I was the layout guy for 35 years on everything you can think of. A tip i will give to anyone watching, layout all windows , doors, intersecting walls and so on before laying out the studs. The reason is stud layout might layout in or on the above mentioned areas, and then you will need to esarse a lot of stud layout marks. It gets very confusing. Also do not layout anything until you know (for sure)where all Plumbing, HVAC, Electrical Panels, Windows Doors, Fireplaces, Shear Walls, and so on. You want to build once, not cut in later. It takes years to get good. Good means your build your work once! You tell the other subcontractors i need this info now, if not i will charge you later if i have to change anything.
100% agree! I’m new to framing (mostly commercial/metal). I’ve laid out stud marking before door opening, which led to confusion and re-markings, etc. 🤦🏻♂️. Now, I lay out all window and door openings first and then fill in studs and cripples as needed. Very good wisdom, sir.
Also consult the blueprint, most mechanical placement should be on there, if a framing member lands there though ideally you want everything stacked occasionally one has to move a stud or cripple over to compensate. This can be done preemptively, if the mechanical contractor misplaced their 'whatever' then back charge is warranted but if the framers consider the subs to follow it can all be made right without having to tear things out later. Saving everyone time on the job. I've often noted the jobs where every contractor is mindful of the other elements, and the work flow to follow were the best ones for contractors and customers the care and quality of work shows in all of it. Whether someone is production oriented or quality oriented.
@@roz4747 I think what he's saying is, lay those out also, in addition to the regular studs. I could be wrong, but I stayed at a Holiday Inn last night 👍
General contractor.... taught by an old school true carpenter. Man, how I love your patience. I try to hire young kids (18-22) to teach them what I was taught. Gonna have to save this video for are morning meetings!!! Awesome detail!
Diezzel 1997 hey man, there’s good ones out there still. I’ve been framing since I got out of high school. Walked onto a crew knowing nothing sweeping floors and now I can walk into any framing job with confidence that I can get shit done. Taking pride in my trade and hard work. 21 years old now. Still lots to do and lots to learn and I can’t wait.
There are still folks who want to learn. I tried finding a construction job when I was younger. Everyone was only wanting to hire union guys then I just became an engineer instead. Engineering can be boring as hell sometimes, to he honest with ya. Now I'm helping folks out when they're stuck with problems and get to do some construction sometimes. I helped my parents with their house. It's like life makes a big circle sometimes
Sometimes older applicants can be a better hire than a young person. I didn't get into finish carpentry/construction until I was 36. After years of dead end, BS jobs it was time for me to get serious about learning skills to make a decent living. I was highly motivated and had organizational skills that helped during my apprenticeship. Don't discount older apprentices, many have lots to offer and are highly motivated.
HELLO FROM CROATIA You probabby wont see this comment But, I can't thank you enough! This is my first video ive watched on your channel, a long time a go, and till this day, i watch ever, video. Ive learned so much that ive build my self 6m by 6x small house in the woods ... THANK YOU SO MUCH!
Teaching a carpentry pre-apprentice program on the James Bay coast. Thank you for making these videos, as they are helping the students to visualize the what, how, and why of framing. Cheers!
Learned this at Los Angeles Trade Tech Residential Construction. I love your presentation which is easy to comprehend and understand. The basics of building a house should be mandatory to graduate high school
Its not often you find guys that know the whole building process (And can do it) from top to bottom. Like you guys I can do every one of the trades if i need to fill in for a missing sub..saved me a few times! Love your videos because it helps the up and coming generation see this is a valid way to make a living. I dont know what id do if i couldn't be outside in the fresh air moving around...even at 55 yrs old still going.
I enjoy watching another carpenter that actually knows what he is doing am learning its making me miss my work less stressful. I was born and raised in the business had fifty five employees and that few years was a nightmare hiring good people. Now that I am dying I've also learned what a blessing it was to have had so many apprentices over the years and most of them have become successful in their fields. You guys are great keep up the good work. One word of advice don't ever take your safety for granted made that mistake fell three stories at 33 years old it took a severe toll on my body while yes I survived I broken a couple dozen bones both in my back , neck seven ribs and several other internal injuries I worked 18 more years after recovering but it was not even close to the same personal safety is the utmost respect for you and your crew. Enjoying the videos.
You guys must recognize the tremendous gift that your pop gave you, along with the torture that came with being the grunt labor. Architect degree from Georgia Tech is no walk in the park, so we know he is a very sharp (smart) man who surely worked VERY hard in school and beyond. Cheers to you pop.
