As flagpoles are not standardized, I can't say. You may want to post photos in our facebook group "HolidayCoro Official Support Group" for more detailed feedback.
The length of the strips should be the total number of feet (printed on the roll or on your order) divided by 16. For example, if you received 320 feet of strip, you would cut each strip 20ft long.
@@davidmoore6537 ok. I have a 10.8 tree and was just wondering if I had to make them exactly 13.25 ft. Cause I was trying to figure out how tall the tree would be once it was put together. I’m just a little lost on why there would some much extra left over without pixels in the strips.
If I have a 10.8 tree how long of a pole should I use?
I would recommend purchasing a 10ft pole and making your tree a slight bit wider.
if Im using a flag pole that has the hole drilled in the top, How do you coonect the topper so you can add in the star?
As flagpoles are not standardized, I can't say. You may want to post photos in our facebook group "HolidayCoro Official Support Group" for more detailed feedback.
Do the strips have to be cut at 13.25 ft or could it be cut at 12 ft?
The length of the strips should be the total number of feet (printed on the roll or on your order) divided by 16. For example, if you received 320 feet of strip, you would cut each strip 20ft long.
@@davidmoore6537 ok. I have a 10.8 tree and was just wondering if I had to make them exactly 13.25 ft. Cause I was trying to figure out how tall the tree would be once it was put together. I’m just a little lost on why there would some much extra left over without pixels in the strips.
Reach out to our support at www.holidaycoro.com/contactus and we can provide more specific advice.