see if they had to deal with that and have an answer.
My 2020 mini countryman se, came with HUD and top head unit with big screen, but analog cluster.
To retrofit is just coding in this case? After swap the cluster of course
If you send me a dm on instagram with your vin and I can try to look into it for you
@@carcreationsytsended days ago. You didn't answer
Is it possible to do the opposite? I thought the analogue gauges were sharp. The current digital setup is something that would prevent me from buying a Mini past 2019.
Yeah 100%
Actually a lot of the new cars are missing the digital cluster right now due to parts shortages
Can you put a link for where did you purchase the digital cluster?
We were able to team up with a BMW supplier to get the parts. If your interested send me an Instagram DM or email and I can help set you up with a parts + coding package
I lost my screw too, where did you find yours
Oh no!
It fell down behind the knee guard. Although it was hardly sitting there so check the floor too
Can you please tell me what is the MOST CABLE part # and where can it get it From , I have a 2019 mini jcw Cooper 2 door hard top
This is where I get it from.
www.ebay.ca/itm/POF-MOST-6WA-6WB-Retrofit-Optical-Cable-Wire-Stift-Fits-BMW-F20-F30-/114321852855?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
When you install all these extras, what type of device do you code it with, do you have to use a computer, or do you use the code apps on your phone? 👍
We code it with a laptop and a program called Esys. It is an advanced piece of software so may be better getting someone to remote in to do the coding.
Always good taking the plastic cover off
The best part of every unboxing!
So nice - indeed you purchased the MOST cable separately?
BimmerFixes sent it with the cluster when I bought it, but if you buy a cluster off MINI or eBay, you will need to buy it separately.
@@carcreationsyt so in the new digital cluster will go the existing connector and the optical one from the media? i don t have the head up display, and I see another blue connector on the back of digital display itself
@@adicojocaru6105 Yeah thats correct, the optical MOST cable goes from the entertainment system head unit and is routed through to the digital cluster.
Do you have a link for the most cable...i ve purchased one localy , but it is for vag group and it does not fit :(
@@adicojocaru6105 oh rats! Yeah for sure, here is a link to an eBay listing. www.ebay.ca/itm/283700937133
Hi I was wondering if this would fit my 2019 jcw am from India and I would like to know if there are any complications since I have the heads-up display installed already with the car, your advice work be great I follow you on insta and watch all your reviews you are a life saver for all the mini fans
Thanks
Also what is the cost of the cluster thanks buddy
It definitely would and is an easier installation than without a HUD! Send me a dm on instagram or email with your VIN and I should be able to put together a cost estimate! Thanks!
Very nice. Well done
Thanks so much!
Can I purchase one of a 2015 S. ??? If so were ? Thanks 😊 cool vid
Thanks! It should work with any F series. A Cooper 2014 and later, clubman 2016 and up, and countryman 2017 and up.
You can get the part from MINI themselves or from BimmerFixes. If you use the code Carcreations, BimmerFixes said he would give a discount.
I had minie installed and coded today however the seatbelt warning lamp wont go away and when i unbuckle the sound comes on any idea of how to troubleshoot this? Thank you
I am not sure why that would happen as they should not be related. If you need coding help, send me a dm on Instagram or an email and I can get you in touch with my coder!
@@carcreationsyt hey there
Thanks for replying , figured it out finally, since my car only has the seat buckled sensor in the driving seat I think that it was coded for 4 seats , I will let you know if I need any assistance but everything seems fine now
Thanks again
I use a AppleCar Play interface that mediates between my HeadUnit & Display.I also use a 3rd Party amplifier from BimmerCode>Match PP86DSP that connects & mediates between my Head unit & Speakers.My HeadUnit itself does not have MOST feature.Can i retrofit the digital cluster?.
I’m about to buy the 2021 mini sport and don’t want to pay for the nav+ pack just to get the digital cockpit. Pretty poor a 20k+ car doesn’t come standard with it. How much is it to buy the cockpit? And would it mess up my warranty by getting it installed?
