The 307 (I own one) is an easy car to work with, many things are user-friendly, but not the spare wheel for sure. I removed mine for inspection after watching this video, it looked alright, put it back, but it looks I haven't placed it back properly (the problem was with the cover of the car jack) and it fell down once on the road. It was loud! Then a friend helped me to place it back properly, but then I used it again for a flat tyre and it is still in my trunk now. Time to put it back again. Stupid design for sure. But thank you for the explanation. Helpful :)
I have a 307 SW aswell, that mechanism has a fault. The cable you see in the video is lowered and raised with the help of 2 gears, sometimes those gears will smash the cable into pieces and the wheel will be stuck (I had that problem). If you can hear and feel skipping of gears and grinding most probably the main cable is already stuck, if that is the case and your wheel is still in the highest position possible, the only way to remove the wheel will be by using pliers to cut the cable from underneath the back of the car. If that is not the case and everything went smoothly when you lower and remove the wheel make sure there is still some force pulling the cable down, otherwise it could go out of aligment and get smashed during raising of the wheel. IMPORTANT: If you are going to lower the wheel and you plastic piece covering the bolt for the wrench is broken you will need to find a way to grab whatever is left and pull it up (you can use self screwing bolts) It's not appearant on the video but there is a 2-nd cable attached with that plastic piece and it is holding a hook (the thing attaching the cable to the plastic box), if you do not do this most probably the main cable will be smashed by the gears.
What a faf! Imagine having to do this on a rainy/cold dark night beside a high road or middle of a hard terrain! What about the less able people ie: ladies, older etc... ? THUMBS ALL THE WAY DOWN for Peugeot. Thanks for the demo though! You must have saved lives by doing this.
That's why when the system is properly used and in good working order. It's so much easier than most other systems!! Yep, surprising isn't it?! Older people, ladies, etc. will have a big help from this system, IF they KNOW how to use it. Point being. Knowing how to do it, you'll have to lift the tire just once! To set it on the hub and that's it! What about that for the old people, the ladies, etc. ;-) Just because you watched on YT a poorly used and explained system. DO NOT skip using a proper manual... ;-)
The very slightly easier way to remove the wheel is to unhook the winch wire from the jack storage box. Once tension is off the wire it should be possible to push the "hook" hidden on the end of the wire in and off centre then just pull it out. Also check the winch works annually and lubricate it. The first time I needed to use it it jammed completely part way down, All I had to do was cut the wire so I could remove the wheel and jack. It only took about an hour . Then I could change the punctured tyre and spend a couple of hundred on a replacement winch. Brilliant Puegeot engineering.
You can remove the wire without opening the box. Just release the wire until the wheel touches the ground, once the wire is no longer tensioned you can remove it with ease. Great car Peugeot 307 sw
Hi Miron, Thanks for the comment! I tried to lower down the wheel completely at the beginning. This is where the "5 minutes later" text appears. I turned the key in one direction and observed how the wheel releases (moves downwards) from the car. The problem is that when the wheel went about half way down it suddenly started moving up again without me changing the torque direction. My release mechanism is most probably rusty or simply old. I moved the wheel up and down couple of times before I reached the level shown in the video. Unfortunately I could not go lower then that. It is a good thing you pointed that out and I believe that your comment will be useful for people watching. Thanks again!
Hi mate! The winch is a common problem. The cable gets twisted up inside. It is very important for the cable to be tensioned when you are releasing it and when you lift as well, othervise the wire gets jammed like in your case. Normaly the cable is long enough not only to realease the whell to the ground but you should be able almost to pull it completely out (at my 307 is quite difficult because the towbar). Please carry on to be always oiled, this will slow down the cable grinding proces, it is a very squeamish mechanism, risky to service and a replacement is around £100. I'am looking forward to hearing good news from you.
Hi mate! Just done the video we were talking about :) Check it out if you have a spare moment. Topic: WINCH REPLACEMENT + what is inside. LINK: th-cam.com/video/mFwIIy2meGc/w-d-xo.html Cheers!
