It must take forever to film your videos!! It's so nice to see all the different angles you capture!! I love watching someone tackle something like this & make it work well - such an accomplishment!! Great job - always!! You placed that tree perfectly 🌟 God bless you and your family!! Ooops, commented too quickly - your son is so precious. Thanks for sharing 💞
I just can't get over how much you remind me of my dad. He could fix anything. He always said a new chain never cut worth a damn. He always sharpen his by hand. Most of the cutting we did was for fire wood. He would cut some timber to make into lumber. He didn't have a sawmill so it was a lot more difficult. He would go to a mill that was close to us and purchase a ton of their drops for almost nothing. It was amazing how he would make such fine lumber out of their scraps. He did a lot of cabinet work on the side. I know he made some really nice ones, costumed made for people who had older farm houses. Generally things weren't square but when he finished a kitchen or bath, it looked better than any store bought cabinets. I do love your videos. At my age all I have are memories. I think of all the hours I spent with my dad from little up. We were great friends. He was a great dad. I tried to be a great dad to my kids. My son tells me I was far better than his friends fathers were. I saw your son, never leave him out. The things you do with him even little, he will carry with him the rest of his life. Yes, I fell asleep many times in the truck.
My daddy was the same. , he could fix anything even if he didn't have the parts he would always make it work. O and I swear he could catch fish out of a mud puddle and shoot big bucks in his sleep. It's like trophy animals and fish wanted him to get them. Im happy if I get a squirrel
I heated my house with hardwood for 10yrs, back in Indiana 75-85, cut and split by hand, had an Echo VL-452, hell of a saw, never failed! tks and best 2u
I have a L65 myself purchased new some 40 years ago, still runs like new, very powerful saw. Replaced fuel line, bar, pull rope, etc. Occasionally check the spark arrestor screen in the muffler muffler, and the bottom of the saw, the screen for the chain oiler. Great saw.
That a great video , thank you ! Great saw . I love the close ups , coupled with minimal commentary . Very professional and very watchable . Liked & subscribed 👍
I bought one new in 79 and it was 80cc and in 80 I bought a new 44cc ! Great saws and reliable the 80 cc saw never missed a days work !! The 44 cc missed several days over a starting issue !! From the saw shop I used to go to , first thing I learned on any chainsaw and remover the flame arrestor like you did, with a good light look into the cylinder
I like this video. Well done sir. Saw sounds great for being 40 years old. Now I'm inspired to dig out a couple of the old timers, like yours, I'm my collection, and disassemble them and perk up the ports a bit with the grinders, and make them snort again!
Nicely done! I loved the aerial shot when the tree fell too! I use my old 038 MAG II. It works well with a 24 " bar and chain. No Compression release like the new ones either. hard to start if it's below 20 degrees.
Nice one Wes! That looks like a good old Husky! As an amateur occasional user of Chainsaws (I've got 6, Gasoline & electric!) I find the usual thing that gives trouble first is the Oil feed system to the bar. Be great if you could do a video on fixing issues with that. Stay safe & well! 👍👍
I have a beautiful full restored L65. Love that saw to death. Spent about 2 years looking for one, finally found it on a Northern California facebook group. hangs proudly in my garage
Good video - Great son. I love to watch the interaction please keep including him and your lovely wife. I've watched all your videos and am almost current. Your testimonies to our Great God and Savior are refreshing and encouraging - keep it up! Jim
Great video! I have owned and run Stihl saws for over forty years, but on a whim about 2 years ago I bought a Husqvarna 565 with 20" bar. Because I liked it so much I now own several Husky's and love them. They just plain rip! I might have to look for a vintage Husky after watching this. I also have a Wood-mizer sawmill, LT40 super with 42hp Kubota diesel.