As a plumber (and steam fitter) I have often asked some of the Carpenters what they were doing in marking off the floor before putting up walls. And to see them have to rip it all out when the Architect / or (Engineer)came by to check it out. I see now why they never answered my question with a straight answer. They always said next year in your Trigonometry class you will learn. I was 12 years old and I only went to school half days and worked the other half days. My grandfather owned the plumbing company and my father and uncles and I was required work. I am now 74 years old. I have made a barn it wasn’t half bad, using the techniques I saw one carpenter used. I make furniture too. I found that wood working is relaxing 😎!:)
You guys are a pleasure to watch, very informative, easy to understand, coming from a old retired carpenter/ gen contractor. There are many instructional videos on TH-cam, but all are not correct, yours are ,excellent job. Good to know there are craftsmen that still take pride in their work, build every project like it was your own property.
@@PerkinsBuilderBrothers thank you for posting this video. I’m hoping to get into Framing for a living, and this helped me a lot! One training video I saw was saying to mark 16” then add an 1 1/4” from the Center and Mark that. Is that just because you can do it ether way? Or would the guy have just mis spoke? I wrote down both what he said and what you said in my notes app on my phone but, if the other video was a mistake, I’ll delete that layout. I just thought I should have it written down for reference since I feel like I’m learning from scratch.
@@AaronWanamaker91 As long as you’re consistent in your layout is correct adding the three-quarter inch or subtracting this 3/4 inch for layout doesn’t matter. Just be consistent. Also remember this is an over simplified video there are several more steps to do this 10 times faster that they are not showing you in this video. Read Larry Haun’s framing books, and watch his video series. He’s the grandfather of modern framing. Enjoy your journey.
I would expect nothing else from the greatest state champion that Swain county has ever seen! Seriously, this was extremely helpful not only to me but I’m sure to everybody watching!
I've learned more in this video then I've ever learned in the real world in these 9 min thank you so much I understand it so much better now and it gives me the motivation and push I needed to start a shed building thank you so much.
One of the most informative, straight-to-the-point and helpful explanations on the subject! Well organized outline and presentation, effectively edited making it easy to focus and grasp the steady flow of content! Thank you for taking the time to create and share your knowledge - it's definitely appreciated and has helped me tremendously!
Thanks for the video! I'm learning a lot. Back on 2008 I was in Brooklyn New York, I work with a framer name Roberto fini, an Italian guy, I've never seen someone working like that guy. Fastest rough carpenter, I couldn't learn much, because of the speed, in hours we were using pallets and pallets of 2x's 6x's 8x's and 12x's amazing. First day, when I showed up to work, I calculated work for a week, by 4pm same day everything was done.
Great video. I’m a remodel contractor and don’t frame much so I need a refresher on framing depending on how long it was from the last wall I thru up. I’d watched a few videos before I came across yours. This is by far the best edited and explained video I’ve ever watched. Thanks for putting quality content out there.
Awesome video! I’m getting ready to build/sell my first home. I’ve been doing carpentry work for many years, most of it on my own remodels and a few years finish work, but I’m not a “carpenter”. I really appreciate you explaining things on my level. I was blown away that I never noticed the 19.2 marks on my tape measure! Thanks!
Everyone misses one VERY important lesson that I learned the hard way. I've watched hundreds of framing videos on TH-cam and nobody talks about laying out butt walls, they only talk about layout for through walls. To layout a "butt" wall 16" oc, you CAN NOT just lay out your "correct length" wall 16" oc like you would normally lay out a through wall because your sheet goods have to not only cover the butt wall but they also have to cover the end studs of the through walls. If you don't subtract the through wall's thickness and you just lay out the butt wall like you did the through wall, your sheet goods WILL NOT break on your studs at all, the will be off by 4" or 6" (don't forget to account for the thickness of your sheathing of your through wall, hence 4" or 6" vs. 3.5" or 5.5"). Hopefully this helps someone avoid the pitfall I fell into.
Great video! I have been in construction 35yrs now. Stumbled on your video somehow. Love it. I am going to have new guys that aren't getting me watch you. Without ever working with you by the way you are you have a lot of knowledge. Way to go brotha.
I understood store it before I watched this but now I know exactly why it's done from a way more simple example. The way I was taught it was confusing until I figured it out on my own. Thank you and the way you explain it is very simple I'm sure this video helped allot of people it. 🙏🙏
I'm returning to framing after a few years and I don't want to start over as the green guy. You're saving my life with these videos and yes they're all oh yeah!! 😅❤😂❤😂
Fascinating, intriguing and amusing…in UK this is a garden shed, because we build brick dwellings which is a whole different ball game. Of course we do have stud partition walls and wooden joists, along with solid brick internal supporting walls, but nothing like this sheer quantity of wood. Thanks for sharing…
Very good, I like this young man. Jack studs can also be referred to as trimmers, and when laying out I like to lay out from left to right, That way your tape measure numbers are always right side up, rather then upside down..To do this one has to do a cross over at your wrist, pulling the tape with the left hand and penciling with the right hand, unless your left handed, (like my brother) You can also buy tape measures with inverted numbers. Keep up the good work Perkins..