Sorry for the late response! Send me a dm on instagram or an email with your vin and I can help you out!
Hi,
I wanna install in my f55 2015 cooper s 5D. Can you please send me link where I can buy it. TIA 😊
Hello, I can help you find an unit that will fit your car! Send me a dm on Instagram or an email and I can help you out!
Is this possible for a mini one ? I ordered from the shop and the sales man didn't tell me my car doesn't come with this....
If its a brand new MINI, it should be compatible. To double check, you could drop the screen and check to see if there is a port for the MOST cable, but I think you would be good. You can see where the port is on my setup at 6:36
Do you know if it's possible to do in a Coutryman SE?
Yes it is! Send me a dm on Instagram or an email if your interested!
Hi! How can I get this digital cluster in France ? And what about the compatibility with my F56 (2014) ?
Hello! It is possible, send me a dm on Instagram or an email with a picture of your current unit and I can help you get one with coding
Hi, Were you able to complete the Paddle shifters project?.
We will have an update on that soon. Some of the parts we got where defective so the project has carried on a bit.
@@carcreationsyt Thanks much. Appreciate your efforts.
@@carcreationsyt I plan to buy the steering wheel with the paddle shifters built into it.would my project be a simple swap & code?.Is there any additional wiring needed from the steering wheel to the car's computer to make it work?.Thanks.
@@varmaTrini If they are built in, its a lot easier than what I have been facing. You may still have to run a wire from the SZL to the module by the door and also code the sports transmission
How much cost you all together to do in your garage
Around 7-800 euros.
If you are interested send me a dm and I can get you an exact quote for a system like mine with coding
@@carcreationsyt ok thanks will be in touch Sunday I’m going for holiday will be in touch and one more question what about gear panels it’s able to change for newest to thank you for replying
why do you have to add this cable?
Exchange and coding alone is not enough?
Yes you have to add it if you dont have a heads up display
I highly doubt it as my car is a 2013 Cooper S but would this be possible in the older gen models or only 2014 and on?
Sadly only 2014 and on
@@carcreationsyt my heart break into 1000 tiny little pieces ;(
@@_cam_17 Sorry... :(
@@carcreationsyt nothin to be sorry about thanks for the zippy response so I didn’t waste a ton of time trying to figure out how to do it
Very nice job , do u know if I can do that on my Mini One D countryman 2017 diesel ? And do u know where I can find this kind of stuffs ? I live in Italy but obviously I can buy everything on internet… and how much can spend for that ?
Hello, I noticed your other comment too, when you send me an email or dm I can add that to the quote.
Why not show many pictures for new digital cluster ?
haha there wasn't enough time in the video. I do have another video where I go into depth and show every one of its features. th-cam.com/video/YCcXwvWj3ys/w-d-xo.html
@@carcreationsyt okay 👌🏻
My 3rd Party MATCH PP86DSP amplifier quadlock harness has an option for inserting MOST cable, but my headunit does not have the MOST feature.Will this retrofit work?.
Hey. I’ve got 2012 Mini Countryman, do you think it’d be compatible with that too..??
Unfortunately it only works with F series
So if you have a heads up display it just plugs into that rather than the head unit?
That’s correct. It’s easier as you won’t have to run a wire through your dash.
Hi great video by the way!
One question: I have the Cooper S, if I would upgrade it with the digital cluster too could I get the JCW logo on the screen too or is it impossible to do ? Thank you for helping me out.
Hello, thanks for the question. I believe you have to code it to have either the gp or jcw logo. By default it doesn’t have anything there.
Where did you get the digital cluster ? Link please
I teamed up with a supplier. I could get you one with coding if you want? If so send me a dm on instagram or an email with your vin and a picture of your current unit please!
Can the JCW logo be activated/deactivated on the Digital Speedo?.
I think you may need the file, but its definitely possible.
