very nice tutorial nice paintjob just what i noticed you cut of the seam but you still could see a bit of it i use my dremel to get the seams more away on my mask almost till you had no seam but i really find this usefull video gonna take it with me if i gonna paint my predator mask :)
awesome vid i'm a big pred fan i like painting 1/6th scale really appreciate this vid as the pred is a tricky sculpt to paint ,also i like the Narin predators on the shelf awesome stuff well and truely SUBBED!!!!!! :)
hello this is amazing videos give me some tips when i am goignt o try and make my own predator with skin tone and desing. any certain air brush style u recomind.
@@creativecompositions3747 okey thanks i am going to buy a airbrush for latex mask paint applications i now i have to get a new compressor sense i got the basic iwata starter set one, i am printing a resin predator head to guve the scheme a test scene the one i am doing is based on gators and crocs
This looks more like the Joe Ta 13 amature! Did cut of the overflap edges with a round nail cutting pair of scissors but with a way to large flat pair instead. And he should use citric accid to make the surfis skin more rouf so the paint would attach much better, especialy if it will be worn. But who am i to say!?
absolutly beautiful...thank´s for this . Just one more question,: how do you attach the dreads and spikes on a mask like this? the holes dont look deep enough. Amature here, sorry....
I've used superglue but any glue like gorilla glue or something would work too. Also I've seen people cut a small X in the center for the dread and push it a little through into the mask and then glue it, gives a little more hold.
hello friend great tutorial. The only drawback is that I am Spanish and my English is not my good. all the paintings are mixed with the adhesion promoter, proportion 1 to 1? You mention using 20 pounds of pressure, is not that much pressure? I had the intention of painting over 2 to 3 kg of pressure regards
Can you list the brands of paints and what you are mixing them with here? It's a bit hard to hear on the video...that or I was just too interested in what you were doing to understand what you said.
HI there - in step 11, did Joe come in with Burnt Sienna? It's really hard to hear. I got most of the other colors down ... that's the one I need some clarification on. THANKS!
travis fultz You can explain to me all the colors it uses in order. to buy them please I am starting I am from Costa Rica I need the names of the paintings or some code that mw allows to recognize them thanks
@@danielbrenesmora4443 It's been so long I honestly can't recall them all. It doesn't have to be the exact colors you use either this is more a general guide so if you go out and see a shade of say brown you like better you can use it instead. I do plan to get with Joe and do some updated tutorials and I'll have a detailed list of all his colors etc here in the near future.
I was wondering about your base coat premix because I used createx flexible adhesion promoter, and liauitex acrylic titanium White and mixed them 1 to 1 and it is way to thick to go through the air brush did you use anything else?
Hi Trav, I was looking to have a pred bust commissioned from Mr. Evans. Is there a way to set something up? I'm specifically looking to have the P1 done. Thanks
I don't recall the brand off hand but if you got to a Michael's or hobby lobby just look for a clear gloss spray and find one that says flexible. There should be decoart or krylon, and others.
+Black Head Do you want one painted or raw? If painted go on facebook and search Joe D Evans in reynoldsburg oh and contact him, he will hook you up. PM me if you want an email address.
+travis fultz Hello friend .. I thank you very much ..... because you guided me. I've watched all the videos how to make a mask and coloring Predator and Illg external mask the fact .... a fantastic achievement and a stunning ... how to buy a full mask with face shield cover ... Note . Mention the name of the store Is the store sells online .. Do you store in the United Kingdom or in the United States Do you have a ship to Sweden and how much is the cost With thanks and appreciation to you and your company a friend I am waiting for your response Emile : alixvx77@yahoo.com Facebook : Eric Alex Facebook . link : facebook.com/profile.php?id=100010851282575
@@smallnuts2 I’d not heard of that one but that looks very impressive. I’ve heard resin comes out much more finished and ready to go than the filament printers but then you have to deal with the resin toxic fumes, cleaning, storing, etc. so it’s a trade off but I’d love to have one side by side to test!
Great looking Pred. I've painted a few myself and will remember a few tips from this video if I ever do again.
Wow looks amazing you’re amazing painter I really love the product can wait to see more of your work fantastic
This is badass! About to get my latex predator mask and this video is going to be super helpful. Thanks a bunch👍🏼
We're do you get the masks?
Nice work again....keep up the good work...grtzzzz from Belgium
This was great!
AMAZING video ! Fantastic work ! KUDOS !
very nice tutorial nice paintjob just what i noticed you cut of the seam but you still could see a bit of it i use my dremel to get the seams more away on my mask almost till you had no seam but i really find this usefull video gonna take it with me if i gonna paint my predator mask :)
Amazing job!!! :)
This help me out a lot on my predator costume thanks
Holy shit! Amazing tutorial !!!
