@@thecandleman5129 I'll go into it on another video but, The sound proofing ain't what it should be, I'll need to add way more plasterboard to the outside of the room. Every day's a school day and all that
Hey Zambo, your electrical outlets should be fine per regs so long as they are fixed to something that is not demountable itself, outlet and light switch heights in new builds should be between 450-1200mm but since this is not a new build property you will have some freedom and leeway there, I would also check up on proscribed wiring zones regs just to make sure you are covered there and if in doubt get a registered sparky to give the room a once over before you get everything buttoned up. Aside from that its lookin good, nice to see the progress 👍
I used a roundover bit on the wood that had the circles in it. All the pallet wood was done using a random orbital sander.... F Gav, it's taken ages man
Great update. Youv made loadsa progress. Now a lot of what youv said in past videos starts to make sense. Keep going....almost there.
Thanks Neil.... I thought it was going to take 3 months mate.... Finishing jobs always take the most time
@zambotv8150 I did like your comment that you might be at it another year on the finishing 🙈🤣😲
@@thecandleman5129 I'll go into it on another video but, The sound proofing ain't what it should be, I'll need to add way more plasterboard to the outside of the room. Every day's a school day and all that
Hey Zambo, your electrical outlets should be fine per regs so long as they are fixed to something that is not demountable itself, outlet and light switch heights in new builds should be between 450-1200mm but since this is not a new build property you will have some freedom and leeway there, I would also check up on proscribed wiring zones regs just to make sure you are covered there and if in doubt get a registered sparky to give the room a once over before you get everything buttoned up.
Aside from that its lookin good, nice to see the progress 👍
Wow thanks.... Hopefully on the next one, we'll have some tunes to play you
Yas this is looking great ypu have done loads,
what router did you use to sort out the pallet wood, happy new year all the best for the 2025s
I used a roundover bit on the wood that had the circles in it. All the pallet wood was done using a random orbital sander.... F Gav, it's taken ages man