i searched whole hyderabad and internet but couldnt find the same carbons. so i shaped the same carbons and fixed it. and it is working for now
Awesome video. I am planing to replace worn out brushes for my motor. Also I will shot and upload video for such repiar.
Thank you now I can replace the carbon brush of my motor.
Thanks for the video. Suggest you add how to pop-off and re-install the end plate near the brushes. I'm guessing you "uncrimped" the edges of the cylinder housing, and then bent them back down a bit to re-install. Thanks again.
Nice helpful video.Congratulations
you helped me to repair my old and favorite cordless drill.... thanks bro..= like+sub...
Great job
Very well done sir
You are the best tks a million now need to find brushes but all shops close due to covid-19
Thanks
Got it...
Will just replace a whole motor
Well done man
what do you think the problem is with my motor? it just clicks once inside when I try to start it.
how did you attach the new brushes? it doesn’t look like you glued them in or anything.
Thanks man
Thanks for this video. Does the replacement motor you gave in the link fit Bosch electric screwdriver model GSR 10.8v V-LI-2 ?
Don't Know, please check electrical screw driver motor specification with this motor. The shaft size may vary.🙂
Bosch GSR 10.8v use rs550 dc motor, im waiting the dc motor from the store to replace the cordless impact drill bosch GDR 10.8v, do check my channel how to restore / replace the bosch cordless DC Motor. Thanks in advance
Thanks
Hi Sir, your video has help me! I have a 14.4V battery drill and its carbon brush its not the typical kind with spring. And its not on the market. I followed your method and it works great! But perhaps you would know how to make the thinner part of the brush to be tight fit into the holder?
Please Click the Time Below:
1:58
Please use a file to make this tiny part. Measure the square hole size of Copper contacts and file the carbon as the same size. This has to be done very carefully and patiently.
I read your reply too late. It snapped out of the holder and grazed the armature badly 😅
Bhai main na same trick ki but 5 mint k ander he carbon giz gaya or motor band ho hai kiya masalho sakta hai ya ?
Sir ye varnan brush kaha se mila
goodjob
Bro where will i get that carbon from ?? 🙏
Where did you buy that carbon brush?
सर आप जो ब्लॅक कलर का लगा रहे हो उसका नाम क्या है प्लीज बताईये
والله انت برنس
Kayak dinamonya bosch corless ya om?
Please make this video in detail please
Kya baat hai
*Please Visit and Subscribe our TH-cam channel **th-cam.com/users/Vtipcom** for more updates*
This carbon replace with soldering or glue??
No Soldering or Glue Used., It has a tiny lock system on the end of carbon brush.
Kitna din chalta hai yeh carbon
How many hours does that carbon brushes last? 😳
Tangan e wong jowo kuwi... 🤣🤣🤣👍
I cant understand why don't they make it somewhat easily serviceable :((((
Aren't there at least the same brushes being sold or the only way is to make your own?
cause they want you to buy a new drill instead of servicing the old or just go out and spend even more money to buy a brushless one.
From where do you bought it please let me know
please click the link below
th-cam.com/users/redirect?q=https%3A%2F%2Fwww.banggood.in%2Fcustlink%2FvvG3Cm0Zk1&event=video_description&v=dEJVSvrUVTA&redir_token=nguqHjSDH_oPqobhg2fOlGiHVVx8MTU1NTY1MTc3NkAxNTU1NTY1Mzc2
Greay
Bus ki Pati Tut Jaaye Kaise banaen
Kitne din chalega ye or ditne ghante ke baad change kr na padega ?
Bhai main na same trick ki but 5 mint k ander he carbon giz gaya or motor band ho hai kiya masalho sakta hai ya ? Motor rs 550 hai
Hi, how do you open the motor?
This has to be done very carefully and patiently. You can find 4 locks at the back of the motor. Pull this locks up by using a nose plier or screwdriver or a punch. Once you have done this you will be able to remove the rear cover along with the connectors.
Good h
How did you shaped that carbon brush
Please Click the Time Below:
1:58
Please use a file to make this tiny part. Measure the square hole size of Copper contacts and file the carbon as the same size. This has to be done very carefully and patiently.
Automatic watering controller using Arduino/ uno board (Simple Project, No experience required)
Please watch and share
👇👇👇🤗
th-cam.com/video/EvBiTLfXPOo/w-d-xo.html
The brush where we buy
You can use any kind of carbon brush. You can see that in drill or grinder machines and mixer grinders.
This is nice but you can buy cheap full assembly set online and no need to do that.
ممحمممج.۹
کک
Thank you so much! I learned I can shape carbon brushes. I had a couple laying around for years that finally found their purpose! Kind regards and happy 2024!