First chainsaw I purchased was "Husqvarna 65" made in Germany... single ring on piston.... started my own firewood business in 1980....yet cut & sold firewood on the side before then.... weekends & nights & days when I had a chance, even holidays....cut 100's of cords, yrs. & yrs.& yrs.... even did tree work with it....it's what made me buy Husqvarna saws everytime I needed a saw....smaller ones & larger ones....they all have proven to be simular as the first one, in late 70's or early 80's...shop full of them now at 72 yrs. old
Besides being into saws- you are a great videographer! Nice shots, great editing, interesting composition of shots and content. I think your video was great as much for your technical skills with the camera and editing software as for your vision of composition and content. Thanks for posting.
I have a 77 I bought in 1978 $450.00 it was a bow saw I changed it over to a bar. I cut fire wood in high school. I took the baffle out to make it loader . High school kids with glass packs LOL. Have lost the parts I would love to get it running.Brings back some memories I cut my knee open with that saw when it was bow saw . The government deemed them unsafe that's what I Was told that's why you can't buy the bows anymore . thanks for sharing .
I bought a new Husky l 77 in about 1975. They were a good saw. After a few months I traded it for a new Husky 1100. That 1100 was a wildcat. The best balanced and powerful saw I ever ran.
@@logdog8920 : the cylinder has some fins missing at the top , otherwise i might have tried to get it running . someone was using it to power an alaska mill at some point but gave it to me knowing im into saws . i have a bigger husky for bucking big stuff , so i didnt really bother with it .
..I clicked on this video as soon as I saw the 77!..I had a 77 several years ago, got it from the scrap yard of all places..no bar or chain. Got it running with a carb kit and a fuel line, put a used 24" bar and chain on it I had, and man, it really ripped!..much more than I expected..just no anti-vibe, but that's O.K...I used it as a firewood saw for a couple years, then it developed a rattle..still ran good..then, one day it just stopped mid-cut..took the P&C off and discovered the big end rod bearing had let go..so into a box it went. Miraculously, the P&C were still o.k., just needed a new crank..over the years, I've picked up 2 or 3 more 77 carcasses with good compression..maybe this video will give me the motivation to finally get around to getting a running 77 put together again :)..BTW, the easiest way to spot a 77 from a 65 is the spark plug sticking out the top of the 77-it's hid under the cover on a 65...I've seen lots of 65's over the years, and have several non-running 65's..I've been told a 65 and 77 bottom end, including crank, are the same as a 77, so maybe you could just swap the complete bottom end/housing from from one of those 65's to fix the 77..one thing I have noticed, though, is all 77's I have encountered have electronic ignition, and most 65's seem to have points..I would check for that if you do the swap, although you could likely change out the ignition as well..I would use as late-model 65 as I could find as the donor saw..as a final note, I always wondered why so many more people opted to buy the 65 over the 77, given that you have much more power with basically the same size/weight saw..was it that everybody was too cheap to pony up the extra $ to step up to the 77?..seems like it would have been very worthwhile, to me...I wonder the same thing when I see all the old 61's around and so few 66's and 266's..again, same basic saw, with much more power....
..I think around 1985 or so was the last the 65 and 77 was built..and you will love the 24" bar on that 77..it will pull it with no problem, and a 24" balances out real nice on those saws.. :)
77 Husky is a bad boy. I cut a lot of pulpwood and short logs with one back in the early eighties. My daddy bought hi first one in the late 70's. I'm very happy for you I wish I could find a good 77. I see a few 65's here and there but a 77 is a rare gem.
Gotta admit that I’m not a big husky fan, but I absolutely love the sound of that saw. Looks like it might not be the fastest, but sometimes it’s not always about speed. Nice saw man
Theyre a lazy but authortive saw. Loads of torque but sadly not a whole pile of chain speed. Think they maxed out at 8000 rpm under no load and lug down to 5000 to 6000 when under load. These and the 65's had a great exhaust note
I can relate to your love of old saws. I’m an old McCulloch fan. When you started pulling out all the old saws you have I just laughed. I’ve got more than I care to admit from the 60’s and 70’s. It’s an addicting hobby lol
I chuckled, too. "Baddest" chainsaw being a 77cc saw? Heck, a Wright C-50 or McCulloch 7-10A is in that range. Try going up to the McCulloch Super Pro 125 (the original steel-sleeved cylinder that can be bored over, but starts at 123cc), running at 11,000rpm and nearly 15hp. But yeah, when you have your eyes fixed on a certain vintage model, and it finally shows up and you're successful in grabbing it, it's like the jewel in the crown.