What is the difference between listing with Part# 62105A189C9 & Part# 62105A189D6.Are they both the same?.Can i use either of them as a Retrofit for my 2018 Petrol MINI Cooper F60?.
Possibly one is electric and the other petrol? Maybe check on eBay and see what the part number is for the cluster that fits your car.
Did the package you received from UK include OBD cable/adapter, so Bimmer Fixes can code remotely over TeamViewer?
He offered to send it too, but I already had one.
Just used your vid to retrofit the digital cluster to my 2019 F57. Thanks for the tips and info. Coding tomorrow by Bimmer Fixes! P.S. great video with Nick over at The MINI vlog!
Oh exciting!! Good to know you found the tips useful.
Thanks so much, it was a lot of fun!
Could this be done to a ‘19 Countryman? And would all the same cables et al apply? This would be the coolest mod!!
Yeah for sure! If you have a heads up display, you wont need the cable, but if you dont the same MOST cable will work! I saw both the cluster and cable on ebay for a lot cheeper than I paid recently too! Ill probably be doing the same mod to my 2016 clubman when I get the chance
I have a 19 F60 and just did it. I upgraded to the 8.8” screen with an entrynav2 and the most cable. As Ethan stated it takes some coding but it is very possible.
One question,I have a 2012 mini cooper s R60, does it work with my car ?
Unfortunately only f series, sorry
Hi Guys, I am the owner of a Mini countryman F60 of 2017 leaving in Cyprus. Is it possible to retrofit a digital instrument cluster and if yes who can do the required programming?
Yes for sure! Send me a dm on instagram or an email and I’ll help you out!
Hello friend, I have a Mini Cooper S 2017, does this Instrument Cluster work on my Mini? Does this part have any code?
Hello! It should if you have an F series! It does have to be coded after the fact, but we include that in the cost of the cluster. If your interested, send me a dm on instagram or an email
I’m sure I overlooked it but where can you buy this at. I have been looking for a while but I can’t find it.
I bought mine from Bimmer Fixes as it used to be hard to get. You can get them from MINI but they are often back ordered and need a product number. I think currently the best place to get them is eBay. I noticed a bunch there. Here is the one I saw on eBay. www.ebay.ca/itm/NEW-GENUINE-MINI-F55-F56-PETROL-INSTRUMENT-PANEL-DIGITAL-TFT-CLUSTER-62105A189D6/324397996868?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3Da13e0dec491d41f69e21515236c7f964%26pid%3D100675%26rk%3D11%26rkt%3D15%26mehot%3Dlo%26sd%3D124333351910%26itm%3D324397996868%26pmt%3D0%26noa%3D1%26pg%3D2380057%26brand%3DBMW&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A7c642a69-53b4-11eb-8e59-d6e474e77680%7Cparentrq%3Aef44a13c1760ad343a696a96ffcbf1da%7Ciid%3A1
Hey hi thank you for you few video of retrofit Mini F54 or F56 JCW. I’m owned 2019F54JCW HUD ver.
may I ask if I buy this 62105A189D6 Digital Cluster to my F54 it’s fit it ? Or I just can only fit a JCW version and with HUD ? Thanks
And I also looking to upgrade to 2021 version CID display board and Steering wheel
Hello, thanks for watching! There are a number of variables. If you send me an instagram dm or an email, please remind me of our conversation, I can help you figure out what you need for everything!
@@carcreationsyt Oh ! Thank you so Much ! I will DM you later . Cheers
@@carcreationsyt hey I sent you DM in iG .cheers
If I have the hud do I need most cable if not where do I get it
You don’t need a most cable!
If your interested in a unit, send me a dm on instagram or an email and I can help you out
Hello. Where can i find this mos cable? The digital cluster arrived. But the cable inside the box is not there. i found only digital cluster. Thank you
Hello, not every car needs it so they dont have on in the box. Here is a link to one on an eBay listing. www.ebay.ca/itm/MOST-Cable-Connector-Fit-for-6WB-6WA-Retrofit-BMW-F30-F31-F32-F33-F34-F10-F25/283700937133?hash=item420de4c1ad:g:lskAAOSwz1pd6Zov
@@carcreationsyt Thank you very much for the information 😊
@@josefel7647 Glad to help!!