Very special way of hiding a spear wheel. The wheel will rust and it is smart to check it now and then and remove any attack of rust and repaint the spots. Or even better, get a used wheel in aluminium at a car demolishing station. May be it is smart to put it in a a solid plastic bag before putting it in place. just remember to put a couple of draining holes in the bag, in case humidity manages to enter it.
C4 GP has the same crappy system installed. No obvious way to release it and can just imagine the fun trying to do this in the dark by the side of the road. I was lucky the tyre didn't deflate until I was home and was able to spend time indoors in a nice warm room trying to find out how to release the rotten thing. The old citroen system was a metal holder that was hinged - much better. Why in the name of sanity would they go backwards to such a rubbish system? Thanks for the video - it has been a life saver.
La rueda se puede liberar fácilmente si desenrollamos totalmente el cable y toca el suelo. Es el mismo procedimiento que cuando la vamos a montar después de haberla utilizado. El problema es que el sistema enrrollacable se estropea y no termina de desenrrollar convenientemente.
True! ;) On the other hand, car is quite easy to work with yourself and the parts are not expensive. You can also fit a lot of stuff inside. Good luck with making a decision. A lot to choose from :)
The morons dropping opinions without a clue. Should in fact learn about the advantages of the system and it's placement! Last but not least, how to use it. ;-)
@@crpth1 the morons acting all high and mighty and judging others for not being experts on the use of a particularly user unfriendly spare wheel design. Should not need to be an expert to use, should just be designed so that anybody can use it
Forgot to mention on the video! The lower part of the plastic box is in fact a "wheel chock". www.google.com/search?ei=i5ISX9rFFe6EwPAPrNyA2Ak&q=wheel+chock&oq=wheel+wedge+block&gs_lcp=CgZwc3ktYWIQARgAMgQIABBHMgQIABBHMgQIABBHMgQIABBHMgQIABBHMgQIABBHMgQIABBHMgQIABBHUABYAGDCigJoAHACeACAAQCIAQCSAQCYAQCqAQdnd3Mtd2l6&sclient=psy-ab Turn the box upside down and use the sloped part as a wheel chock, to lock the tire on the opposite corner, that you're replacing. So read your user manual, learn how to use the equipment beforehand. I'm 100% sure you'll not want to learn at night during a rain storm in the middle of nowhere..."How to change a tire" (safely). LOL 😂
Hi. I have a Peugeot 307 sw. I have a problem with this car repeated every winter. The problem is the oxygen sensor. Every winter and when the cold gets cold, the engine light is on in the car. When I search the computer scan machine. It tells me that an oxygene sensor is a problem that does not work. I have two oxygen sensor. And the two always hang. But in the summer and when the weather becomes hot. Engine light disappears. what should I do . Why the cinch hangs in the winter and the engine light works. Then in the summer the warm air disappears light engine. Please help me
unfortunately I've already bought a C4 Grand Picasso and was contemplating buying this kit for a spare wheel. Having seen this video I will be buying a wheel with a cover and leaving in the boot, much more convenient in the event of needing to change a wheel when in dress clothing and at the side of a road. what Clown devised this unit?
The Australian Ford Falcon cab Chassis utility had the same stupid design to get the spare wheel down, The previous owner had pulled the wheel up so tight that I had to cut the cable to release the wheel, then go and buy another mechanism to repair the the unit.
Can you show how you wedged it up to take the weight off it and how on earth you put the new one back in. Husband has given up and put it in the boot as he says it needs 2 people to get it back to it's position.
Hi Critchley999, Take a look at this video: th-cam.com/video/mFwIIy2meGc/w-d-xo.html The reason that it is problematic is most likely the WINCH. The winch gets old and the wire inside gets stuck more and more often. That is why you cannot unwind the whole wire operating the lever. With well functioning winch you should be able to lower down the spare wheel and drag it from under the car without the need of hooking it from the wire interface. When the tire is under the car it is difficult to remove the wire interface as you have seen on my video. With good winch you wouldn't need to do it under the car. Hope it helps Let me know if this got any clearer.
