Omnet++ Quick Understanding: Theory and Simulation of the Hello World on Windows
ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2024
- This video provides you with a quick overview of Omnet++, and walk you through the Setup and simulation of the omnet++ "hello world program, also call tic-toc simulation.
It will show you how to create your first simulation Project in OMNeT++ on Windows
Thank you The Pirates, Shahnawaz, and all other people, for your rewarding comments. These are the type of messages that fills somebody up, fuel him and give him necessary strength to go and produce more... To be honest, I had to edit end reedit this video for more than 5 hours, to make sure that I myself can find this tutorial helpful in the case tomorrow I myself forget the steps hahaha.
You might not know, but I myself that was the first time I was using this software, and since I spent many days to "understand" it [I still do not understand :)], I decided to make life easier for other people that are coming behind me...
This is my life philosophy. "Don't let people come and struggle where you already passed, clean the way for others". So brothers and sisters, if you notice that I do not answer your request about some error you are having replicating this video, it is because I am not dedicated to this software, but if I can help you in anyway, I will. Your comments seriously motivate me and push me to go and dig more 😂
Thank you all
Thank you so much for your useful videos , wish to see more on the Omnet and networks simulations
Thank you very much Tchamna, your tutorial is very good and easy to follow. It helped a lot. Cheers from Brazil!
i don't know how to thank you, it was so good and i could easily understand everything you demonstrated, Well Done.
Thanks for your feedback
Explaination was easy to understand and precise!!!
Need more tutorial on OMNeT++!!!
Thank you vey much for your patient to made this video, it was the best tutorial i had ever seen before! The simple and detail explanation shown the high teaching skill and knowledge in telecom and the tools. This is the model tutorial for all beginners. I looked forward to see your next video very soon.
Thanks a million for your comment. This motivates a lot. You are a grateful person who knows how to appreciate and give back. Thank you for your positive energy. As you said, it takes time, patience and effort to produce such tutorials. But as disclaimer, I am not in the telecom area 😂. I was just helping a student with his master thesis subject and had to read understand before explaining. After the hard time I went through, I said to myself that other people will not go through the same efforts I went through ☺. Thanks a lot for confirming my teaching skills.
Tchamna
Thank you buddy.. It was great.. hope you make more of them and sooner..
The explaination was so good. Are there other videos you did or recommend to learn something more on Omnet?
You're good bro, thank you for breaking it down. All your videos are superb. SUMO video great as well.
Glad to help, Merci de vous avoir aidé
Thank you so much. It was really very helpful and easy to understand.
Thanks for your video tutorial. The way you explain, it's amazing. i request you to please add a tutorial of sending message between more than 2 nodes.
Thank you
Many Many thanks, Your vedio helped my with my assignment
Your explanation is so good
All the best for you and Thanks alot
"Don't let people come and struggle where you already passed, clean the way for others".
Simple, Clear, and Precise.
Thank you very much.
Thank you, it was very well explained
Thanks a lot sir...Please release more tutorials on OMNnet++.
This video is quite educative and a masterpiece!!!
Great video. Easy to understand. Can you provide a tuto for wireless sensor network simulator ?
thanks a lot, this is exactly what i needed
simply explained.. thanks .
It was really helpful
Thanks a lot
excellent explanation
Thank you so much man 👍
Thank you so much sir.
Thank you so much.
thank you so much . it is very useful, compiled with no error. can you plz advice me for links containing tutorials for IoT on omnet++ ? I can't find .... thank you again
Thank you
thank you
Can you give me the link of your third video which is about SUMO and OMNET++ combination? Thank you so much.
Thank you sir for this .I have been trying to create 5 nodes that are communicating. A message sent by
a node 0 can be only received by node 1. Node1 will forward the received message
to node 2. Node 2 will forward the message to node 3. Node 3 will be forwarding
the message to node 4. Node 4 will generate a reply message and send it to node 3. But ive been unable to get this done following this
Plz continue the series with Veins package
Thanks for an elaborate video but I am facing problem of not been able to generate c++ script file whn attempting to generate source file. Plz assist me to resolve it.
share the video about DoS attack in wireless network
Thank You, It is too descriptive and step by step
thx
i add define module as well as computer2 is C bt the error is same my node nt found
Sir, I'm getting an error message "unknown log format character '
Hello.Please can you help me,where can I modified in INET to create our algorithm.Thank you so much.
Thanks sir it was nice vedio but sir when i install omnet++ sir at the end of installation it gives one option of" make " command but when i press make command so the error comes that "such a library is not found".
Please help me everyone.
how can we communication between 20 nodes?
How to get OMNET tool is it open source? as a beginnner to this tool how could i learn programming and simulation of sensor nodes help me ASAP
good information
Hello,
How we can model queueung networks please ?
Does it have ESP32 and raspberry pi? Please reply
Hello, I am new in Omnett world. So I am facing some error messages so can I find some one who check this errors with me? (it is a paid help)
i get this error.
Exception occurred executing command line.
Cannot run program "C:/Users/Ultron/Downloads/omnetpp-5.6.2/samples/Omnet_Hello_World/Hello_World/src/Hello_World.exe" (in directory "C:\Users\Ultron\Downloads\omnetpp-5.6.2\samples\Omnet_Hello_World\Hello_World\src"): CreateProcess error=2, The system cannot find the file specified
basically the .exe file doesnt get created and i donnt know why
i have no idea how it worked for people in the comment
Is this problem solved . If yes i am also facing same issues help me
@@abhi_updates nope dude sorry. i gave up on it. i was only trying it on my free time.
Great video... But, i have a problem: When i am going to run the project, i found this error:
"Simulating src" has encountered a problem
exception ocurred executing command line.
Anybode tell me about the reason of this error? help me, please
same errir pls guide
The error is in the file.ned. the simple module must go out the Network.
@@alejandroroseromedina8598 dnt understand
@@tubarehab you must create the project file in the omnetpp/samples folder
cause the config file is present only in that folder
@@vishwan7280 hey i am also facing same problem bt i have done it within the sample still same error coming. Mine is omnet 4.6 version. Pls help
hey sir! can you help me in implementing my idea
u make a good video , but why u are so slowly?
I cannot run my program an error is occurred please help me
protocole Receiver Intiated-mac??? code
Please, could someone help me better navigate node-TSN pre-definitions in INET ? I'd like to use the TsnDevice offered by INET in my network architecture. According to the NED file of the TsnDevice module, the hosted applications are of type 'lApp,' and only the NED file is found in the inet.applications.contract directory. Willing to add some operations to the handleMessage of packets in lApp, I generated an lApp.cc and lApp.h in the inet.applications.contract directory. However, during simulation, I observe that these new files are not being considered.
Could you please assist me? Thanks in advance
Plz continue the series with Veins package