I I thought I knew everything. I once was told if you don't learn something everyday then it's not a good day. Thanks for sharing. I pray your doing well.
Thanks for the video, very informative and for someone like me who is fairly new to framing this is the wisdom that makes you go from good to great, awesome.
"Only an electrician"??!!?? 😳 That's huge!! I know you didn't mean it like that lol ... I couldn't help giving you props for having such an excellent (but scary) trade.🙂👍
Thanks very helpful I'm a begginer your video help s alot I'm a begginer contractor trying to make a good life thanks alot again very helpful learned a lot from u 🔥🔥💯💯🚒🚒
Such a great video and pretty simple to process. For me the big thing is : how to start or end your beginning corners ....and from that point, how you then measure your studs from there on over, if that makes sense . - Ken in Hawaii
I watched a video about framing language and what things are called so it was really nice to have a bit of a quiz on what things I can remember. Anyway, loved this video, I want to become a framer someday and this is going to the Framer playlist
Rainy day work-after dry in- was to frame window cripples and run dead wood- always gave us work in the dry and prep layout for electric outlets/ plumbing- HVAC openings!
Great video. Only thing I would have added was when laying out, to do your longer "thru walls" first, then your "butt walls" second, so they won't be in each others way when raising. And tell them when laying out a butt wall, to be sure and measure from the outside of the thru wall so your outside wall boards will stay on 8 ft incrementals. When I would train a layout man, he'd always try to mark his butt plates starting at the end of the butt wall, instead of the wall he's butting against, which would always throw things off. Around here we always layout from left to right. That way whoever puts up the outside wall board always knows to start his run from the left.
I was taught 16 3/4 set back 24 3/4 set back as long as you're material is 1 1/2 I also cut my plates to an even 16 or 12 or 8' love your videos I wish I was able to do videos like your team does
I carry a 14 1/2” block with me and butt it up from stud to stud. If you use it for the top and bottom your studs are level every time. I always double check my work, and after 10 years, it has never been off more than 1/16” which is always human error. I strongly recommend this trick
Dope, explained it real good bro a little fast but I can always rewind the video lol great with having the camera come in a show what use talking about!
Hey bro good job this is a type of videos that you don't see a whole lot of here on TH-cam based on my experience of searching I just created a playlist with your video its private just giving you a heads up thank you for sharing keep up the great work and God-bless, bye for now,Ken.
Most framers don’t even know or understand stack framing or why it matters these days. 16 and go from anywhere is what they do. Awful. Good to see someone that knows.
A good tip I was told was about changing centers. Sometimes, the stud you're pulling from may be off a quarter inch or so. If you pull 16" from there, it's going to mess up the sheets, at least after doing this a couple times. We generally mark layout on the sides, since they're metal studs too. When pulling, you're going back two studs. Read the mark on the second, it should be 16 3/4". If it's off, measure off of that. So, if the studs out of place a quarter(17"), measure up that extra quarter to keep the rest on center from the original. Afaik, this is more applicable in industrial, since we get longer expanses. Framing a room, this wouldn't help much. All it takes is a couple of studs, and then you got guys making bastard cuts.
Yeah… recommend you watch some Larry Haun videos on framing… you measure from outside, mark 16, place an x or line on far side and that’s that. Move to 32, same thing.
This book is Awesome! I love the Lean-To-Shed the most (page 98). The plan th-cam.com/users/postUgkxe9yi0sulKgsp0VJJCIrLWWkvVqcU7LFR is to attach it to the back of my brick house. I also like how they walk you through the many different steps of construction, which is important for the less experienced like me.