I had both a Husqvarna 77 and a Sthil 056 Mag 2 . I put a lot of timber on the ground with both those saws. Other than that Mcculloch super pro 125 these were my all time favorite chainsaws .
Wish I kept all the old Huskies that I used when I worked at the sawmill. The new ones are nice by the old ones were like holding a dirt bike. A lot of power.
those 77s were some good saws. dad cut pulpwood and sawlogs with the 77s in the 70s and early 80s sometime they did put chain breaks on them --i would guess around 79-80 . i can recall running those some those myself . they were reliable, had gobs of torque. seems like most of them had the 24" bar and would pull it with ease even through tough hard-wood. they slowly replaces the stihl 041 supers on the logging job IIRC.
@@falllineridge I enjoy watching you in God's natural world and the talent and skills he gave you. You are very welcome. Thank you for sharing with me what I wish I could do. And I loved how excited your son was with his toy box. That was plain joy.
in old yougoslavia you had the same saw but it was called tomos 770. It was made by licence of husqvarna L77. I recently got one and it is a beast. Just need new dog for it but was thinking of putting 2 dogs because why not. But the issue is that I have to make them myself as you can't buy them basically
I had a L65 for years they were great saws almost indestructible, outside of a set of rings l never did anything but routine mantince and it ran as strong the day l sold it as the day l bought it.
I’m sure you know what to look for in the cylinder ( ever been run without oil?). Next inspect the piston and ring or rings , using a small screwdriver press on each piston ring which should push back at you!! If all check out , compression test cold then hot is next!! Good find you did well!!
That is a Great one glad I have one. I’ve saw 2 farmers spend $300 each repairing their 65 vs buying new saw. Classic saw 77. Dud get a logging tape and put a horseshoe nail on it. That tape has got to Go!
After my dad logged with a Husky 77 and I still have it after he passed away , Im sure we found a bill of sale in 1971 ,But i will have to recheck that after hearing your comments. Anyway the flywheel blew apart on me while I was using it , Does anyone know where I might be able to find one ? thank you
I bought my first Husqvarna l65 back in 77, landed a big tree on it in 79 then bought another one, had that one until 85 then traded up for another number Husqvarna. Now I have 2019 550xp, pound for pound it will out cut my old l65 with half the weight and I sure do prefer the modern chain brake..... I thought you had a pto winch......
Sometimes I think you are from 1950s Oregon logging family. You cut the mouth, started and checked the hinge, corrected, wedged, and finished it over. Unlike the deep woods, you trimmed the stump flush like proper in a small family wood lot so it wont be a trip hazard or foul a small skidder tractor. Great job!!!!
Those chips were nice even before sharpening. Husqvarna makes a really good saw. I bought one used (almost new) from an older man that just couldn't handle the saw's weight. It chews through logs like nothing I ever had. Now I am of the age that the weight is difficult for me. Oh well....
Why did you fell the live tree instead of the dead standing? I could be mistaken, but the areal view appeared to show some DS, and for safety reasons I would have removed them. Cool saw.
..15:58..just saw all that pitting on the bottom of the saw..sooner or later, it will likely lead to an oil or fuel leak..that, with the break/damage you already noted, I would be on the lookout for a donor saw with a better bottom end..and have fun with it in the meantime!.. :)
I am fortunate enough to have a 77 with a bow. The thing is a beast. I'd like to have a dollar for every 65 that was in use during the hey day of five foot pulpwood.
When I was a kid my father used to cut pulpwood and ply logs. Every little community in west central Georgia had a pulpwood yard and ply logs went to GP in Durand. He used Poulan 54’s until he was finally talked into trying a Husky 77. Good grief what great saws those Huskys were. We actually survived using bow saws too.