Thanks for your reply and the other video which we've watched too and apparently (according to Mr. C. as I know nothing about these things) it was the slide-off cover where the jack was that was old, warped and jammed and caused him to give up trying to get it back on. Luckily my son borrowed the car and needed the boot space so he put it back where it should go ..haha! It's not a great system though, I don't think x Am very grateful for your information x
I bought my 307 sw 3 months ago and yesterday watched this video, because I wanted to check my spare tyre to make sure its OK if something happens. The wheel was fine, I cleaned it a bit and today I tried to lift it back. But it looks like I haven't placed the wire end properly and while driving the spare wheel fell down along with the box. Glad no car crashed at it, I took it back, but while driving with 80 km/h you can imagine how awful it was, especially the sound. It even removed a bit my back bumper and broke a piece of it, but that's alright. I have put the wheel back with the help of a friend, just hoping it's okay this time. So a double check if everything's alright is always good. And this system definitely sucks.
Back breaker just to get a wheel out of car.... I'm sure the French done this engineering on purpose so when you're stressed out with a punchure on the hard shoulder with the British weather..
This is something very similar to my Citroen C4 Grand Picasso. Except, the system demonstrated here is actually a lot easier and straightforward! The most useless idea for a spare wheel placement system I have ever seen. I would hate to try and change the wheel in the rain on a dark main road. I had to use my user manual on a snowy night to figure out how to take the wheel out, and put it all back together again. The box that holds the jack is worse than useless.
Pourriez-vous s’il vous plaît me donner le nom de ce câble ou accessoires, le miens a cassé quand j’ai utilisé la roue de secours, et impossible de trouver ce Cable je ne connais pas le nom de cet accessoire
Got my spare wheel out fine but now trying to put it back on, iv been cranking anti clockwise for about 10 minutes and the wire is just not coming out????
Thanks. I have a 308 SW. This is the worst system I have ever seen. The winding mechanism for the cable on my car isn't very good, it barely winds up and down, almost as if it is slipping. May have to remove and dismantle to see if it can be fixed. The tyre should have been in a well inside the car. The rest of the car is fine, compares to other makes such as Ford, Renault and Vauxhall I have owned or had as company vehicles.
i bought a 307 with just over 95k km on dash,now it has just under 111k km,pretty awesome for a 2006 car,and i always wondered where is the spare wheel......now i know...😐
If you don't know something, it is never too late, to read the user manual, located in the glove box.This is definetely NOT the way, how you should take out the spare wheel in a 307SW. But at least you made a video about it. :)
Oly feck, why on earth will someone make this job so difficult, are they playing hide and seek. So difficult to check pressure and fill pressure. This is just crazy. Thank god I will never buy a pergeout. Lol
ALL wheels on a car are set outside exposed to the elements year after year... So what your saying is, that due to lazy attitude. You never touch them, so after a decade or so, of pure neglect there's rust on it... Yeah, right! LOL 😂
czlowieku nie kupie wiecej francuza co ty odpierdzielasz to jakas porazka ledwo sobie z tym radzisz a jestes w temacie omg.. co za auta co za rozwiazania a niech ich szlak ja mam xara picasso i nie wiem jak odkrecic to cos bo nie mam takiego klucza a moze tym sie nie kreci nie wiem juz nic
What the fuck, Peugeot....that s the dumbest design i have ever seen in my life. I am forced to cary the wheel in my back trunk for easy access....French
The 307 (I own one) is an easy car to work with, many things are user-friendly, but not the spare wheel for sure. I removed mine for inspection after watching this video, it looked alright, put it back, but it looks I haven't placed it back properly (the problem was with the cover of the car jack) and it fell down once on the road. It was loud! Then a friend helped me to place it back properly, but then I used it again for a flat tyre and it is still in my trunk now. Time to put it back again. Stupid design for sure.