Where can I buy the MOST cable? Can’t find it on the web. Thx
I got mine on eBay. www.ebay.ca/itm/283700937133
My vehicle does not come with a MOST feature.Can i retrofit a MOST interface onto the HeadUnit?.
Does the most connect into the quad lock on the back of the headunit?
Yes that’s correct.
You have to check that there is a most port under it though. Some head units don’t have it.
Hey so this seems super interesting to try except I have a cooper s and not a jcw. Mine is a f56 though with the 6.5 inch infotainment. Is this possible for my mini or do I need to upgrade another thing first?
Sounds like you should be all set to upgrade! Do you have a heads up display? If not, you will need the additional MOST cable to connect the display to the head unit (your entertainment screen).
I would need the most cable, i Knew that. I just didn't know if I had the most update to date infotainment to properly work with the guage screen. Btw where can you buy it? I can't see to find in in stock
Oh ok. Cool. Yeah you don’t need any updates. Just the coding. I got the display right from BimmerFixes, but I have noticed a few on eBay for a good price.
Hi where I get the screen from?
The MOST port on the HeadUnit, does it remain unengaged and connect only to the Digital cluster?.The MOST port on the HeadUnit, is that not already engaged to the Harmon Amplifier in the rear via the 40 Pin Fakra connector?.Do U link to the MOST port on the HeadUnit via the 40 PIN fakra connector?
Good question, I didn't have to deal with that on my car so am not 100% sure. If I find out, I will let you know.
Where can I buy the digital display?
You can order it directly from mini, I put the part numbers and on another comment, or Bimmer Fixes might be able to sort you out.
Is it possible to install it on a 2014 f56 without the navigation screen?
Unfortunately you would need a new head unit and screen. If you are interested, send me a DM on instagram or an email and I could send you some options for head units. Mention your current situation in the message and please send me your vin and a picture of your current setup.
If the car (Cooper 1.5 2019) does not have HUD and the Head Unit does not have GPS (my HeadUnit is HU-B, 6.5”). MOST Cable to Digital Cluster should not be needed. Right?
While I know the head unit is used for Navigation, it may be also used for showing music tracks too, not 100% sure though.
If you dont need either of those, then you should be good without it, however I would check with BimmerFixes, if you are going to use him, just to be sure.
He codes a ton of them so has experienced every situation.
Boas, trocou pelo digital? Tenho a mesma dúvida.
Great video, can you do the coding with BimmerCode?
Thanks so much! Unfortunately you cant do it with BimmerCode. I believe you have to code deeper areas around the VIN and Tac, which is why I really encourage people to get it done professionally by BimmerFixes or someone like that.
Can i use used new mini cooper screen for my f55 mini?
Unfortunately if you try to use a used cluster you can get a tamper error and have to remove the cluster and then bring it to a dealership and pay a lot to remove the error. Only get a brand new cluster or one that has been virginized.
Can you post a link to the digital cluster please
If you have a look on eBay, you may be able to find one. If you want one precoded and coded to you car, send me a dm on instagram or an email and I can get you setup
Does the coding works with 2015 F56?
Yes, as long as your head unit has the MOST port, the cluster will be compatible
I prefer the analogue system. That looks very fandango 😂
😂 yeah its definitely a preference thing. If you get a car with it, you should be able to install the analog one though!
@@carcreationsyt That’s really helpful to know for future reference. It does seem that they could have done a whole lot more with the cluster, but it does looks nice and contemporary, but having the option of analogue would be good on a new one 😀
@@Dr_MattS 100% agree! Personally I think it would depend on the look I was going for with my spec. Modern vs classic