About 12 years back, had a hurricane that blew a big white oak across my driveway. The next day a guy drove up with a trailer and wanted to bid on removing the tree. I said no thanks, I have a chainsaw and will start on it this afternoon. He was disappointed, so asked me what saw I had. I said a Poulan, and he laughed. He said it would take me a week with a Poulan, and pulled his Stihl out of the truck. We had been leaning on a big broken limb, maybe 12-13", and he said "watch this. I said OK, let me get my saw and I'll time us. Well, I beat him by 2 seconds. I had just tuned and sharpened my saw, so I wasn't too surprised.
I have the same one. But mine was built in 1985 in yugoslavia, Or TOMOS Slovenia. On the outside the swedish and Slovenian one are the same. But the Slovenian version has about 82CC's. Overall both are great saws. Also that old clutch drum ping when it's idling? LOVE IT!!
How much is one of those worth? I'm in my 70s and I have an SS77 that I bought new from a dealer in 1982. Can't start it since my shoulder replacements in 2010.
Chainsaws are kinda like sharks. They scare the hell out of me. That's why I love them.
It must take forever to film your videos!! It's so nice to see all the different angles you capture!! I love watching someone tackle something like this & make it work well - such an accomplishment!! Great job - always!! You placed that tree perfectly 🌟 God bless you and your family!! Ooops, commented too quickly - your son is so precious. Thanks for sharing 💞
It takes some time for sure! But I like the end product.
@@falllineridge So do we 😉 ❤ 👍
Are you into chainsaws?
sawmills
I just can't get over how much you remind me of my dad. He could fix anything. He always said a new chain never cut worth a damn. He always sharpen his by hand. Most of the cutting we did was for fire wood. He would cut some timber to make into lumber. He didn't have a sawmill so it was a lot more difficult. He would go to a mill that was close to us and purchase a ton of their drops for almost nothing. It was amazing how he would make such fine lumber out of their scraps. He did a lot of cabinet work on the side. I know he made some really nice ones, costumed made for people who had older farm houses. Generally things weren't square but when he finished a kitchen or bath, it looked better than any store bought cabinets. I do love your videos. At my age all I have are memories. I think of all the hours I spent with my dad from little up. We were great friends. He was a great dad. I tried to be a great dad to my kids. My son tells me I was far better than his friends fathers were. I saw your son, never leave him out. The things you do with him even little, he will carry with him the rest of his life. Yes, I fell asleep many times in the truck.
My daddy was the same. , he could fix anything even if he didn't have the parts he would always make it work. O and I swear he could catch fish out of a mud puddle and shoot big bucks in his sleep. It's like trophy animals and fish wanted him to get them. Im happy if I get a squirrel
I heated my house with hardwood for 10yrs, back in Indiana 75-85, cut and split by hand, had an Echo VL-452, hell of a saw, never failed! tks and best 2u
You are the first American I have heard pronounce Husqvarna some what correct. Cheers from Sweden.
Cheers, Niklas.
I have a L65 myself purchased new some 40 years ago, still runs like new, very powerful saw. Replaced fuel line, bar, pull rope, etc. Occasionally check the spark arrestor screen in the muffler muffler, and the bottom of the saw, the screen for the chain oiler. Great saw.
my 65 was new in 1978 and still runs great . never had a newer top end although a few hours on it .
That a great video , thank you ! Great saw . I love the close ups , coupled with minimal commentary . Very professional and very watchable . Liked & subscribed 👍
I bought one new in 79 and it was 80cc and in 80 I bought a new 44cc !
Great saws and reliable the 80 cc saw never missed a days work !!
The 44 cc missed several days over a starting issue !!
From the saw shop I used to go to , first thing I learned on any chainsaw and remover the flame arrestor like you did, with a good light look into the cylinder
I like this video. Well done sir. Saw sounds great for being 40 years old. Now I'm inspired to dig out a couple of the old timers, like yours, I'm my collection, and disassemble them and perk up the ports a bit with the grinders, and make them snort again!