But thank you for the explanation. Helpful :)
thank you much appreciated and I'm glad you had never done it before, makes it more realistic the experience I would have
I have a 307 SW aswell, that mechanism has a fault. The cable you see in the video is lowered and raised with the help of 2 gears, sometimes those gears will smash the cable into pieces and the wheel will be stuck (I had that problem). If you can hear and feel skipping of gears and grinding most probably the main cable is already stuck, if that is the case and your wheel is still in the highest position possible, the only way to remove the wheel will be by using pliers to cut the cable from underneath the back of the car. If that is not the case and everything went smoothly when you lower and remove the wheel make sure there is still some force pulling the cable down, otherwise it could go out of aligment and get smashed during raising of the wheel.
IMPORTANT: If you are going to lower the wheel and you plastic piece covering the bolt for the wrench is broken you will need to find a way to grab whatever is left and pull it up (you can use self screwing bolts) It's not appearant on the video but there is a 2-nd cable attached with that plastic piece and it is holding a hook (the thing attaching the cable to the plastic box), if you do not do this most probably the main cable will be smashed by the gears.
What a faf!
Imagine having to do this on a rainy/cold dark night beside a high road or middle of a hard terrain!
What about the less able people ie: ladies, older etc... ?
THUMBS ALL THE WAY DOWN for Peugeot.
Thanks for the demo though! You must have saved lives by doing this.
That's why when the system is properly used and in good working order. It's so much easier than most other systems!! Yep, surprising isn't it?!
Older people, ladies, etc. will have a big help from this system, IF they KNOW how to use it.
Point being. Knowing how to do it, you'll have to lift the tire just once! To set it on the hub and that's it! What about that for the old people, the ladies, etc. ;-)
Just because you watched on YT a poorly used and explained system. DO NOT skip using a proper manual... ;-)
The very slightly easier way to remove the wheel is to unhook the winch wire from the jack storage box. Once tension is off the wire it should be possible to push the "hook" hidden on the end of the wire in and off centre then just pull it out.
Also check the winch works annually and lubricate it. The first time I needed to use it it jammed completely part way down, All I had to do was cut the wire so I could remove the wheel and jack. It only took about an hour . Then I could change the punctured tyre and spend a couple of hundred on a replacement winch. Brilliant Puegeot engineering.
Yes, my winch was useless and broke too! Terrible design all round.
You can remove the wire without opening the box. Just release the wire until the wheel touches the ground, once the wire is no longer tensioned you can remove it with ease. Great car Peugeot 307 sw
Hi Miron,
Thanks for the comment!
I tried to lower down the wheel completely at the beginning. This is where the "5 minutes later" text appears. I turned the key in one direction and observed how the wheel releases (moves downwards) from the car. The problem is that when the wheel went about half way down it suddenly started moving up again without me changing the torque direction. My release mechanism is most probably rusty or simply old. I moved the wheel up and down couple of times before I reached the level shown in the video. Unfortunately I could not go lower then that.
It is a good thing you pointed that out and I believe that your comment will be useful for people watching.
Thanks again!
Hi mate! The winch is a common problem. The cable gets twisted up inside. It is very important for the cable to be tensioned when you are releasing it and when you lift as well, othervise the wire gets jammed like in your case. Normaly the cable is long enough not only to realease the whell to the ground but you should be able almost to pull it completely out (at my 307 is quite difficult because the towbar). Please carry on to be always oiled, this will slow down the cable grinding proces, it is a very squeamish mechanism, risky to service and a replacement is around £100. I'am looking forward to hearing good news from you.
Hi mate!
Just done the video we were talking about :)
Check it out if you have a spare moment. Topic: WINCH REPLACEMENT + what is inside.
LINK: th-cam.com/video/mFwIIy2meGc/w-d-xo.html
Cheers!