Brilliant tutorial
awesome vid i'm a big pred fan i like painting 1/6th scale really appreciate this vid as the pred is a tricky sculpt to paint ,also i like the Narin predators on the shelf awesome stuff well and truely SUBBED!!!!!! :)
Lets get this man to 1 million subs
Great Joe!!! Much appreciated the video!
Some Talent you have WOW.
Great mannnnn !!
Wish to see hair / dread lock on it too. 😊
love predator cool model
Hey thanks for the video, now I know how to get started
I LOVE your job verey mcuh
hello this is amazing videos give me some tips when i am goignt o try and make my own predator with skin tone and desing. any certain air brush style u recomind.
I like the iwata eclipse line, good airbrush and not super expensive.
@@creativecompositions3747 okey thanks i am going to buy a airbrush for latex mask paint applications i now i have to get a new compressor sense i got the basic iwata starter set one, i am printing a resin predator head to guve the scheme a test scene the one i am doing is based on gators and crocs
@@zanruos88 very cool, I'd like to see it when you're done!
@@creativecompositions3747 ahh thanks I just got massive sketch art for it it's my first latex is thoer way to share pics in TH-cam comments
predator!!!! oh yeah!!!!!! good job
Good stuff. Maybe you can show how paint a narin hunter?
This looks more like the Joe Ta 13 amature! Did cut of the overflap edges with a round nail cutting pair of scissors but with a way to large flat pair instead. And he should use citric accid to make the surfis skin more rouf so the paint would attach much better, especialy if it will be worn. But who am i to say!?
absolutly beautiful...thank´s for this . Just one more question,: how do you attach the dreads and spikes on a mask like this? the holes dont look deep enough. Amature here, sorry....
I've used superglue but any glue like gorilla glue or something would work too. Also I've seen people cut a small X in the center for the dread and push it a little through into the mask and then glue it, gives a little more hold.
My dream mask...one day
Hi mate love your videos have you got a link for scouts masks please any help would be much appreciated thank you
I don't know off hand who makes one but take a look on www.thehunterslair.com/ and you should be able to find some info.
hello friend great tutorial.
The only drawback is that I am Spanish and my English is not my good.
all the paintings are mixed with the adhesion promoter, proportion 1 to 1?
You mention using 20 pounds of pressure, is not that much pressure?
I had the intention of painting over 2 to 3 kg of pressure
regards
Can you list the brands of paints and what you are mixing them with here? It's a bit hard to hear on the video...that or I was just too interested in what you were doing to understand what you said.
Hi I'm just a kid but I like your job
I liked the video, please you can tell me what material you used to do it or maybe a manual was really grateful to you
Thanks that would be awesome
columbus represent!
Dang, that bottom left tusk isn't aligned, they look like separate pieces
Lol dont worry about cleaning it too much scott never used an release agents on anything i bought from him some stuff i got was fused together
Cool mask
Hi JoeI need to buy a latex mask like the one you are showing there. can you let me know how?
+JOE SANCHEZ
Joe, Go on facebook and look up Joe D Evans he can get you one.
How to thin down paint > any Flow Enhancer or Lamiam medium? (which is a paint thinner). Cause my airbrush got plug up
HI there - in step 11, did Joe come in with Burnt Sienna? It's really hard to hear. I got most of the other colors down ... that's the one I need some clarification on. THANKS!
+Rob Stachowicz
I believe that was the golden shading grey.
Perfect.
I want one
friend good afternoon how could you get one of these masks, and what is your value? thanks
Hey Travis , what base and color would you use to paint the “Wolf Predator “ mask . Thanks in advance.
I'll have to talk to Joe and see if we can match up schedules to paint one up!
Will spray paint and acrylics work ???
You could use spray paint for the base coat (I do) and acrylics should be fine as well.
What are some brands of glue to glue the teeth in that won't damage the mask?
Honestly I'm not sure, we've just used generic super glue for years and not had any issues.
Do you mix the adhesion promoter with each layer of paint? Or just the base? Or only certain layers?
Christine goddess believe it was just the base
wow bro I likey
Would you ever do one to sell and if so how much would appreciate any info 👍
Joe has some for sale from time to time shoot him a message facebook.com/joe.d.evans.3
So basically mix the adhesion promoter and primer together for the base coat and do I need to use some kind of protector once I'm done painting?
yes, at the end when you're finished you'll want to seal it. Look for a flexible gloss spray at your local crafts store.
@@creativecompositions3747 Do I need to mix adhesion promoter into every layer of paint or just the base coat?
Alex_Hayashi just the base
😊😊😊😊😊😊😊😊😊😊😊😊
Where do you get this mask?