Awesome vintage saw that you are putting to use. Thanks for sharing.
Nicely done! I loved the aerial shot when the tree fell too! I use my old 038 MAG II. It works well with a 24 " bar and chain. No Compression release like the new ones either. hard to start if it's below 20 degrees.
Nice one Wes! That looks like a good old Husky! As an amateur occasional user of Chainsaws (I've got 6, Gasoline & electric!) I find the usual thing that gives trouble first is the Oil feed system to the bar. Be great if you could do a video on fixing issues with that. Stay safe & well! 👍👍
Excellent work 👍👍👍 . Thanks for sharing
Beautiful piece of history,,,,, don't mind saying,,a bit envious
Thank you for showing 🤘
I have a beautiful full restored L65. Love that saw to death. Spent about 2 years looking for one, finally found it on a Northern California facebook group. hangs proudly in my garage
Good video - Great son. I love to watch the interaction please keep including him and your lovely wife. I've watched all your videos and am almost current. Your testimonies to our Great God and Savior are refreshing and encouraging - keep it up!
Jim
Nice video. I` m happy with my old still 38 magnum. With a sharp chain, it won't slow down. Cuts through a hickory log like it was lunchmeat.
Listen to the idle notes :^)
I like the chainsaw holster on your tractor.
12:49 Lovely job
Great video! I have owned and run Stihl saws for over forty years, but on a whim about 2 years ago I bought a Husqvarna 565 with 20" bar. Because I liked it so much I now own several Husky's and love them. They just plain rip! I might have to look for a vintage Husky after watching this. I also have a Wood-mizer sawmill, LT40 super with 42hp Kubota diesel.
It's the Germans (Stihl or Dolmar) VS the Swedes (Husqvarna and Jonsered)
I prefer Jonsered myself, my father prefers Stihl and Dolmar.
Fantastic video! Thanks for the great content.
Totally cool brother!! Love to see an old saw still getting it!
First chainsaw I purchased was "Husqvarna 65" made in Germany... single ring on piston.... started my own firewood business in 1980....yet cut & sold firewood on the side before then.... weekends & nights & days when I had a chance, even holidays....cut 100's of cords, yrs. & yrs.& yrs.... even did tree work with it....it's what made me buy Husqvarna saws everytime I needed a saw....smaller ones & larger ones....they all have proven to be simular as the first one, in late 70's or early 80's...shop full of them now at 72 yrs. old
Looks like a beast. Glad you could pick it up.
Besides being into saws- you are a great videographer! Nice shots, great editing, interesting composition of shots and content. I think your video was great as much for your technical skills with the camera and editing software as for your vision of composition and content. Thanks for posting.
Thank you, Kevin!
I have a 77 I bought in 1978 $450.00 it was a bow saw I changed it over to a bar. I cut fire wood in high school. I took the baffle out to make it loader . High school kids with glass packs LOL. Have lost the parts I would love to get it running.Brings back some memories I cut my knee open with that saw when it was bow saw . The government deemed them unsafe that's what I Was told that's why you can't buy the bows anymore . thanks for sharing .
Sounds and cuts really good!!! What a great find congrats to ya...
I bought a new Husky l 77 in about 1975. They were a good saw. After a few months I traded it for a new Husky 1100. That 1100 was a wildcat. The best balanced and powerful saw I ever ran.
i have one of those husqy 1100's in the basement , also A 65 and a 288
@@tjlee9901 Would the 1100 be 4 sale?
@@logdog8920 : i think its just good for parts . im not really into buying and selling .
@@logdog8920 : the cylinder has some fins missing at the top , otherwise i might have tried to get it running . someone was using it to power an alaska mill at some point but gave it to me knowing im into saws . i have a bigger husky for bucking big stuff , so i didnt really bother with it .