Very special way of hiding a spear wheel. The wheel will rust and it is smart to check it now and then and remove any attack of rust and repaint the spots. Or even better, get a used wheel in aluminium at a car demolishing station. May be it is smart to put it in a a solid plastic bag before putting it in place. just remember to put a couple of draining holes in the bag, in case humidity manages to enter it.
Great video my friend. Just the information I needed.
Thank you very much,
Jimmy the Mower
The release wire usually allows you to take tyre out the back of car so it makes it easier to release.
Great convenient design on getting out the spare wheel
bracala najjaci si! bro you are great, greetings from serbia
Great video as always - but the spare on the 307 is THE stupidest design in the history of cars.
C4 GP has the same crappy system installed. No obvious way to release it and can just imagine the fun trying to do this in the dark by the side of the road. I was lucky the tyre didn't deflate until I was home and was able to spend time indoors in a nice warm room trying to find out how to release the rotten thing. The old citroen system was a metal holder that was hinged - much better. Why in the name of sanity would they go backwards to such a rubbish system? Thanks for the video - it has been a life saver.
Thanks, i have had problems to reassembling the thing
La rueda se puede liberar fácilmente si desenrollamos totalmente el cable y toca el suelo. Es el mismo procedimiento que cuando la vamos a montar después de haberla utilizado. El problema es que el sistema enrrollacable se estropea y no termina de desenrrollar convenientemente.
Wow. Thinking about buying a 307 but that is honestly the dumbest placement of a spare tire that I've ever seen.
True! ;)
On the other hand, car is quite easy to work with yourself and the parts are not expensive. You can also fit a lot of stuff inside. Good luck with making a decision. A lot to choose from :)
The wire alows you to pull the wheel back he didnt turn it enough or it was broken
Opus Dei the morons who designed it should be given a special Nobel Prize ! !
The morons dropping opinions without a clue. Should in fact learn about the advantages of the system and it's placement! Last but not least, how to use it. ;-)
@@crpth1 the morons acting all high and mighty and judging others for not being experts on the use of a particularly user unfriendly spare wheel design. Should not need to be an expert to use, should just be designed so that anybody can use it
Excellent.very clear .Thank you
Forgot to mention on the video!
The lower part of the plastic box is in fact a "wheel chock".
www.google.com/search?ei=i5ISX9rFFe6EwPAPrNyA2Ak&q=wheel+chock&oq=wheel+wedge+block&gs_lcp=CgZwc3ktYWIQARgAMgQIABBHMgQIABBHMgQIABBHMgQIABBHMgQIABBHMgQIABBHMgQIABBHMgQIABBHUABYAGDCigJoAHACeACAAQCIAQCSAQCYAQCqAQdnd3Mtd2l6&sclient=psy-ab
Turn the box upside down and use the sloped part as a wheel chock, to lock the tire on the opposite corner, that you're replacing.
So read your user manual, learn how to use the equipment beforehand. I'm 100% sure you'll not want to learn at night during a rain storm in the middle of nowhere..."How to change a tire" (safely). LOL 😂
3:37 домкрат явно недоволен тем, что его эксгумировали 0_0
My winch is siezed with the wheel up - how do I lower the wheel to fit a new winch assembly?
Hi. I have a Peugeot 307 sw. I have a problem with this car repeated every winter. The problem is the oxygen sensor. Every winter and when the cold gets cold, the engine light is on in the car. When I search the computer scan machine. It tells me that an oxygene sensor is a problem that does not work. I have two oxygen sensor. And the two always hang. But in the summer and when the weather becomes hot. Engine light disappears. what should I do . Why the cinch hangs in the winter and the engine light works. Then in the summer the warm air disappears light engine. Please help me
I bought a jack and then watched your video))
Merci beaucoup tu nous a sauvé
do you know the part number of the box? thank you!
