Makita EA5000p - unleashing the 50cc monster/with muffler mod will handle 80cm bar and .375 chain
ฝัง
- เผยแพร่เมื่อ 2 เม.ย. 2021
- Muffler mod on EA5000p with restrictive catalytic muffler
very hard wood
60cm TsuMura bar
RS .325 chain hand filed
Bel Ray H1R Racing 25ml
#EA5000p #Makita50ccMonster #MufflerMod - วิทยาศาสตร์และเทคโนโลยี
![[TH] 2024 PMWC x EWC Main Tournament Day 1 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/f5Coja1zCzo/mqdefault.jpg)
2:53 amazing monster power love
It is a great saw...
Best regards!
Bye the hand of a master go surprising! He's out of DPF🚀. WHAT THE G660. Mine has a transparent tank! Now I started doing a kart with 200cc and 6.5hp engine! I salute you!
Thanks for watching and best regards!
Mic unealta secreta, merge foarte bine pe mâna unui meseriaș, multa sănătate și spor la treaba weekend plăcut 🤝🤝🤝
Multumesc!
Sanatate si spor! 🤝🤝🤝
Love it! I just picked up a Dolmar 114 from the early 80’s and even though I love Husqvarna, every Dolmar/Makita I’ve ever owned is 10/10. The muffler was wide open from the factory apparently, and for a 51cc saw the thing *RIPS.* Feels so solid its like holding a small motorcycle, I only paid $100! I read that some guys tune them to 13,000! Great video - great saw!
Wise words!
I also want a Dolmar 115, it is awesome...
Thanks for watching and best regards!
I have a makita 520i and it was one of the best saws I've ever owned. Cant find parts for it anymore,at least around here. Great old saw though,I'd buy another in a heartbeat. Running a ms441c as a firewood saw right now,but I'm rebuilding a husqvarna 550xp because it's so much lighter than the big stihl.
@@ciphercode2298 eBay has saved my ass on obscure parts hunts, you’ll pay a bit of a premium, but I bet they have what you’re lookin’ for! I’ve heard the 550 is a beast.
@@CaliforniaCarpenter7 yeah,ive found most of what it needs on there. I keep watching to see if the brake band assembly can turn up. Gonna need a carb kit too. It's a tilitson,but I'll have to get it back out to see which model. Darn good saws,its worth fixin.
Jjj8888
Interesanta construcție are aceasta evacuare in interior ...cu catalizator restricționată din toate părțile ... modatul a dat o performanță destul de buna aproape 20 % . Un mod corect și reușit !!! Succes in toate 🤝🤝🤝
Da, si o tona de lucru cu ea 🤦♂️
Multumesc si toate cele bune! 🤝🤝
Awesome job on the saw! 🤩🤩
Thanks!
Used to have a Dolmar 5105. What a great saw! Sold it in a moment of poor judgement....
Love it!
Thanks for watching and best regards!
🤝🤝🤝
@@poparamiro mx
@@ildikobako4700 Thanks for watching!
Wonderful... Any word is extra...
Thanks and all the best! :)
That's a beast for 50cc...nice work on the muffler mod..👍🏻🤘🏻🪓
Thanks, best regards!
🤝🤝🤝
Glad to see you here Aaron ! Popas a good un too an luv to see him runnin the smooth Makitas , Cheers !
@@sundial6919 yeah..been subbed for a good while..he's got bad ass saws💪💪💪🤘🏻👍🏻🪓
@@Aaron_A_Lynch that he does an so do you man !
@@sundial6919 😁😁😊
Merge foarte bine cu tobă modată, exact aceiași tobă este pe Maruiama MCV5100s. Fain clip. Te salut și spor la treabă. 🤝🤝🤝
Nu are treaba cu 80cm 3/8..., ceva ce la altele e un fel de vis urat 🤣🤣
Salutare si spor! 🤝🤝🤝
Awesome saw!!
Yes, one of the most impressive .....
Thanks for watching!
@@poparamiro I look forward to your videos every day! I’m just starting to film and upload my own... editing isn’t very fun!
Freakin’ Awesome !!! 👍👍👍👍✌🏻😁
Thanks for watching and comment!
Super clip ,toba a fost foarte restrictivă și se observă diferența de câteva secunde după modificare. Felicitări 🤝
Multumesc!
Toate cele bune!
Diferență destul de mare după muffler mod. Spor și sănătate
Depinde de lemn, lant...
Dar da, e reusit operatiunea, dupa lupte mari si grele cu toba 🤦♂️😁💪
🤝🤝🤝
Another great video, I have to do this to my red Makita, Wish we could get the blue ones stateside. Is Belray h1r your preferred oil? Thanks again.
Thanks!
Yes, i prefer h1r
All the best! 🤝🤝🤝
0:02 amazing sound love
Thanks!
A good chainsaw as long as it works, but when it crashes, it crashes! I had the same for 3 years, but it is not durable! Thanks for the nice video!👋
Thanks for watching and comment!
🤝🤝1layk 1 klass👍👍🇺🇿
Thanks for watching and all the best!
🤝🤝🤝
Drujba minunată 🤣🤣 fain merge 😁 dar 261 e thebest 🤣🤣🐊 salutare 👍
Salutare!
Fara indoiala, la lemne de 15cm 🙄 iar in clasa hobby nu exista drujba mai buna ca 261 😁💪💣💣
Spor! 🤝🤝🤝
Cutting Wood👍👍
Thanks for watching!
🤝🤝🤝
Fain clip,Ramiro , te salut👍
Multumesc, salutare! 🤝🤝🤝
Good video
Thanks, best regards!
big like ✔️👍
Multumesc, numai bine!