@@tjlee9901the 288 is my dream saw. Trade you a 266😁
..I clicked on this video as soon as I saw the 77!..I had a 77 several years ago, got it from the scrap yard of all places..no bar or chain. Got it running with a carb kit and a fuel line, put a used 24" bar and chain on it I had, and man, it really ripped!..much more than I expected..just no anti-vibe, but that's O.K...I used it as a firewood saw for a couple years, then it developed a rattle..still ran good..then, one day it just stopped mid-cut..took the P&C off and discovered the big end rod bearing had let go..so into a box it went. Miraculously, the P&C were still o.k., just needed a new crank..over the years, I've picked up 2 or 3 more 77 carcasses with good compression..maybe this video will give me the motivation to finally get around to getting a running 77 put together again :)..BTW, the easiest way to spot a 77 from a 65 is the spark plug sticking out the top of the 77-it's hid under the cover on a 65...I've seen lots of 65's over the years, and have several non-running 65's..I've been told a 65 and 77 bottom end, including crank, are the same as a 77, so maybe you could just swap the complete bottom end/housing from from one of those 65's to fix the 77..one thing I have noticed, though, is all 77's I have encountered have electronic ignition, and most 65's seem to have points..I would check for that if you do the swap, although you could likely change out the ignition as well..I would use as late-model 65 as I could find as the donor saw..as a final note, I always wondered why so many more people opted to buy the 65 over the 77, given that you have much more power with basically the same size/weight saw..was it that everybody was too cheap to pony up the extra $ to step up to the 77?..seems like it would have been very worthwhile, to me...I wonder the same thing when I see all the old 61's around and so few 66's and 266's..again, same basic saw, with much more power....
Love it sounds cacklly and rumbly you have fun now. As always good luck and God Bless.
Thumbs up for including the little guy! Good father.
My dad was a master feller, growing up he said never get on your knees! He was logger all of his life!
Been keeping my eye out for a 77. Have a 65 project that's close, really want a 77 too
My dad bought a huge jonsered back in 88' never fixed once. Tons of raw power husta beast of a saw
Looks good.and sounds great
excellent camerawork and editing. You're the Orson Welles of chainsaw videos
That baby is growing way to fast!!! And smart too!!!
..I think around 1985 or so was the last the 65 and 77 was built..and you will love the 24" bar on that 77..it will pull it with no problem, and a 24" balances out real nice on those saws.. :)
Nice find! That chain is definitely working for that big boy.
To make a homemade 77 we used to put a 380 top end on a 65... 😎
God bless you. I enjoy the videos !!
77 Husky is a bad boy. I cut a lot of pulpwood and short logs with one back in the early eighties. My daddy bought hi first one in the late 70's. I'm very happy for you I wish I could find a good 77. I see a few 65's here and there but a 77 is a rare gem.
Gotta admit that I’m not a big husky fan, but I absolutely love the sound of that saw. Looks like it might not be the fastest, but sometimes it’s not always about speed. Nice saw man
Theyre a lazy but authortive saw. Loads of torque but sadly not a whole pile of chain speed. Think they maxed out at 8000 rpm under no load and lug down to 5000 to 6000 when under load. These and the 65's had a great exhaust note
Your son is a real trip, these are the times you'll never forget, and I'm sure he enjoys "helping" you out.
He's hysterical. Funniest little guy I know.
I can relate to your love of old saws. I’m an old McCulloch fan. When you started pulling out all the old saws you have I just laughed. I’ve got more than I care to admit from the 60’s and 70’s. It’s an addicting hobby lol
I chuckled, too. "Baddest" chainsaw being a 77cc saw? Heck, a Wright C-50 or McCulloch 7-10A is in that range. Try going up to the McCulloch Super Pro 125 (the original steel-sleeved cylinder that can be bored over, but starts at 123cc), running at 11,000rpm and nearly 15hp. But yeah, when you have your eyes fixed on a certain vintage model, and it finally shows up and you're successful in grabbing it, it's like the jewel in the crown.
