Could you please give me the properties of this endomotor kindly , I want to know everything about the programs and the file system , does it accept protaper or not , and all other properties, thanks 🙏🏼
@@Woodpecker-Dental Hello. You should answer this question! When I insert the file do I have to push the button or not? Because in the video it doesn't crush it and in the manual we wrote that I have to! Give me your correct answer. Thanks
@@Vigorclinics Hello Dr. Igor, thank you so much for your question and feedback. For loading the file, some doctors are accustomed to push the button while inserting the file, and the others do not press. Both way is ok. But it is not recommended to push the button while inserting the file. Sorry to result in this confusion, we will check the Manual and correct it. Thank you again Dr. Igor.
2.5 Installation and removal of file 2.5.1 Installation of file Before starting the device, plug the file into the hole of contra angle head. Hold down the push button on the contra angle and insert the file. Turn the file back and forth until it is lined up with interior latch groove and slips into place. Release the but-ton to lock the file into the contra angle. Warnings: After plugging the file into contra angle, let go the hand on push cover to assure that the file cannot be taken out. Be careful when inserting files to avoid injury to fingers. Inserting and removing files without holding the push button may damage the chuck of contra angle. Please use files with shanks meet the ISO standard. (ISO standard: Ø2.334 - 2.350 mm) 2.5.2 Removal of file Pressing the push cover, and then directly pull out the file. Warnings: Before plugging and pulling out the file, the motor handpiece must be stopped. Be careful when removing files to avoid injury to fingers. Removing files without holding the push button will damage the chuck of contra angle.
How many programs does this motor have ?
Hello Muhanad, there are six operation modes of Motor Pex: EAL Mode, CW Mode, CCW Mode, REC Mode and ATR Mode. 😀
Could you please give me the properties of this endomotor kindly , I want to know everything about the programs and the file system , does it accept protaper or not , and all other properties, thanks 🙏🏼
Hello dear, could you please give your contact information that I will send you the instruction?
@@Woodpecker-Dental please give me your contact details what's app
@@mashaallahalhamdulillah4069 Hello, kindly wonder where are you so that we can give you the contact information of local distributor? Thanks.😀
At 3'56 minute insert the file without pressing the button, which reading in the maintenance book is wrong!
photos.app.goo.gl/KTNDpCDg2Sztx8Us8
Hello dear dr, kindly want to know you mean that is a mistake in the maintenance manual or in the video?
@@Woodpecker-Dental
Hello. You should answer this question! When I insert the file do I have to push the button or not? Because in the video it doesn't crush it and in the manual we wrote that I have to! Give me your correct answer. Thanks
@@Vigorclinics Hello Dr. Igor, thank you so much for your question and feedback. For loading the file, some doctors are accustomed to push the button while inserting the file, and the others do not press. Both way is ok. But it is not recommended to push the button while inserting the file. Sorry to result in this confusion, we will check the Manual and correct it. Thank you again Dr. Igor.
2.5 Installation and removal of file
2.5.1 Installation of file
Before starting the device, plug the file into the hole of contra angle
head.
Hold down the push button on the contra angle and insert the file.
Turn the file back and forth until it is lined up with interior latch groove
and slips into place. Release the but-ton to lock the file into the contra
angle.
Warnings:
After plugging the file into contra angle, let go the hand on push
cover to assure that the file cannot be taken out.
Be careful when inserting files to avoid injury to fingers.
Inserting and removing files without holding the push button may
damage the chuck of contra angle.
Please use files with shanks meet the ISO standard. (ISO standard:
Ø2.334 - 2.350 mm)
2.5.2 Removal of file
Pressing the push cover, and then directly pull out the file.
Warnings:
Before plugging and pulling out the file, the motor handpiece must be
stopped.
Be careful when removing files to avoid injury to fingers.
Removing files without holding the push button will damage the
chuck of contra angle.