I just love to watch all your videos. Your whole crew are great carpenters. I had a similar thing happen to me. Last week I painted my deck this bright Alien Green color. Speaking of Aliens, I have something to say about that. Aliens are real. I know for a fact that the two toe alien is a member of the cosmos alien species. They are from the star cluster nebuli galacticas. They are a very timid, but rather friendly species. They mean no harm to the people on earth. They actually have several underground living quarters here in the USA in various States that I swore to them not to disclose to anyone. Back in 2017, I actually met with 3 of these members of this particular species, in a heavily wooded area just South of Auburn, New York. They speak to me telepathically. I found out that for some strange reason their body required no liquid water. As far as food sources for them, the only thing that I have found that they will eat are raw red onion skins. After communicating with them for several hours over various subjects, one of the interesting questions they asked me was “what makes me happy”. I told them and they gave me one of their members to help me out in this matter. I have taught this particular member of their species to give me some "oral sex". Speaking about something that is out of the world, it was an experience that I will never, ever forget. There is no "suction" involved. It is more of a pulsating and tingly experience. After about 3 minutes in time, I “nutted” like never before in my lifetime. It was 110% pure ecstasy! I started to grab a kleenex to clean up the mess that I made and that member grabbed my hand using its right hand, and stopped me from doing so. I was a little bewildered at this Aliens touch. That member then pointed his left (longest) finger at the liquid mess, made some weird, googly sounds for about 2 seconds, and instantly I witnessed my expelled “white gold” had disappeared from the floor. Since this day, I have become very close friends to the species of Aliens. We occasionally sit around eating (raw) red onion skins and reminiscing telepathically about older star track movies and how lame they are technologically to their species. They said the technology used in these movies was something that was used on their home planet over 423,000 years ago. To this day, whenever we get together for a visit, my friend who gives me the oral pleasure, still has what it takes to make me happy. My advice to all of you who read this true, real story is to not be afraid of Aliens. They are coming to help us get more advanced technologically and also to offer our male human friends some “pleasure” to make them very happy. As far as human women go, from what I understand, is that our Alien friends do something with their 10” long tongue to pleasure the woman. I have never witnessed this act with my eyes, but from what I have been told telepathically is that all human women love it. Stay safe my friends and enjoy life to the fullest.
Great video! How do you join two framed walls together before adding the top plate? Do you need to overlap the sheathing? If you have a video on this please provide me the date that it was done to view it. Thanks a bunch!!
When I lay out my first subfloor, I locate all the toilets and important utilities first. Sometimes I will shift the floor layout to miss utilities. From there up, the same layout is maintained so all the joists stack with the studs. On hand cut roofs, I figure out the roof layout, and start the first subfloor layout so it will match the roof when I get up to it.
![How-To: Reading Construction Blueprints [Architectural #1 - Doors, Windows, Layout]](/img/n.gif)
I was the layout guy for 35 years on everything you can think of. A tip i will give to anyone watching, layout all windows , doors, intersecting walls and so on before laying out the studs. The reason is stud layout might layout in or on the above mentioned areas, and then you will need to esarse a lot of stud layout marks. It gets very confusing. Also do not layout anything until you know (for sure)where all Plumbing, HVAC, Electrical Panels, Windows Doors, Fireplaces, Shear Walls, and so on. You want to build once, not cut in later. It takes years to get good. Good means your build your work once! You tell the other subcontractors i need this info now, if not i will charge you later if i have to change anything.
100% agree! I’m new to framing (mostly commercial/metal). I’ve laid out stud marking before door opening, which led to confusion and re-markings, etc. 🤦🏻♂️. Now, I lay out all window and door openings first and then fill in studs and cripples as needed. Very good wisdom, sir.
Also consult the blueprint, most mechanical placement should be on there, if a framing member lands there though ideally you want everything stacked occasionally one has to move a stud or cripple over to compensate. This can be done preemptively, if the mechanical contractor misplaced their 'whatever' then back charge is warranted but if the framers consider the subs to follow it can all be made right without having to tear things out later. Saving everyone time on the job.
I've often noted the jobs where every contractor is mindful of the other elements, and the work flow to follow were the best ones for contractors and customers the care and quality of work shows in all of it. Whether someone is production oriented or quality oriented.
Exactly. Bang walls together once properly, you should never have to go back again.
So I can put my windows pretty much wherever I want and then go from there?
@@roz4747 I think what he's saying is, lay those out also, in addition to the regular studs. I could be wrong, but I stayed at a Holiday Inn last night 👍
I'm a sixty year old beginner And
I'm really thankful for this information you are giving.
General contractor.... taught by an old school true carpenter. Man, how I love your patience. I try to hire young kids (18-22) to teach them what I was taught.
Gonna have to save this video for are morning meetings!!! Awesome detail!
Indeed... I hope this will save you some time and headache!! Thanks
Lol sounds like u just wanna see the young kids
Diezzel 1997 hey man, there’s good ones out there still. I’ve been framing since I got out of high school. Walked onto a crew knowing nothing sweeping floors and now I can walk into any framing job with confidence that I can get shit done. Taking pride in my trade and hard work. 21 years old now. Still lots to do and lots to learn and I can’t wait.