I am with you; it is an addiction; mcculloch, lombard, homelite and others. if it is vintage and mostly magnesium and aluminum, i am down.
I had both a Husqvarna 77 and a Sthil 056 Mag 2 . I put a lot of timber on the ground with both those saws. Other than that Mcculloch super pro 125 these were my all time favorite chainsaws .
I’m glad you happy with it! At the end of the day that matters most!
Best video yet. Thank you.
Thanks, John.
The 50's and 60's David Bradley chainsaws were monsters too !!
Wish I kept all the old Huskies that I used when I worked at the sawmill. The new ones are nice by the old ones were like holding a dirt bike. A lot of power.
The vibration is bad for your hands tho. The new saws are much smoother. After working with a 560xp the l65 feels like there are no anti vibes at all.
Lolol @ "holding a dirtbike".
That's a fact!
those 77s were some good saws. dad cut pulpwood and sawlogs with the 77s in the 70s and early 80s sometime they did put chain breaks on them --i would guess around 79-80 . i can recall running those some those myself . they were reliable, had gobs of torque. seems like most of them had the 24" bar and would pull it with ease even through tough hard-wood. they slowly replaces the stihl 041 supers on the logging job IIRC.
my 1978 husq 65 doesnt have the chain brake . came the next year i believe . still runs great although i mostly use a dolmar these days .
Nice Chainsaw.
Greetings from Germany
Peter
You have great talent and skills. You amaze me.
Thanks for watching, Nadine!
@@falllineridge I enjoy watching you in God's natural world and the talent and skills he gave you. You are very welcome. Thank you for sharing with me what I wish I could do. And I loved how excited your son was with his toy box. That was plain joy.
That child is just too precious.
Awesome Saw Husqvarna 1974 Was a Good Year 😀😮😀
I had a 77 a long time ago, it had horse power plenty! Wish I still had it!!
Good job. You do have some skills.
I love my husqvarna saws.. by the way I got my mill up and running again..👍 From Cadillac Michigan
Nice!
Looks like a great saw.
in old yougoslavia you had the same saw but it was called tomos 770. It was made by licence of husqvarna L77. I recently got one and it is a beast. Just need new dog for it but was thinking of putting 2 dogs because why not. But the issue is that I have to make them myself as you can't buy them basically
Your camera work is just as impressive as the saw.
Yep back in the day. That was the song that everybody wanted talking nearly 40 years ago
Man that runs good!
You have me looking for a 77 now!!
I had a L65 for years they were great saws almost indestructible, outside of a set of rings l never did anything but routine mantince and it ran as strong the day l sold it as the day l bought it.
Biggest saw I ran was a 066 Stihl. It was a daily user in our erosion control business.Wood bulkhead/Seawall. 96 cc on that saw
That is one badass saw!
I’m sure you know what to look for in the cylinder ( ever been run without oil?). Next inspect the piston and ring or rings , using a small screwdriver press on each piston ring which should push back at you!!
If all check out , compression test cold then hot is next!!
Good find you did well!!
*The Husky 77 is from 1974 and it's 77cc's, nice find on that one. Max RPM is only 8000 however those saws have alot of torque.*
torque monsters . they are the same as the 65 only a longer stroke .
That saws a beast!
Nice saw
Thanks for the videos brother
Have a great day
And
God bless
Just saying
That is a Great one glad I have one. I’ve saw 2 farmers spend $300 each repairing their 65 vs buying new saw. Classic saw 77. Dud get a logging tape and put a horseshoe nail on it.
That tape has got to Go!
Could you please tell me where you got parts for this saw. I have one and never have been able to find any
Why have I not heard of this channel🤷🏻♂️ SUB’d!
I inherited this saw from my grandfather. It’s a beast
A saw holster for your tractor? That has to be the best thing I've ever seen!