Polecam ! Najlepiej w czasie kiedy pada deszcz :)
W porze zimowej blisko 0 stopni Celsjusza - najgorszemu wrogowi nie polecam
I buy It Yesterday, he's more big than i expect Is from 2003 but i like It
unfortunately I've already bought a C4 Grand Picasso and was contemplating buying this kit for a spare wheel. Having seen this video I will be buying a wheel with a cover and leaving in the boot, much more convenient in the event of needing to change a wheel when in dress clothing and at the side of a road. what Clown devised this unit?
3jj
Thank you , i have thé same car ,i Taked taxi,when, i had this problèm
The Australian Ford Falcon cab Chassis utility had the same stupid design to get the spare wheel down, The previous owner had pulled the wheel up so tight that I had to cut the cable to release the wheel, then go and buy another mechanism to repair the the unit.
Scary to think the whole things held by one wire..imagine if it fails on a motorway..
Thank you so mucho
I keep the tire just in the back of car to avoid this operation!
Me too, this is the most difficult acces to a reserve tire i have ever seen, its so stupid and dangerous .
Can you show how you wedged it up to take the weight off it and how on earth you put the new one back in. Husband has given up and put it in the boot as he says it needs 2 people to get it back to it's position.
Hi Critchley999,
Take a look at this video: th-cam.com/video/mFwIIy2meGc/w-d-xo.html
The reason that it is problematic is most likely the WINCH. The winch gets old and the wire inside gets stuck more and more often. That is why you cannot unwind the whole wire operating the lever. With well functioning winch you should be able to lower down the spare wheel and drag it from under the car without the need of hooking it from the wire interface. When the tire is under the car it is difficult to remove the wire interface as you have seen on my video. With good winch you wouldn't need to do it under the car.
Hope it helps
Let me know if this got any clearer.
Thanks for your reply and the other video which we've watched too and apparently (according to Mr. C. as I know nothing about these things) it was the slide-off cover where the jack was that was old, warped and jammed and caused him to give up trying to get it back on. Luckily my son borrowed the car and needed the boot space so he put it back where it should go ..haha! It's not a great system though, I don't think x Am very grateful for your information x
Hi critchley999,
Great that you managed to put the wheel back in place. Thanks for kind words!
Best regards!
Hi critchley999,
Great that you managed to put the wheel back in place. Thanks for kind words!
Best regards!
Thank you
Thanks mate
Excellent review, read before I travelled and glad I did. Not an easy process...Best do it before you have to.👍😎
Thanks 👍🏻
Do you know where I can get a replacement box? The box holds the tyre to the winch? thanks
Hi,
Check e-bay. Look for "spare tire carrier / winch / lift"
Good luck!
I bought my 307 sw 3 months ago and yesterday watched this video, because I wanted to check my spare tyre to make sure its OK if something happens. The wheel was fine, I cleaned it a bit and today I tried to lift it back. But it looks like I haven't placed the wire end properly and while driving the spare wheel fell down along with the box. Glad no car crashed at it, I took it back, but while driving with 80 km/h you can imagine how awful it was, especially the sound. It even removed a bit my back bumper and broke a piece of it, but that's alright. I have put the wheel back with the help of a friend, just hoping it's okay this time. So a double check if everything's alright is always good. And this system definitely sucks.
Back breaker just to get a wheel out of car.... I'm sure the French done this engineering on purpose so when you're stressed out with a punchure on the hard shoulder with the British weather..
Thanks
This is something very similar to my Citroen C4 Grand Picasso. Except, the system demonstrated here is actually a lot easier and straightforward! The most useless idea for a spare wheel placement system I have ever seen. I would hate to try and change the wheel in the rain on a dark main road. I had to use my user manual on a snowy night to figure out how to take the wheel out, and put it all back together again. The box that holds the jack is worse than useless.