There are still folks who want to learn. I tried finding a construction job when I was younger. Everyone was only wanting to hire union guys then I just became an engineer instead. Engineering can be boring as hell sometimes, to he honest with ya. Now I'm helping folks out when they're stuck with problems and get to do some construction sometimes. I helped my parents with their house. It's like life makes a big circle sometimes
Sometimes older applicants can be a better hire than a young person. I didn't get into finish carpentry/construction until I was 36. After years of dead end, BS jobs it was time for me to get serious about learning skills to make a decent living. I was highly motivated and had organizational skills that helped during my apprenticeship. Don't discount older apprentices, many have lots to offer and are highly motivated.
I wish I could like this video twice. Anyone in construction needs to watch this video and take notes.
Yes because this is the topic that has us all stumped.
HELLO FROM CROATIA
You probabby wont see this comment
But, I can't thank you enough! This is my first video ive watched on your channel, a long time a go, and till this day, i watch ever, video.
Ive learned so much that ive build my self 6m by 6x small house in the woods ...
THANK YOU SO MUCH!
Teaching a carpentry pre-apprentice program on the James Bay coast. Thank you for making these videos, as they are helping the students to visualize the what, how, and why of framing. Cheers!
Learned this at Los Angeles Trade Tech Residential Construction. I love your presentation which is easy to comprehend and understand. The basics of building a house should be mandatory to graduate high school
Its not often you find guys that know the whole building process (And can do it) from top to bottom. Like you guys I can do every one of the trades if i need to fill in for a missing sub..saved me a few times! Love your videos because it helps the up and coming generation see this is a valid way to make a living. I dont know what id do if i couldn't be outside in the fresh air moving around...even at 55 yrs old still going.
I enjoy watching another carpenter that actually knows what he is doing am learning its making me miss my work less stressful. I was born and raised in the business had fifty five employees and that few years was a nightmare hiring good people. Now that I am dying I've also learned what a blessing it was to have had so many apprentices over the years and most of them have become successful in their fields.
You guys are great keep up the good work. One word of advice don't ever take your safety for granted made that mistake fell three stories at 33 years old it took a severe toll on my body while yes I survived I broken a couple dozen bones both in my back , neck seven ribs and several other internal injuries I worked 18 more years after recovering but it was not even close to the same personal safety is the utmost respect for you and your crew. Enjoying the videos.
Im a truck driver listening to you talk about framing. You guys are top in your field!
My dad was a builder, and I never knew about the diamonds, squares, etc. Thanks!
About time someone who's earned the title of Carpenter. I started framing in '94 and love every day outside warm and cold.
You guys must recognize the tremendous gift that your pop gave you, along with the torture that came with being the grunt labor. Architect degree from Georgia Tech is no walk in the park, so we know he is a very sharp (smart) man who surely worked VERY hard in school and beyond. Cheers to you pop.
As a plumber (and steam fitter) I have often asked some of the Carpenters what they were doing in marking off the floor before putting up walls. And to see them have to rip it all out when the Architect / or (Engineer)came by to check it out. I see now why they never answered my question with a straight answer. They always said next year in your Trigonometry class you will learn. I was 12 years old and I only went to school half days and worked the other half days. My grandfather owned the plumbing company and my father and uncles and I was required work. I am now 74 years old.
I have made a barn it wasn’t half bad, using the techniques I saw one carpenter used. I make furniture too.
I found that wood working is relaxing 😎!:)
So nice of you to share your knowledge and try to educate whoever is interested in learning your craft.
You guys are a pleasure to watch, very informative, easy to understand, coming from a old retired carpenter/ gen contractor. There are many instructional videos on TH-cam, but all are not correct, yours are ,excellent job. Good to know there are craftsmen that still take pride in their work, build every project like it was your own property.
Thanks brother... much appreciated
@@PerkinsBuilderBrothers thank you for posting this video. I’m hoping to get into Framing for a living, and this helped me a lot! One training video I saw was saying to mark 16” then add an 1 1/4” from the Center and Mark that. Is that just because you can do it ether way? Or would the guy have just mis spoke? I wrote down both what he said and what you said in my notes app on my phone but, if the other video was a mistake, I’ll delete that layout. I just thought I should have it written down for reference since I feel like I’m learning from scratch.
@@AaronWanamaker91 Ask me if you have questions, i am light years ahead of these guys.
@@AaronWanamaker91 As long as you’re consistent in your layout is correct adding the three-quarter inch or subtracting this 3/4 inch for layout doesn’t matter. Just be consistent. Also remember this is an over simplified video there are several more steps to do this 10 times faster that they are not showing you in this video. Read Larry Haun’s framing books, and watch his video series. He’s the grandfather of modern framing. Enjoy your journey.