After my dad logged with a Husky 77 and I still have it after he passed away , Im sure we found a bill of sale in 1971 ,But i will have to recheck that after hearing your comments. Anyway the flywheel blew apart on me while I was using it , Does anyone know where I might be able to find one ? thank you
I still have my dad's Husqvarna 65 from 40 years ago. I guess i should get it out and run it a bit.
It was used very little.
That 77 hums like a sewing machine!
Those are affectionately called the Great Pumpkin around here.
Did not expect that to start
The vintage Husky 77 sure does RIP! 🤩
1st time seeing your videos and looking forward to the shed addition., will it be post and beam
I bought my first Husqvarna l65 back in 77, landed a big tree on it in 79 then bought another one, had that one until 85 then traded up for another number Husqvarna. Now I have 2019 550xp, pound for pound it will out cut my old l65 with half the weight and I sure do prefer the modern chain brake.....
I thought you had a pto winch......
Sometimes I think you are from 1950s Oregon logging family. You cut the mouth, started and checked the hinge, corrected, wedged, and finished it over. Unlike the deep woods, you trimmed the stump flush like proper in a small family wood lot so it wont be a trip hazard or foul a small skidder tractor. Great job!!!!
Those chips were nice even before sharpening. Husqvarna makes a really good saw. I bought one used (almost new) from an older man that just couldn't handle the saw's weight. It chews through logs like nothing I ever had. Now I am of the age that the weight is difficult for me. Oh well....
Love me some old saws!
Why did you fell the live tree instead of the dead standing? I could be mistaken, but the areal view appeared to show some DS, and for safety reasons I would have removed them. Cool saw.
I have a 266 and a 272, it sounds like a small difference but the power increase is substantial.
Saturday morning 3:15 AM looking at a saw repair. My life is sad..
Looks like my 77cc Husqvarna 380CD. Also made in 77
This saw was rehabed without any proper Sawyer Language being used !!!!....How incredible.....I liked the 2100's also.
..15:58..just saw all that pitting on the bottom of the saw..sooner or later, it will likely lead to an oil or fuel leak..that, with the break/damage you already noted, I would be on the lookout for a donor saw with a better bottom end..and have fun with it in the meantime!.. :)
I am fortunate enough to have a 77 with a bow. The thing is a beast. I'd like to have a dollar for every 65 that was in use during the hey day of five foot pulpwood.
My Husqvarna 77 was bought in 1981 and it's 1974 model . Old thunder her name ..😉👍
When I was a kid my father used to cut pulpwood and ply logs. Every little community in west central Georgia had a pulpwood yard and ply logs went to GP in Durand. He used Poulan 54’s until he was finally talked into trying a Husky 77. Good grief what great saws those Huskys were. We actually survived using bow saws too.
My dad still has a bow for a 65. I've never used it, don't want to.
About 12 years back, had a hurricane that blew a big white oak across my driveway. The next day a guy drove up with a trailer and wanted to bid on removing the tree. I said no thanks, I have a chainsaw and will start on it this afternoon. He was disappointed, so asked me what saw I had. I said a Poulan, and he laughed. He said it would take me a week with a Poulan, and pulled his Stihl out of the truck. We had been leaning on a big broken limb, maybe 12-13", and he said "watch this. I said OK, let me get my saw and I'll time us. Well, I beat him by 2 seconds. I had just tuned and sharpened my saw, so I wasn't too surprised.
@@falllineridge
I have a poulan bow saw heavy and loud I love it.
Loggers in the pulp wood business preferred saw. In middle Georgia at least.
i gave away my pioneer p1100 after i got my husqy 65 .
Хорошая старушка.Спасибо.
I have the same one. But mine was built in 1985 in yugoslavia, Or TOMOS Slovenia. On the outside the swedish and Slovenian one are the same. But the Slovenian version has about 82CC's. Overall both are great saws. Also that old clutch drum ping when it's idling? LOVE IT!!
How much is one of those worth? I'm in my 70s and I have an SS77 that I bought new from a dealer in 1982. Can't start it since my shoulder replacements in 2010.
Dude! I've got a 77 out in the barn!
good job!