You guys are AWESOME ! Watched that Volvo pickup series and I laughed my ass off with your explanations on this episode, made me sub ! Keep up the great work ! And thanks !
When I told you to have fun maybe I should have mentioned opening the garage door while using the body filler. Music is a lot better. Looking good, mostly. Kudos 🤪🥴
Harbor freight - yeah, really weird. They are full of *surprises*. Rockers look great. Did tons of body work with my brothers in teen years. You guys remind me it goes better with others. Don't forget to undercoat against the stupid rust before you seal it off.
Thanks. Yeah the rockers are not the easiest to replace. We had to cut them out near the top and drill out the spot welds near the bottom. After the spot welds are drilled out you gotta go in there and chisel off the rest of the metal from the rockers. It takes some time. We definitely plan to do our best to prevent rust in the future.
Yeah we hit quite a roadblock looking for another hatch to use for the tailgate. We finally found one and have resumed work on it within the last two weeks. We have about two weekends worth of work to finish before we have enough footage to make the next video. We will post that, then the last video will be paint and re-assembly. Thanks for staying with us and wanting to see the project through.
Found this build yesterday, really enjoying this. At 13:30, there is a green fuel cap, is this a diesel volvo? Haven't heard ya'll talk about the engine yet...
We want to keep it for a while and don't have plans to sell it. We want to do an engine swap in it sometime and we have a few other mods that we want to do over time. I'm sure if someone offered us $10k or an absurd amount of money like that we would sell it though.
i’m about to have my driver side rocker replaced on my 245. I have that exact replacement rocker panel you have in the video. I thought it was a direct fitment. local welder told me $150 labor for mig welding it up
As you can see in the video, the replacement panel is a little bit larger than what we needed. As an added complication, we are welding the rear doors shut, so some trimming was required. You are going to have to do some cutting on the car and some cutting on the replacement rocker no matter what, so I would recommend our approach. You'll want to drill the spot welds out at the bottom of the rocker and then chisel off the bottom section as we did. Then you'll want to cut far from the rust on the top in an area that won't be too terrible to weld. $150 isn't a terrible price for welding it in if you don't have a welder. The welding isn't the hard part, it's everythign else you gotta do before that step. We are not professionals but this method worked well for us.
Nice. Yeah it's astonishing how much junk gets stuck in there. Gotta clean it out good before welding or you could end up with a small campfire in your car.
Never seen filler applied with a putty knife... The plastic manufacturer must love you guys. Keep it going, love watching the progress!!
Haha yeah we didn't have any applicators and didn't feel like going to get any at first. Pretty lazy way to do it but oh well.
This is my second time rewatching this series, can’t wait till you guys come back and give more updates, keep up the hard work guys!
New video is filmed and being edited right now!
Fellow Volvo lover. I think it's awesome what you guys are doing! Keep up the awesome work!
You two keep it up doing a good job it's starting to look like it came that way.
Love watchin the volvo build.
I subscribed, cant wait for more projects
Hey guys! I'm your latest subscriber. The Volvo videos are great. I have a 91 240 I'm getting ready to do some work on. Keep up the awesome videos!
Sweet dude. Thanks. Volvo life.
You guys are AWESOME ! Watched that Volvo pickup series and I laughed my ass off with your explanations on this episode, made me sub ! Keep up the great work ! And thanks !
As a new to me 245 owner, subscribed.
When I told you to have fun maybe I should have mentioned opening the garage door while using the body filler. Music is a lot better. Looking good, mostly. Kudos
🤪🥴
Coming along nicely, looking forward to seeing it done. ;)
Keep us posted! Just subscribed.
New subscriber to your channel. ... can't wait for the finished product. Keep up the great videos my friends greetings to you from Mexico.
I like your channel guys, keep up the truck videos !
nice jobs...i very like that your video..
Can't wait for the next episode!
Harbor freight - yeah, really weird. They are full of *surprises*. Rockers look great. Did tons of body work with my brothers in teen years. You guys remind me it goes better with others. Don't forget to undercoat against the stupid rust before you seal it off.
Thanks. Yeah the rockers are not the easiest to replace. We had to cut them out near the top and drill out the spot welds near the bottom. After the spot welds are drilled out you gotta go in there and chisel off the rest of the metal from the rockers. It takes some time. We definitely plan to do our best to prevent rust in the future.
when are you going to put out some more content, I really enjoy you channel
You guys are hillarius....too much filler fumes eh Jake.....love that smell too 🤣 New sub from 🇨🇦(the other 🇸🇪 😁)
Please come back. It has bin 9 months since last time
We will have the final fabrication video up later this month. Thanks for wanting to see it done. We want to get it done too.
I've been waiting for a new update on this forever...
Yeah we hit quite a roadblock looking for another hatch to use for the tailgate. We finally found one and have resumed work on it within the last two weeks. We have about two weekends worth of work to finish before we have enough footage to make the next video. We will post that, then the last video will be paint and re-assembly. Thanks for staying with us and wanting to see the project through.
Hope all is well, looking forward to an update.
Coming up this month.
Waiting for the finish..
Just how high did you guys get for this video? Awesome! I love it! Keep it up
Found this build yesterday, really enjoying this. At 13:30, there is a green fuel cap, is this a diesel volvo? Haven't heard ya'll talk about the engine yet...
It's a regular B230 gas. A lot of 240/740/940 cars around here have green fuel caps even though they aren't diesels though.
ive never welded a vehicle is there a reason you cant run a full pass or long bead? is the metal too thin does it blow out?
Luv it!!!!
Any updates on this project?
The Vulva
Прикольный проект! Парни в какой цвет будите красить?
благодаря! ярко-голубой
how much would you sell the finished product for a year down the line?
We want to keep it for a while and don't have plans to sell it. We want to do an engine swap in it sometime and we have a few other mods that we want to do over time. I'm sure if someone offered us $10k or an absurd amount of money like that we would sell it though.
i’m about to have my driver side rocker replaced on my 245. I have that exact replacement rocker panel you have in the video. I thought it was a direct fitment. local welder told me $150 labor for mig welding it up
As you can see in the video, the replacement panel is a little bit larger than what we needed. As an added complication, we are welding the rear doors shut, so some trimming was required.
You are going to have to do some cutting on the car and some cutting on the replacement rocker no matter what, so I would recommend our approach. You'll want to drill the spot welds out at the bottom of the rocker and then chisel off the bottom section as we did. Then you'll want to cut far from the rust on the top in an area that won't be too terrible to weld.
$150 isn't a terrible price for welding it in if you don't have a welder. The welding isn't the hard part, it's everythign else you gotta do before that step.
We are not professionals but this method worked well for us.
got the rocker on no problem. It was crazy how many leaves and debris there was stuck behind the rocker
Nice. Yeah it's astonishing how much junk gets stuck in there. Gotta clean it out good before welding or you could end up with a small campfire in your car.
Update?? 😀
Coming up this month. Hit a roadblock but we are back at it.
Yo whats going on with this build
Update coming this month
Hilarious