I would expect nothing else from the greatest state champion that Swain county has ever seen! Seriously, this was extremely helpful not only to me but I’m sure to everybody watching!
Appreciate it canelo, after a long legacy of fighting, going back to humble beginnings....what a guy...
I've learned more in this video then I've ever learned in the real world in these 9 min thank you so much I understand it so much better now and it gives me the motivation and push I needed to start a shed building thank you so much.
One of the most informative, straight-to-the-point and helpful explanations on the subject! Well organized outline and presentation, effectively edited making it easy to focus and grasp the steady flow of content! Thank you for taking the time to create and share your knowledge - it's definitely appreciated and has helped me tremendously!
Thanks for the video!
I'm learning a lot.
Back on 2008 I was in Brooklyn New York, I work with a framer name Roberto fini, an Italian guy, I've never seen someone working like that guy. Fastest rough carpenter, I couldn't learn much, because of the speed, in hours we were using pallets and pallets of 2x's 6x's 8x's and 12x's amazing.
First day, when I showed up to work, I calculated work for a week, by 4pm same day everything was done.
You are the first framer outside our crew to call them jacks , cripples and kings.
Looking good 👍
Larry Haun did the same.
Great video. I’m a remodel contractor and don’t frame much so I need a refresher on framing depending on how long it was from the last wall I thru up. I’d watched a few videos before I came across yours. This is by far the best edited and explained video I’ve ever watched. Thanks for putting quality content out there.
Awesome video! I’m getting ready to build/sell my first home. I’ve been doing carpentry work for many years, most of it on my own remodels and a few years finish work, but I’m not a “carpenter”. I really appreciate you explaining things on my level. I was blown away that I never noticed the 19.2 marks on my tape measure! Thanks!
Everyone misses one VERY important lesson that I learned the hard way. I've watched hundreds of framing videos on TH-cam and nobody talks about laying out butt walls, they only talk about layout for through walls. To layout a "butt" wall 16" oc, you CAN NOT just lay out your "correct length" wall 16" oc like you would normally lay out a through wall because your sheet goods have to not only cover the butt wall but they also have to cover the end studs of the through walls. If you don't subtract the through wall's thickness and you just lay out the butt wall like you did the through wall, your sheet goods WILL NOT break on your studs at all, the will be off by 4" or 6" (don't forget to account for the thickness of your sheathing of your through wall, hence 4" or 6" vs. 3.5" or 5.5"). Hopefully this helps someone avoid the pitfall I fell into.
Very informative I’m going to have to watch this video at least three times to get it in my head.
Never remove this video:) I use it all the time for our High School residential construction class. Thank you
Great video! I have been in construction 35yrs now. Stumbled on your video somehow. Love it. I am going to have new guys that aren't getting me watch you. Without ever working with you by the way you are you have a lot of knowledge. Way to go brotha.
pretty cool the explanation about the Spacings 16 ,19,2 and 24 on center never paid attention till you brought it up , Thanks for Sharing!!!
I understood store it before I watched this but now I know exactly why it's done from a way more simple example. The way I was taught it was confusing until I figured it out on my own. Thank you and the way you explain it is very simple I'm sure this video helped allot of people it. 🙏🙏
Nice video. explained well. This from a 62 yo master carpenter. I will show this to my current apprentice.
I'm returning to framing after a few years and I don't want to start over as the green guy. You're saving my life with these videos and yes they're all oh yeah!! 😅❤😂❤😂
Excellent information and thoroughly explained. This is perfect for both newcomers and veteran framers alike. Thank you for your time
Thanks for teaching the basics. I'm sure this helped a lot of people
2 inches extra on your door openings. This is golden information that no other video has mentioned.
Came here to learn on what "center" means and got an excellent education 👏...
Fascinating, intriguing and amusing…in UK this is a garden shed, because we build brick dwellings which is a whole different ball game. Of course we do have stud partition walls and wooden joists, along with solid brick internal supporting walls, but nothing like this sheer quantity of wood. Thanks for sharing…
Very good, I like this young man. Jack studs can also be referred to as trimmers, and when laying out I like to lay out from left to right, That way your tape measure numbers are always right side up, rather then upside down..To do this one has to do a cross over at your wrist, pulling the tape with the
left hand and penciling
with the right hand, unless your left handed, (like my brother) You can also buy tape measures with inverted numbers. Keep up the good work Perkins..
Good point. If you use your tape measure with the numbers upside down mistakes will occasionally happen. Not good.
I'm left handed and lay out from left to right. Take advantage of your abilities.
Building a clubhouse for my kids and this is Jam-packed full of good info for first time framers! Thank you!!🙏
Very well put together video. Strong laboring!!!