Message Joe and he can point you in the right direction facebook.com/joe.d.evans.3
What‘s that intro-song ? Thanks in advance !
Who is the second color?? Thaks!!
raw sienna
travis fultz gracias!! Thanks!! 😁
travis fultz You can explain to me all the colors it uses in order. to buy them please I am starting I am from Costa Rica I need the names of the paintings or some code that mw allows to recognize them thanks
@@danielbrenesmora4443 It's been so long I honestly can't recall them all. It doesn't have to be the exact colors you use either this is more a general guide so if you go out and see a shade of say brown you like better you can use it instead. I do plan to get with Joe and do some updated tutorials and I'll have a detailed list of all his colors etc here in the near future.
travis fultz thanks .. I managed to paint it
I was wondering about your base coat premix because I used createx flexible adhesion promoter, and liauitex acrylic titanium White and mixed them 1 to 1 and it is way to thick to go through the air brush did you use anything else?
Yea you'll need to thin with water, 1 paint to a 50/50 of adhesive and water. Should thin it enough to shoot it.
Hi Trav, I was looking to have a pred bust commissioned from Mr. Evans. Is there a way to set something up? I'm specifically looking to have the P1 done. Thanks
Joseph Chavez shoot him an email dani27_1999@yahoo.com
Hi, where can i buy a Mask lithe that, no paint no dreads??
Contact Joe D Evans on facebook he can get you pointed to one.
Why is the inside of his mouth red blood pink if his blood is a fluorescent greenlit sound be a off color white
Stan Winston took that secret to the grave with him I believe.
Padre tengo que hablar algo con usted con mi mamá me entendió por favor
What kind of the adhesive that u use? On step 5
Createx adhesion promoter
where do you get the mask
Contact joe directly he may have one or can point you in the right direction. facebook.com/joe.d.evans.3
ok
thank you
where do you get the helmet
Por favor me vendes la máscara si vives en otro país No lo sé
what colours did you use
+Ethan Hall
He talks about them at the start of the steps, i can't recall all of what he used offhand though.
What brand of liquitex varnish chrome in step 17?
Varnish chrome? No chrome was used for this.
sorry my mistake, i mean what sealer was used in Step?
I don't recall the brand off hand but if you got to a Michael's or hobby lobby just look for a clear gloss spray and find one that says flexible. There should be decoart or krylon, and others.
top
How much to paint a resin predator head?
Contact joe directly for a quote facebook.com/joe.d.evans.3
Can you make more to sell to money like real job
Hi ...
How can I buy one and the same this mask ...Is the owner of the video has a site to sell online ...
With thanks to those who tells us Store
+Black Head
Do you want one painted or raw? If painted go on facebook and search Joe D Evans in reynoldsburg oh and contact him, he will hook you up. PM me if you want an email address.
+travis fultz
Hello friend ..
I thank you very much ..... because you guided me.
I've watched all the videos how to make a mask and coloring Predator and Illg external mask the fact .... a fantastic achievement and a stunning ... how to buy a full mask with face shield cover ...
Note . Mention the name of the store
Is the store sells online ..
Do you store in the United Kingdom or in the United States
Do you have a ship to Sweden and how much is the cost
With thanks and appreciation to you and your company a friend
I am waiting for your response
Emile : alixvx77@yahoo.com
Facebook : Eric Alex
Facebook .
link : facebook.com/profile.php?id=100010851282575
What kind of airbrush are you using?
malcolm watt iwata eclipse hp-cs is the airbrush being used.
+travis fultz
hello
can I buy the painted mask?
+Alex Kirchknopf
facebook.com/joe.d.evans.3?fref=ts
contact Joe and he can let you know what he has.
What are the teeth and mandibles made of?
They are made out of resin
What exactly is used in step 11
Been so long I don't recall but I believe it was by golden "shading grey"
How much for one of these?!
Hit up Joe and he can tell you prices if you're interested in getting one done by him. facebook.com/joe.d.evans.3
🤔🤔🤔🤔🤔🤔🤔🤔
parabéns pelo trabalho, gostaria de ver a mascara com os dreads ^^
Is you went to know who I'm and name is lim seng hour in the missenger
What printer did you use? I'm looking to get into full size printing.
It’s not printed it’s a cast of a sculpt. That being said however I did just order a Elegoo Neptune 3 max I look forward to messing around with.
@Creative Compositions I'll check that out. I heard the Phrozen sonic mega 8k is the biggest out right now.
@@smallnuts2 I’d not heard of that one but that looks very impressive. I’ve heard resin comes out much more finished and ready to go than the filament printers but then you have to deal with the resin toxic fumes, cleaning, storing, etc. so it’s a trade off but I’d love to have one side by side to test!