:) just the way it is (BTW I didn't know that it is even worse on C4 Picasso.... wow)
Pourriez-vous s’il vous plaît me donner le nom de ce câble ou accessoires, le miens a cassé quand j’ai utilisé la roue de secours, et impossible de trouver ce Cable je ne connais pas le nom de cet accessoire
Have a flat on Picasso and some tools are missing from kit. What to do now
whats the name of this thying
Got my spare wheel out fine but now trying to put it back on, iv been cranking anti clockwise for about 10 minutes and the wire is just not coming out????
I would make the designer team who planned this to change the wheel on the side of a highway in a cold rainy day. No better punishment.
3:10 i can't belive it 😂🤣
Thanks. I have a 308 SW. This is the worst system I have ever seen. The winding mechanism for the cable on my car isn't very good, it barely winds up and down, almost as if it is slipping. May have to remove and dismantle to see if it can be fixed. The tyre should have been in a well inside the car. The rest of the car is fine, compares to other makes such as Ford, Renault and Vauxhall I have owned or had as company vehicles.
mi llanta de repuesto no baja apresar que le doy cuentas para nos lado Po Steve que se a trabado
good video thanks
You're very welcome :)
What is the key size number?
Hi,
As far as I remember this is the same key that you use for the wheels - 17.
Cheers
imagine doing this in snow, -10C...they just could make trunk deeper, access it from the top...
i bought a 307 with just over 95k km on dash,now it has just under 111k km,pretty awesome for a 2006 car,and i always wondered where is the spare wheel......now i know...😐
This spare tire is bad man ...my tire blow up on winter...i was changing on snow aaaaaa it was very bad complicate ..
I know the pain... :)
y los techos de cristal son otra cagada k no sirve para nada por lo menos en sevilla con la calor k hace esta siempre con la cortinilla hechada
Unwind the cable all the way / A lot easier.
me gusta el coche pero el sistema de rueda de repuesto es una mierda, mejor el sistema de la xara picasso
If you don't know something, it is never too late, to read the user manual, located in the glove box.This is definetely NOT the way, how you should take out the spare wheel in a 307SW. But at least you made a video about it. :)
What a crap system. I hope it's not the same on a 308 sw...
It is unfortunately! It is on mine and the mechanism is fubarred, doesn't really want to unwind or wind up without assistance.
Wahnsinnige Konstruktion
Братан, обратно это колесо не поставить
whata stupid solution,
how is on 308 SW??
😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣easy job that like
Good work Peugeot try doing that on the side of a motorway 🤦🤣🤣
Tragedia aby wymienić kolo
Oly feck, why on earth will someone make this job so difficult, are they playing hide and seek. So difficult to check pressure and fill pressure. This is just crazy. Thank god I will never buy a pergeout. Lol
Not an easy system. I have a 307 and a 208 and the 208 is simpler
Are there really people who buy french cars?
yes,. people who don't like rust
One of the worst place to put the tyre, worst design
Thats gotta be the shittiest system ever
пиздец😢
What a stupid design alot of peugeots had this its stupid as over years the wheels gets rustu
ALL wheels on a car are set outside exposed to the elements year after year...
So what your saying is, that due to lazy attitude. You never touch them, so after a decade or so, of pure neglect there's rust on it... Yeah, right! LOL 😂
ههههه الله يسمح من روضة هذي عد متور هذا
that method id Terrible lol
czlowieku nie kupie wiecej francuza co ty odpierdzielasz to jakas porazka ledwo sobie z tym radzisz a jestes w temacie omg.. co za auta co za rozwiazania a niech ich szlak
ja mam xara picasso i nie wiem jak odkrecic to cos bo nie mam takiego klucza a moze tym sie nie kreci nie wiem juz nic
:))))) rozwaliles mnie na czesci :D
Stupid design for sure
What the fuck, Peugeot....that s the dumbest design i have ever seen in my life. I am forced to cary the wheel in my back trunk for easy access....French
Never and never buy a car like this! It is made by a dozen insane french engineers!
Man, do not make instructional video before you learn how to do things right...