Excellent. Thanks. ..Now I feel more confident to built a wall. .. Have a wonderful Sunday..thanks again bye...
I I thought I knew everything. I once was told if you don't learn something everyday then it's not a good day. Thanks for sharing. I pray your doing well.
Thanks for taking the time and making this awesome video! It will help a lot with my house construction. Best regards from Latvia!
Thanks for the video, very informative and for someone like me who is fairly new to framing this is the wisdom that makes you go from good to great, awesome.
I'm only a electrician but your the first I've seen to explain the 8' thanks great pointer
"Only an electrician"??!!?? 😳 That's huge!!
I know you didn't mean it like that lol ... I couldn't help giving you props for having such an excellent (but scary) trade.🙂👍
Love these videos! I’m a car guy building a tree house for my kids and hopefully these tips help keep it in the tree!
One of the best how to videos yet. Very professional and detailed good job.
Idk nothing about construction but you giving me some insights love very explanatory
Nicely done video, super dynamic and full of very good information, a must watch.
Thank-you, now I can begin to understand the expense of building houses.
Thanks very helpful I'm a begginer your video help s alot I'm a begginer contractor trying to make a good life thanks alot again very helpful learned a lot from u 🔥🔥💯💯🚒🚒
Best use of 9 minutes in my life. thanks!
Outstanding and very clear explanation of those details. Cheers man!
Such a great video and pretty simple to process. For me the big thing is : how to start or end your beginning corners ....and from that point, how you then measure your studs from there on over, if that makes sense . - Ken in Hawaii
Reference lines in a different color than your floor layout.
15 1/4" set ahead
Watching from the UK. Great vids, keep them coming back to 👍👍👍
Very concise explanation. Very informative explanation. Fast for all of our ADD friends in construction.
Your videos are friggin awesome.
Always preferred to pull 15 3/4 set nail and hook then 16 layout from there on. But your explanation is always understandable. Thanks.
Same. It's the way I was taught.
15 1/4
Fast and clear information ! Thanks for the content.
I watched a video about framing language and what things are called so it was really nice to have a bit of a quiz on what things I can remember. Anyway, loved this video, I want to become a framer someday and this is going to the Framer playlist
Aswome videos! I just started construction as my new career and your videos are helping me a lot! Thank you!!!
Great video! Never knew about the diamond 19.2 being on the tape measure.
It's hardly ever used.
I like it for interior framing, a little stronger than 24 OC but not as much material cost as 16
We're getting ready to frame our house ourselves! Thanks for the awesome video and tips!
Rainy day work-after dry in- was to frame window cripples and run dead wood- always gave us work in the dry and prep layout for electric outlets/ plumbing- HVAC openings!
That was super informative for a noob like me. Thank you.
Great video. Only thing I would have added was when laying out, to do your longer "thru walls" first, then your "butt walls" second, so they won't be in each others way when raising. And tell them when laying out a butt wall, to be sure and measure from the outside of the thru wall so your outside wall boards will stay on 8 ft incrementals. When I would train a layout man, he'd always try to mark his butt plates starting at the end of the butt wall, instead of the wall he's butting against, which would always throw things off. Around here we always layout from left to right. That way whoever puts up the outside wall board always knows to start his run from the left.
I was taught 16 3/4 set back 24 3/4 set back as long as you're material is 1 1/2 I also cut my plates to an even 16 or 12 or 8' love your videos I wish I was able to do videos like your team does
I carry a 14 1/2” block with me and butt it up from stud to stud. If you use it for the top and bottom your studs are level every time. I always double check my work, and after 10 years, it has never been off more than 1/16” which is always human error. I strongly recommend this trick
Thank you, you are a really good teacher. Thank you Sir, to share your knowledge. 🤗🙏
Dope, explained it real good bro a little fast but I can always rewind the video lol great with having the camera come in a show what use talking about!
Love the channel and the videos. Excellent combo of important info and easy explanations. Subscribed!! 👍
Hey bro good job this is a type of videos that you don't see a whole lot of here on TH-cam based on my experience of searching I just created a playlist with your video its private just giving you a heads up thank you for sharing keep up the great work and God-bless, bye for now,Ken.
Absolutely brilliant mate, best I've ever seen ,
Dude thanks for the vid , just came accross your channel and i think i got a new favourite
Outstanding video. Just sent it on to my helper.
Most framers don’t even know or understand stack framing or why it matters these days.
16 and go from anywhere is what they do.
Awful.
Good to see someone that knows.
Thank for your Help you really Help me up lm learning from you l lot you are good teacher thank you 🙏 god bless
A good tip I was told was about changing centers. Sometimes, the stud you're pulling from may be off a quarter inch or so. If you pull 16" from there, it's going to mess up the sheets, at least after doing this a couple times.