Fain muffler mod ai facut. Restrictionata rau toba a fost. Epa shit! :D
Daca stiam dinainte cat e de lucru cred ca o dadeam pe un 261 😁
🤝🤝🤝
@@poparamiro Tu sa dai o drujba? Nici pe bani no dai. :))
@@EugenTechTips =))), desi m-a terminat asta....
@@poparamiro 🤔🤐🙄
Micul gigant a ramas fara DPF 😁.
Intr-adevar in lemn mare se vede diferenta de cuplu. 👏👏👏
Da, si eu fara nervi de la asa toba 💣😁
🤝🤝🤝
About a 15% improvement in cut speed, definitely worth doing. Is that really a 30+ inch bar on a 50cc saw? It doesn't look quite that long, maybe it's gross length, not net. At any rate, that's still a very impressive cut from a 50cc saw. We run 57cc Homelites with 20 inch bars and our longer bar saws, 24 inches and up, are typically 77cc saws. That blue saw would probably be an upgrade for us.
Yes, good gains, 24" bar...
Thanks for watching and all the best!
🤝🤝🤝
Dle Ramiro! Ce să ne cumpărăm pe viitor la 50 cc? Makita Ea 5000p - Husqy 550 Mark ll - Stihl Ms 261 -Solo - 656 - Efco 156 - Maruyama MCV 5100 - Shindawa etc. - Echo. Cine e Rgină la 50-55 cc?
Cred ca un Dolmar 115 sau un Solo 651 sunt cele mai bune. 5000p e si ea de luat in calcul....
MS261 merge bine doar transformata in clasica, deci no go for me....
550mark II o scula solida si foarte buna, cu cateva lipsuri...
Spor!
Sunt curios cu același lanț și șină cum trage un ms 261 cu muffler mod. Sa fie chiar asa mare diferență? Nu vad dc ar avea Dolkita asta asa cuplu mare, are acelasi piston stroke length. Hmm
Daca imi ajunge pe mana 261, le pun pe 80cm 3/8 full comp pe amandoua... Do or die 🤣
Very good saw! Last good edition...
What max rpm You set after MM?
Thanks!
About 13500...
Which Tsumura bar fits the EA5000?
With Husqvarna K095 mount...
I have the previous version DCS500 (first chainsaw at the time stupid purchase) 3.2hp instead of the 3.9hp for this one. Its an absolute pig. FWIW I did a cut yesterday on a similar sized super hard dry gum as your first cut ( semi chisel not super fresh) and it was 93 secs. I then did it with my G660 23 secs lol.
Stock for sure are pigs 😁
Thanks for watching and best regards!
🤝🤝
And how did you hold it back together with the nuts missing?
All nuts are on place...
Thanks for watching and comment!
So did you solder it back together with lead solder?
Silver alloy...
Salut! Tobă "ou kinder" 😎
Chiar ca da 🙄🤣🤣🤣
🤝🤝🤝
Hi. What country and how much wood you cut? Battery saw or gas a cord or less a year and occasional storm cleanup wood diameter 16 inches or less. Your thoughts?
Hi,
Romania, i don't cut very much wood...
Gas, for sure, battery as backup...
Thanks for watching and best regards!
🤝🤝🤝
@@poparamiro thank you. How are the makitas and husqvarna 50cc class saws pro saws on longevity. How are the new auto tune saws. I use non ethanol canned fuel and husqvarna bar lube.
@@joshr2128 They are pro saws, good longevity...both new versions of mtronic and autotune are ok
@@poparamiro thank you. Do I need to worry about dealer support on them for software updates etc. Or is makita or echo better all around?
@@poparamiro maybe a holzforma saw? I don't have a lot of money to spend. 400 or less.
👍👍👍👍
🤝🤝🤝
👍
🤝🤝🤝
It's a shame Makita is discontinuing them.
Yes, very bad...
Thanks for watching and all the best!
🤝🤝🤝
eu nu vad nici un dpf, vad un catalizator....
Era o gluma 🤣
🤝🤝🤝
@@poparamiro vezi că vă crede ala mic cu drujba lui albastră 😂
@@uAeeb ala mic si rau... 💪💪🤣🤣
@@poparamiro dah =))
minha vida é viver na estrada
Mauricio & Mauri
Composição: Ivone Ribeiro / Joel Marques
no dorso do asfalto dentro do meu caminhão
sou caminhoneiro eu sou peão
a minha vida é livre feito um pássaro no ar
eu não tenho pressa de chegar
o laço da saudade não me prende o coração
a cada dia eu vivo uma paixão
eu solto na banguela deixo a vida me levar
amando sem querer me apaixonar
minha vida é viver na estrada
em meu caminho brilha o sol da emoção
o meu coração é fera que nunca foi domada
no rodeio de uma paixão
minha vida é viver na estrada
em meu caminho brilha o sol da emoção
o meu coração é fera que nunca foi domada
no rodeio de uma paixão
nas curvas do caminho vou deixando a solidão
no rádio toca sempre uma canção
de dentro da cabine sou pedaço do motor
piso fundo com cuidado no acelerador
no rastro dos pneus deixo o passado para trás
e a cada dia eu vivo um pouco mais
domando o meu destino com a fibra de um peão
nas rédeas firmes do meu caminhão
minha vida é viver na estrada
em meu caminho brilha o sol da emoção
o meu coração é fera que nunca foi domada
no rodeio de uma paixão
minha vida é viver na estrada
em meu caminho brilha o sol da emoção
o meu coração é fera que nunca foi domada
no rodeio de uma paixão
Best regards!