We generally mark layout on the sides, since they're metal studs too. When pulling, you're going back two studs. Read the mark on the second, it should be 16 3/4". If it's off, measure off of that. So, if the studs out of place a quarter(17"), measure up that extra quarter to keep the rest on center from the original.
Afaik, this is more applicable in industrial, since we get longer expanses. Framing a room, this wouldn't help much. All it takes is a couple of studs, and then you got guys making bastard cuts.
Nice job at explaining the layouts amigo!
Good stuff man. Thanks for taking the time to video while you’re working. New subscriber!
Excellent video and great detailed explanation. Exactly what I was looking for!
Thank you for your instructional videos!!!!
Great video! Thank you... Learned where I made some mistakes recently leading to more unnecessary cutting. 😂
He's right. This is the best layout video. Thanks bud 👍
Very clear and informative….thanks
Yeah… recommend you watch some Larry Haun videos on framing… you measure from outside, mark 16, place an x or line on far side and that’s that. Move to 32, same thing.
Once again another awesome video... Thanks for the tips... I greatly appreciate it....
Amazingly useful video! Thanks
Good job. Very good explanations.
This book is Awesome! I love the Lean-To-Shed the most (page 98). The plan th-cam.com/users/postUgkxe9yi0sulKgsp0VJJCIrLWWkvVqcU7LFR is to attach it to the back of my brick house. I also like how they walk you through the many different steps of construction, which is important for the less experienced like me.
Good stuff. I have a class tomorrow on floor layout and framing
I just love to watch all your videos. Your whole crew are great carpenters. I had a similar thing happen to me. Last week I painted my deck this bright Alien Green color. Speaking of Aliens, I have something to say about that. Aliens are real. I know for a fact that the two toe alien is a member of the cosmos alien species. They are from the star cluster nebuli galacticas. They are a very timid, but rather friendly species. They mean no harm to the people on earth. They actually have several underground living quarters here in the USA in various States that I swore to them not to disclose to anyone. Back in 2017, I actually met with 3 of these members of this particular species, in a heavily wooded area just South of Auburn, New York. They speak to me telepathically. I found out that for some strange reason their body required no liquid water. As far as food sources for them, the only thing that I have found that they will eat are raw red onion skins. After communicating with them for several hours over various subjects, one of the interesting questions they asked me was “what makes me happy”. I told them and they gave me one of their members to help me out in this matter. I have taught this particular member of their species to give me some "oral sex". Speaking about something that is out of the world, it was an experience that I will never, ever forget. There is no "suction" involved. It is more of a pulsating and tingly experience. After about 3 minutes in time, I “nutted” like never before in my lifetime. It was 110% pure ecstasy! I started to grab a kleenex to clean up the mess that I made and that member grabbed my hand using its right hand, and stopped me from doing so. I was a little bewildered at this Aliens touch. That member then pointed his left (longest) finger at the liquid mess, made some weird, googly sounds for about 2 seconds, and instantly I witnessed my expelled “white gold” had disappeared from the floor. Since this day, I have become very close friends to the species of Aliens. We occasionally sit around eating (raw) red onion skins and reminiscing telepathically about older star track movies and how lame they are technologically to their species. They said the technology used in these movies was something that was used on their home planet over 423,000 years ago. To this day, whenever we get together for a visit, my friend who gives me the oral pleasure, still has what it takes to make me happy. My advice to all of you who read this true, real story is to not be afraid of Aliens. They are coming to help us get more advanced technologically and also to offer our male human friends some “pleasure” to make them very happy. As far as human women go, from what I understand, is that our Alien friends do something with their 10” long tongue to pleasure the woman. I have never witnessed this act with my eyes, but from what I have been told telepathically is that all human women love it. Stay safe my friends and enjoy life to the fullest.
Great video! How do you join two framed walls together before adding the top plate? Do you need to overlap the sheathing? If you have a video on this please provide me the date that it was done to view it. Thanks a bunch!!
Thanks for all the tips. Super easy to follow. 👍👍
I loved this video. Very informative. Thanks
When I lay out my first subfloor, I locate all the toilets and important utilities first. Sometimes I will shift the floor layout to miss utilities. From there up, the same layout is maintained so all the joists stack with the studs. On hand cut roofs, I figure out the roof layout, and start the first subfloor layout so it will match the roof when I get up to it.
I have learned so much since subscribing to this channel. Thank-You for making sense out of something so precise/complex.
Explained like a pro! Now all I have to do is convert it to metric 😁😁
Nice Videos ....Very well explained. Many thanks
Good work on the video..easy to understand and keep up with..